The NER Class P (LNER Class J24) was a class of 0-6-0 steam locomotives of the North Eastern Railway.[1][2] They were designed by Wilson Worsdell for mineral traffic.

NER Class P
LNER Class J24
Type and origin
Power typeSteam
DesignerWilson Worsdell
BuilderNER Gateshead Works (50)
NER Darlington Works (20)
Build date1894-1898
Total produced70
Specifications
Configuration:
 • Whyte0-6-0
Gauge4 ft 8+12 in (1,435 mm)
Driver dia.4 ft 7.25 in (1.403 m)
Loco weight38.5 long tons (39.1 t) (ns)
39.55 long tons (40.18 t) (su)
Tender weight36.95 long tons (37.54 t)
Fuel typecoal
Boiler pressure160 psi (1,100 kPa)
Cylinderstwo inside
Cylinder size18 in × 24 in (460 mm × 610 mm) (ns)
18.5 in × 24 in (470 mm × 610 mm) (su)
Performance figures
Tractive effort19,140 lbf (85,100 N) (18" cylinders)
20,220 lbf (89,900 N) (18½" cylinders)
Career
Withdrawn1933-1951
DispositionAll Scrapped none preserved

Modifications

edit

As built, the locomotives had slide valves but 20 were fitted with piston valves and superheaters between 1914 and 1920. The cylinder bore was increased by half an inch at the same time.

In the infobox (right) 'ns' denotes non-superheated and 'su' denotes superheated. Some locomotives later had their superheaters removed but the piston valves were retained.

British Railways

edit

Thirty-four locomotives survived into British Railways ownership in 1948 and their BR numbers were 65600-65644 (with gaps).

Withdrawal

edit

Withdrawals started under LNER ownership in 1933. British Railways quickly withdrew the remaining locomotives and all had gone by the end of 1951. None were preserved.

References

edit
  1. ^ Ian Allan (1948). ABC of British Railways Locomotives. Vol. Part 4. p. 41.
  2. ^ "The W. Worsdell J24 (NER Class P) 0-6-0 Locomotives". LNER Encyclopedia.