The Kelly-D is an American homebuilt aircraft that was designed by Dudley R. Kelly of Versailles, Kentucky, in 1981. When it was available, the aircraft was supplied in the form of plans for amateur construction. Aircraft Spruce & Specialty Co still provides some spruce wing parts for the design.[2][3][4]

Kelly-D
Role Homebuilt aircraft
National origin United States
Designer Dudley R. Kelly
Introduction 1981
Status Plans available (2014)[1]
Number built 20
Developed from Hatz CB-1

Dudley R. Kelly died on 20 September 1998. After his death, his widow, Thelma Kelly continued selling plans for a time; they are now sold by the Hatz Biplane Association.[1][5]

Design and development

edit

The Kelly-D is a development of the Hatz CB-1, but with more wingspan and fuselage length, and with more cockpit space for larger pilots. It features a strut-braced biplane layout, two seats in separate tandem open cockpits with individual windshields, fixed conventional landing gear and a single engine in tractor configuration.[2]

The aircraft is made from a combination of 4130 steel tubing and wood, with all surfaces covered in doped aircraft fabric. Its 26.30 ft (8.0 m) span wing is made with a spruce structure and has a wing area of 230.00 sq ft (21.368 m2). The wings are detachable for ground transportation and storage. The standard engine used is the 115 hp (86 kW) Lycoming O-235 four stroke powerplant.[2][3]

The Kelly-D has a typical empty weight of 925 lb (420 kg) and a gross weight of 1,500 lb (680 kg), giving a useful load of 575 lb (261 kg). With full fuel of 24 U.S. gallons (91 L; 20 imp gal) the payload for pilot, passenger and baggage is 431 lb (195 kg).[2]

The designer estimated the construction time from the supplied kit as 4000 hours.[2] In 1983, it could be built, with a used engine, for about US$8,000.[6]

Operational history

edit

By 1998 the Dudley reported that 20 kits were completed and flying.[2]

In January 2014, 13 examples were registered in the United States with the Federal Aviation Administration, although a total of 16 had been registered at one time. Also in 2014 there was one registered with Transport Canada.[7][8]

Specifications (Kelly-D)

edit

Data from AeroCrafter[2]

General characteristics

  • Crew: one
  • Capacity: one passenger
  • Length: 19 ft 3 in (5.87 m)
  • Wingspan: 26 ft 4 in (8.03 m)
  • Wing area: 230.0 sq ft (21.37 m2)
  • Empty weight: 925 lb (420 kg)
  • Gross weight: 1,500 lb (680 kg)
  • Fuel capacity: 24 U.S. gallons (91 L; 20 imp gal)
  • Powerplant: 1 × Lycoming O-235 four cylinder, air-cooled, four stroke aircraft engine, 115 hp (86 kW)
  • Propellers: 2-bladed fixed pitch

Performance

  • Maximum speed: 100 mph (160 km/h, 87 kn)
  • Cruise speed: 90 mph (140 km/h, 78 kn)
  • Stall speed: 40 mph (64 km/h, 35 kn)
  • Range: 275 mi (443 km, 239 nmi)
  • Rate of climb: 825 ft/min (4.19 m/s)
  • Wing loading: 6.5 lb/sq ft (32 kg/m2)

References

edit
  1. ^ a b Brownlow, Chuck (n.d.). "Plans". Retrieved June 22, 2014.
  2. ^ a b c d e f g Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 182. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
  3. ^ a b Aircraft Spruce & Specialty Co (2014). "Kelly-D Parts". Retrieved January 7, 2014.
  4. ^ Aerofiles (March 7, 2009). "K". Retrieved January 7, 2014.
  5. ^ Wilkinson, Lorin (January 15, 2014). "Remembering Dudley Kelly". American Hatz Association. Retrieved January 7, 2014.
  6. ^ "15 Handsome Homebuilts" July, 1983, Popular Mechanics, p.117, retrieved from Google Books June 21, 2020
  7. ^ Federal Aviation Administration (January 7, 2014). "Make / Model Inquiry Results". Retrieved January 7, 2014.
  8. ^ Transport Canada (January 7, 2014). "Canadian Civil Aircraft Register". Archived from the original on July 18, 2011. Retrieved January 7, 2014.
edit