The Lambretta Model C was the third production Scooter made by Innocenti's Lambretta. The Model C was the first Lambretta scooter to be imported the United Kingdom. The C is seen as a more reliable bike than previous models although it remained very similar to its predecessors.

Lambretta Model C
ManufacturerLambretta
Production1950–1951
PredecessorLambretta Model B
SuccessorLambretta Model D
ClassScooter
Engine123 cc, two stroke, single cylinder
Bore / stroke52 mm × 58 mm
Top speed44 mph (71 km/h)
Power4.3 hp (3 kW; 4 PS)
Transmission3-speed, handlebar twist grip
SuspensionSpring suspension (front & rear)
BrakesDrum
Tyres4.00 × 8
DimensionsL: 1730 mm
W: 730 mm
H: 920 mm
Weight
  • Model C 70kg
  • Model LC 80kg
 (dry)
Fuel consumption
  • Model C110 mpg‑imp (2.6 L/100 km; 92 mpg‑US)
  • Model LC141 mpg‑imp (2.00 L/100 km; 117 mpg‑US)

Design

edit

Starting with the Model C Lambretta frames would be made of tube. The engine was once again a 123cc air-cooled engine but the block was this time was integrated to the frame with the spring suspension. The same carburetor, a Dell'Orto MA16, was used on the Model C as on the previous bikes. A 3 speed gearbox was also used as with the other models but the frame was made of a single piece of tube. The Model C had drum brakes, Front and Rear, and the head light was mounted on the front of the frame below the handlebars and the rear light was smaller and placed above the number plate. The Model C came with many more options than previous versions including rear seat, bolt on leg shields, a horn cover, speedometer, floor mats and a spare wheel. It came in 4 different colours, Beige, Green, Grey and Red.[1][2]

Sales and production

edit

Lambretta made 87,500 Model C's and 42,500 Model LC's, this is much higher than previous models.[3]

Model LC

edit

The Model LC was a Model C with full leg shields, side panels and rear running boards, the first Lambretta to do so, the 'L' stands for Lusso, meaning luxury in English. The side panel featured an access panel so the rider could turn on the choke without removing the side panel. Due to the side panels direct engine cooling could not work, so the flywheel gained cooling fins.[4]

References

edit
  1. ^ "Lambretta Club of Great Britain".
  2. ^ "Lambretta Official Website".
  3. ^ "Cambridge Lambretta".
  4. ^ "Lambretta Official Website".
edit