The Lancashire and Yorkshire Railway (LY&R) Class 111 0-4-4T were designed by Kitson and Company for William Barton Wright, who had a requirement for a short-distance passenger tank locomotive.[1]

LY&R Barton Wright 0-4-4 tank
L&YR 0-4-4T No. 112 with long side tanks
Type and origin
Power typeSteam
DesignerKitsons / William Barton Wright
Builder
Build date1877–1886
Total produced72
Specifications
Configuration:
 • Whyte0-4-4T
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.5 ft 8 in (1.727 m)
Trailing dia.3 ft 1+12 in (0.953 m)
Wheelbase  ​
 • Axle spacing
(Asymmetrical)
  • 7 ft 7 in (2.31 m) +
  • 9 ft 10 in (3.00 m) +
  • 5 ft 6 in (1.68 m)
 • Engine22 ft 11 in (6.99 m)
Loco weight49 long tons 12 cwt (111,100 lb or 50.4 t)
Water cap.1,110 imp gal (5,000 L; 1,330 US gal)[a]
Boiler:
 • Diameter4 ft 2 in (1.27 m)
 • Tube plates10 ft 6 in (3.20 m)
Boiler pressure140 psi (0.97 MPa)
Heating surface1,057 sq ft (98.2 m2)
CylindersTwo, inside
Cylinder size17+12 in × 26 in (444 mm × 660 mm)
Performance figures
Tractive effort13,930 lbf (62.0 kN)[b][1]
Career
OperatorsLancashire and Yorkshire Railway
NumbersSee table
DeliveredApril 1877
Withdrawn1901–1921
Details for original Kitson batch except where noted.[2]

Design and construction

edit

On his appointment in to the LY&R in 1875 Barton Wright inherited over 800 engines of more than 30 different types and many were insufficiently powerful for their required duties and resolved the L&YR would target achieving a minimum number of standard locomotive types with interchangeable components in order to meet future traffic needs.[3] He addressed the most urgent needs for freight locomotives and higher end passenger locomotives first before addressing the requirement for a short-distance passenger locomotive in 1877.[4] The 0-4-4T was essentially a Kitson design with 5 ft 8 in (1.73 m) coupled wheels, and Kitson delivered the first 12 locomotives between April 1877 and July 1878. The first pair, Nos. 111 & 112 had extended side tanks whose weight restricted the route availability of the engines so subsequent locomotives were delivered with shorter side tanks.[2]

Subsequent batches were ordered from different manufactures and some included some detail variations. Ten came from Dübs & Co. from September 1878. Ten more from Neilson & Co. from August 1879 but had even smaller tanks and a water capacity of 900 imp gal (4,100 L; 1,100 US gal) and had a total working weight of 46 long tons 4 cwt (103,500 lb or 46.9 t). The final batch of 40 from Sharp, Stewart & Co. arrived between October 1885 and August 1886 with a working weight of 52 long tons 4 cwt (116,900 lb or 53 t).[2]

The rear bogie, of an Adams type but with Timmis springs compressed to 30 long cwt (3,400 lb or 1,500 kg) replacing the indiarubber side check springs and the large indiarubber pad being omitted. It was said to give "steady running" at the rear of the locomotive.[2]

Table of orders and numbers[5]
Year Manufacturer Serial Nos. L&Y numbers Notes
1877 Kitson & Co. 2116–2117 111–112 Long side tanks
1878 Kitson & Co. 2216–2225 41, 43, 49, 604, 613, 628, 633–634, 636, 642
1878 Dübs & Co. 1150–1159 55–56, 60–61, 67, 71, 74, 79, 83, 85
1879 Neilson & Co. 2370–2379 86, 89, 93–94, 99, 109, 113, 115, 118, 665
1885 Sharp, Stewart & Co. 3299–3308 906–915
1885–86 Sharp, Stewart & Co. 3309–3318 916–925 Renumbered 2, 7, 17–18, 20, 28, 35, 517–519 in 1886
1886 Sharp, Stewart & Co. 3319–3338 14, 226, 616, 713, 614, 617, 625, 637, 3, 6, 8, 12, 19, 29, 480–481, 227, 230, 9, 221

Service

edit

The original locomotives, Nos. 111 and 112 with long side tanks were found to be heavy and generally were allocated to pilot duties at Manchester Victoria.[6] Others were initially allocated for expresses from Manchester to Leeds, Hellifield and Manchester before later being displayed by 4-4-0 tender locomotives to local services.[7] Bulleid, in the biography The Aspinall Era the class is commended on "doing grand work".[1]

Notes

edit
  1. ^ Kitson and Dübs engines with short tanks; Neilson engines had 900 imperial gallons (4,100 L; 1,100 US gal) tanks
  2. ^ Figure applies to later Sharp Stewart Locomotives

References

edit
  1. ^ a b c Bulleid (1967), p. 103.
  2. ^ a b c d Marshall (1972), p. 91.
  3. ^ Bulleid (1967), pp. 76–77.
  4. ^ Marshall (1972), p. 85,88,91.
  5. ^ Baxter (1982), pp. 50–51.
  6. ^ Lane (2010), p. 36.
  7. ^ Ahrons (1927), p. 218.

Sources and further reading

edit
  • Ahrons, E.L. (1927). The British Steam Railway Locomotive 1825-1925. Amen Corner, London: Locomotive Publishing Co. OCLC 2329259. OL 6715902M.
  • Baxter, Bertram (1982). Baxter, David (ed.). British Locomotive Catalogue 1825–1923, Volume 3B: Lancashire and Yorkshire Railway and its constituent companies. Ashbourne, Derbyshire: Moorland Publishing Company. ISBN 0-903485-85-0.
  • Bulleid, H.A.V. (1967). The Aspinall Era. Ian Allan Ltd.
  • Lane, Barry C. (2010). Lancashire & Yorkshire Railway Locomotives. Pendragon. ISBN 9781899816170.
  • Marshall, John (1972). The Lancashire & Yorkshire Railway, volume 3. Newton Abbot: David & Charles. ISBN 0-7153-5320-9.