A paver (road paver finisher, asphalt finisher, road paving machine) is a piece of construction equipment used to lay asphalt on roads, bridges, parking lots and other such places. It lays the asphalt flat and provides minor compaction before it is compacted by a roller.
The asphalt paver was developed by Barber Greene Co., that originally manufactured material handling systems. In 1929 the Chicago Testing Laboratory approached them to use their material loaders to construct asphalt roads. This did not result in a partnership but Barber Greene did develop a machine based on the concrete pavers of the day that mixed and placed the concrete in a single process. This setup did not prove as effective as desired and the processes were separated and the modern paver was on its way. In 1933 the independent float screed was invented and when combined with the tamper bar provided for uniform material density and thickness. Harry Barber filed for a patent a "Machine for and process of laying roads" on 10 April 1936 and received patent U.S. Patent 2,138,828 on 6 December 1938. The main features of the paver developed by Barber Greene Co. have been incorporated into most pavers since, although improvements have been made to control of the machine.
The asphalt is added from a dump truck or a material transfer unit into the paver's hopper. The conveyor then carries the asphalt from the hopper to the auger. The auger places a stockpile of material in front of the screed. The screed takes the stockpile of material and spreads it over the width of the road and provides initial compaction.
The paver should provide a smooth uniform surface behind the screed. In order to provide a smooth surface a free floating screed is used. It is towed at the end of a long arm which reduces the base topology effect on the final surface. The height of the screed is controlled by a number of factors including the attack angle of the screed, weight and vibration of the screed, the material head and the towing force.
To conform to the elevation changes for the final grade of the road modern pavers use automatic screed controls, which generally control the screed's angle of attack from information gathered from a grade sensor. Additional controls are used to correct the slope, crown or superelevation of the finished pavement.
In order to provide a smooth surface the paver should proceed at a constant speed and have a consistent stockpile of material in front of the screed. Increase in material stockpile or paver speed will cause the screed to rise resulting in more asphalt being placed therefore a thicker mat of asphalt and an uneven final surface. Alternatively a decrease in material or a drop in speed will cause the screed to fall and the mat to be thinner.
The need for constant speed and material supply is one of the reasons for using a material transfer unit in combination with a paver. A material transfer unit allows for constant material feed to the paver without contact, providing a better end surface. When a dump truck is used to fill the hopper of the paver, it can make contact with the paver or cause it to change speed and affect the screed height.
Large freeways are often paved with concrete and this is done using a slipform paver. Trucks dump loads of readymix concrete in heaps along in front of this machine and then the slipform paver spreads the concrete out and levels it off using a screed.
This section contains an unencyclopedic or excessive gallery of images.
- "History of Asphalt Pavers". europe-construction-equipment.com. Retrieved 11 November 2013.
- Heide, Lance. "History of the Asphalt Paver". Maintenance Superintendents Association. Retrieved 11 November 2013.
- Barber, Harry H. "Machine for and process of laying roads". Barber Greene Co. Retrieved 11 November 2013.
- "Asphalt Paver". Pavement Interactive. 7 April 2009. Retrieved 23 March 2013.
- Certified Technician Program Training Manual for Hot Mix Asphalt Paving. Chapter 3: Indiana Department of Transportation. 2008. Retrieved 11 April 2013.CS1 maint: location (link)
- "STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MAINTENANCE OF HIGHWAYS, STREETS, AND BRIDGES" (PDF). Texas Department of Transportation. 2004. pp. 191–194. Retrieved 23 March 2013.
|Wikimedia Commons has media related to Pavers (vehicles).|