This article needs additional citations for verification. (August 2012) |
A nanoprobe is an optical device developed by tapering an optical fiber to a tip measuring 100 nm = 1000 angstroms wide.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/15/APS_-_Nanoprobe.jpg/300px-APS_-_Nanoprobe.jpg)
Nanoprobes can be used in bioimaging to provide improved contrast and spatial resolution of cells and tissues.[1] Types of nanoprobes used for bioimaging include fluorescence, chemiluminescence, and photoacoustic imaging.[1]
Introduction to Raman Scattering
editWhen light interacts with matter, a phenomenon known as Raman scattering[2] occurs, which provides important information about the vibrational frequencies of the sample. This phenomenon happens when a sample's molecules interact with incident light, scattering it. Every material has a different Raman spectrum because of the information the scattered light has about the vibrational modes of the constituent molecules
Raman scattering: The reflection of light from a laser-lit object.
editA very thin coating of silver nanoparticles helps to enhance the Raman scattering effect of the light. (The phenomenon of light reflection from an object when illuminated by a laser light is referred to as Raman scattering.) The reflected light demonstrates vibration energies unique to each object (samples in this case), which can be characterized and identified.
Silver nanoparticles
edit- Silver nanoparticles[3] have attracted significant attention due to their chemical stability, high conductivity, localized surface plasmon resonance, and catalytic activity.
- The silver nanoparticles in this technique provides for the rapid oscillations of electrons, adding to vibration energies, and thus enhancing Raman Scattering—commonly known as surface-enhanced Raman scattering (SERS).
- These SERS nanoprobes produce higher electromagnetic fields enabling higher signal output—eventually resulting in accurate detection and analysis of samples.
Enhanced signal output
editThe term nanoprobe also refers more generically to any chemical or biological technique that deals with nanoquantitles, that is, introducing or extracting substances measured in nanoliters or nanograms rather than microliters or micrograms. For example:
- Introducing nanoparticles in aqueous solution to serve as nanoprobes in electrospray ionization mass spectrometry[4]
- Extracting nanoquantities of neurochemicals via in vivo microdialysis[5]
- Using gold-based metallic nanoprobes for Theranostics (therapeutic diagnostics)[6]
In semiconductor manufacturing, nanoprobing is showing potential for conventional IC failure analysis and debugging, as well as for transistor design, circuit, and process development, and even for yield engineering.[7]
Use of nanoprobe in the detection of diabetes
editNanotechnology solutions can be used in the diagnosis and early treatment of diabetes. There are two types of diabetes: type 1[8] and type 2.[8] Regular checking of blood glucose involves a painful mechanism by piercing the finger. Still, New nanotechnology innovations have made it possible to check blood sugar non-invasively, leading to the early detection of diabetes.[9] Nanoprobe devices have improved the insulin monitoring system, which is necessary for diabetes management, gene therapy and Islet cell screening, pre-transplantation.[9]
There are two primary methods for enhancing glucose sensors with nanotechnology
edit- Nano-enhanced Glucose Sensors:[10]
- Two main ways to make glucose sensors better with nanotech.
- First way: Use regular sensor parts but add tiny nanostructured stuff.
- Advantages: Bigger surface area means faster response and better activity.
- If used for continuous monitoring, may face similar issues to current sensors like fouling and shorter lifespan due to immune response.
- Nanoscale Sensor Fabrication:[10]
- Second way: Make sensors super small in all dimensions.
- Advantages: Can be injected, easier to use.
- Might last longer as they're less likely to trigger the body's immune response.
- But, they're quite different from current sensors and need more testing before they're ready for patients.
See also
editReferences
edit- ^ a b Jeong K, Kim Y, Kang CS, Cho HJ, Lee YD, Kwon IC, et al. (April 2016). "Nanoprobes for optical bioimaging". Optical Materials Express. 6 (4): 1262–1279. doi:10.1364/OME.6.001262.
- ^ "Raman scattering", Wikipedia, 2024-02-10, retrieved 2024-04-21
- ^ "Silver", Wikipedia, 2024-04-10, retrieved 2024-04-21
- ^ Wu HF, Agrawal K, Shrivas K, Lee YH (December 2010). "On particle ionization/enrichment of multifunctional nanoprobes: washing/separation-free, acceleration and enrichment of microwave-assisted tryptic digestion of proteins via bare TiO2 nanoparticles in ESI-MS and comparing to MALDI-MS". Journal of Mass Spectrometry. 45 (12): 1402–1408. Bibcode:2010JMSp...45.1402W. doi:10.1002/jms.1855. PMID 20967754.
- ^ Khandelwal P, Beyer CE, Lin Q, Schechter LE, Bach AC (July 2004). "Studying rat brain neurochemistry using nanoprobe NMR spectroscopy: a metabonomics approach". Analytical Chemistry. 76 (14): 4123–4127. doi:10.1021/ac049812u. PMID 15253652.
- ^ Panchapakesan B, Book-Newell B, Sethu P, Rao M, Irudayaraj J (December 2011). "Gold nanoprobes for theranostics". Nanomedicine. 6 (10): 1787–1811. doi:10.2217/nnm.11.155. PMC 3236610. PMID 22122586.
- ^ Ukraintsev V (2014). "Modern trends in processing, metrology, and control for integrated circuits". SPIE Newsroom. doi:10.1117/2.1201312.005247.
- ^ a b "Type 1 vs Type 2 Diabetes | UVA Health". uvahealth.com. Retrieved 2023-11-30.
- ^ a b Lemmerman LR, Das D, Higuita-Castro N, Mirmira RG, Gallego-Perez D (June 2020). "Nanomedicine-Based Strategies for Diabetes: Diagnostics, Monitoring, and Treatment". Trends in Endocrinology and Metabolism. 31 (6): 448–458. doi:10.1016/j.tem.2020.02.001. PMC 7987328. PMID 32396845.
- ^ a b Cash KJ, Clark HA (December 2010). "Nanosensors and nanomaterials for monitoring glucose in diabetes". Trends in Molecular Medicine. 16 (12): 584–593. doi:10.1016/j.molmed.2010.08.002. PMC 2996880. PMID 20869318.