The M4 bayonet was introduced in 1944 for use with the M1 carbine.[1] It was built on the M3 fighting knife.[1]
| M4 Bayonet | |
|---|---|
 U.S. military bayonets of World War II. Shown are the M1905 Bayonet (blued version), M1 Bayonet, M1905E1 Wedge Point Bayonet (cut down version of the M1905) and the M4 Bayonet with leather handle for the M1 Carbine (bottom). | |
| Type | Bayonet |
| Place of origin | United States |
| Service history | |
| In service | 1944–1970s |
| Used by | US Military |
| Wars | |
| Production history | |
| Designed | 1944 |
| Manufacturer | Leather handle 1944-1945
Plastic handle 1954–late 1960s
|
| Produced | 1944–late 1960s |
| Variants |
|
| Specifications | |
| Length | 11.75 in (29.8 cm) |
| Blade length | 6.75 in (17.1 cm) |
| Blade type | Spear Point |
| Scabbard/sheath | M8 & M8A1 |
Description edit
The M4 bayonet, like the M3 fighting knife that preceded it, was designed for rapid production using a minimum of strategic metals and machine processes, it used a relatively narrow 6.75 in (17.1 cm) bayonet-style spear-point blade with a sharpened 3.5 in (8.9 cm) secondary edge.[1] The blade was made of carbon steel, and was either blued or parkerized. Production of the grooved wooden handle was later simplified by forming the grip of stacked leather washers that were shaped by turning on a lathe, then polished and lacquered. The steel crossguard had a bayonet muzzle ring and the bayonet fastener is on the pommel. Later models used a black molded plastic handle. The basic design would be used for the later M5, M6, and M7 bayonets.[1]
M8 and M8A1 Scabbard edit
There are two variations of this scabbard, both with an olive drab fiberglass body with steel throat. The early version M8 scabbard only had a belt loop and lacked the double hook that earlier bayonet scabbards had for attaching to load carrying equipment such as the M1910 Haversack. The improved M8A1 scabbard manufactured later in WW II has the M1910 bent wire hook. The scabbard throat flange is stamped "US M8" or "US M8A1" on the flat steel part along with manufacturer initials. Some M8 scabbards were later modified by adding the M1910 hook. Later M8A1 scabbards were manufactured with a modified extended tab on the web hanger to provide more clearance for the M5 bayonet which rubbed against the wider bayonet handle. This sheath is correct for all post-war US bayonets including the M4, M5, M6, and M7. It was also used with the M3 fighting knife.
See also edit
- M3 fighting knife
- M5 bayonet used by the M1 Garand
- M6 bayonet used by the M14 rifle
- M7 bayonet used by the M16 rifle
- M9 bayonet
References edit
- ^ a b c d "U.S. M4 thru M7 Series Bayonets and Foreign Copies". Worldbayonets.com. Retrieved 22 June 2018.