This article needs additional citations for verification. (December 2014) (Learn how and when to remove this template message)
Top to bottom: Swedish Ag m/42B rifle, Egyptian Hakim rifle, Egyptian Rasheed carbine
|Place of origin||Egypt|
|Manufacturer||Ministry of Military Production, Factory 54|
|No. built||appx. 8000|
|Mass||4.19 kg (9 lb, 4 oz; unloaded)|
|Length||1035 mm (40.75 in)|
|Barrel length||520 mm (20.5 in)|
|Action||direct impingement, gas-operated|
|Feed system||10-round removable box magazine, with latching magazine release catch|
The Rasheed was designed by the Swedish engineer Erik Eklund, who based it on his previous Hakim Rifle (8×57mm Mauser cartridge), which was itself a slightly modified version of the Swedish Ag m/42 rifle (6.5×55mm Swedish cartridge).
The carbine resembles the Soviet SKS carbine, particularly in the permanently attached pivoting-blade bayonet, which appears identical to its Russian counterpart. The 12-inch (305 mm) blade bayonet pivots from a mount under the barrel, back into a recessed groove in the forend stock.
The carbine features a rear ladder sight, with a "battle" position for short-range fire as well as increments of 100 to 1000 metres, although the latter distance greatly exceeds the 300-metre effective range of the weapon.
The semi-automatic mechanism is gas-operated through the direct impingement system. The Egyptian training manual had users use stripper clips to reload. However, the hot gas would heat up the receiver and cause burns when fingers would touch the receiver.