ISO/IEC JTC 1/SC 28 Office equipment is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications within the field of office equipment and products, and systems composed of combinations of office equipment. The group's main focus lies within the area of printers and copiers. The international secretariat of ISO/IEC JTC 1/SC 28 is the Japanese Industrial Standards Committee (JISC) located in Japan.[1]

History

edit

ISO/IEC JTC 1/SC 28 was established in 1989 at the JTC 1's second Plenary in Paris, France. The creation of the subcommittee came as a result of the proposal for a subcommittee on office equipment that was submitted by Japan, and accepted by JTC 1. At this plenary, the scope of ISO/IEC JTC 1/SC 28 was agreed upon, and has remained the scope of the subcommittee throughout its history. The initial secretariat of ISO/IEC JTC 1/SC 28 was the Swiss Association for Standardization (SNV), located in Switzerland. However, in 1997, the Brazilian National Standards Organization (ABNT), located in Brazil, became the new secretariat. In October 2002, the secretariat position was succeeded by JISC.[2]

Scope

edit

The scope of ISO/IEC JTC 1/SC 28 is “Standardization of basic characteristics, test methods and other related items, excluding such interfaces as user system interfaces, communication interfaces and protocols, of office equipment and products such as Printers, Copying Equipments, Digital scanners, Facsimile equipment and systems composed of combinations of office equipment”.[3][4]

Structure

edit

ISO/IEC JTC 1/SC 28 is made up of one advisory group, ISO/IEC JTC 1/SC 28/AG, and four active working groups (WGs), each of which carries out specific tasks in standards development within the field of office equipment. Working groups can be disbanded if the group's working area is no longer applicable to standardization needs, or established if new working areas arise. The focus of each working group is described in the group's terms of reference. Active working groups of ISO/IEC JTC 1/SC 28 are:[4][5]

Working Group Working Area
ISO/IEC JTC 1/SC 28/WG 2 Consumables
ISO/IEC JTC 1/SC 28/WG 3 Productivity
ISO/IEC JTC 1/SC 28/WG 4 Image quality assessment
ISO/IEC JTC 1/SC 28/WG 5 Office colour

Collaborations

edit

ISO/IEC JTC 1/SC 28 works in close collaboration with a number of other organizations or subcommittees, both internal and external to ISO or IEC, in order to avoid conflicting or duplicative work. Organizations internal to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 28 include:[4][6]

  • ISO/IEC JTC 1, Information technology
  • ISO/TC 6, Paper, board and pulps
  • ISO/TC 42, Photography
  • ISO/TC 130, Graphic technology
  • ISO/TC 130/WG 2, Prepress data exchange
  • ISO/TC 130/WG 3, Process control and related metrology
  • ISO/TC 171, Document management applications
  • ISO/TC 171/SC 1, Quality
  • ISO/TC 171/SC 2, Application issues
  • IEC TC 100/TA 2, Audio, video, and multimedia systems and equipment; Colour measurement and management

Some organizations external to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 28, include:

Member countries

edit

Countries pay a fee to ISO to be members of subcommittees.[7]

The 11 "P" (participating) members of ISO/IEC JTC 1/SC 28 are: Austria, China, Germany, Italy, Japan, Republic of Korea, Netherlands, Philippines, Russian Federation, United Kingdom, and United States of America.[1]

The 21 "O" (observing) members of ISO/IEC JTC 1/SC 28 are: Argentina, Belgium, Bosnia and Herzegovina, Czech Republic, Finland, France, Ghana, Hungary, India, Indonesia, Islamic Republic of Iran, Kazakhstan, Kenya, Malaysia, Poland, Romania, Saudi Arabia, Serbia, South Africa, Switzerland, and Thailand.

Published standards

edit

ISO/IEC JTC 1/SC 28 currently has 50 published standards within the field of office equipment, including:[8][9]

ISO/IEC Standard Title Status Description WG
ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components Published (2004) Specifies the evaluation of toner cartridge yield for toner containing cartridges for monochrome, electrophotographic printers[10] 2
ISO/IEC 19798 Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components Published (2007) “Defines a method for testing and calculation of average yield measured in the number of standard pages for a colour toner cartridge and specific printer printing system in a semi-continuous mode under a defined set of conditions”[11] 2
ISO/IEC 24711 Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components Published (2007) ISO Standards for colour ink jet printers. Defines a method for testing and calculation of average yield measured in the number of standard pages for a colour inkjet cartridge and a specific printer printing in a semi-continuous mode under a defined set of conditions”[12] 2
ISO/IEC 24734 Information technology – Office equipment – Method for measuring digital printing productivity Published (2014) “Specifies a method for measuring the productivity of digital printing devices with various office applications and print job characteristics”[13] 3
ISO/IEC 24735 Information technology – Office equipment – Method for measuring digital copying productivity Published (2012) Specifies a method for measuring copying device and multifunctional device productivity[14] 3
ISO/IEC TS 24790 Information technology – Office equipment – Measurement of image quality attributes for hardcopy output – Monochrome text and graphic images Published (2012) Specifies device-independent image quality attributes, measurement methods, and analytical procedures for describing the quality of output images from hardcopy devices[15] 4
ISO/IEC TS 29112 Information technology – Office equipment – Test charts and methods for measuring monochrome printer resolution Published (2012) Defines the methods for the measurement of print quality characteristics contributing to the perceived resolution of reflection mode monochrome printed pages produced by digital electro-photographic printers[16] 4
ISO/IEC TR 29186 Information technology – Office equipment – Test method of color gamut mapping algorithm for office color softcopy and hardcopy Published (2012) Supplement to CIE 156:2004, and is applicable for use in evaluating the color gamut mapping algorithms for office color softcopy and hardcopy equipment[17] 5
ISO/IEC 24700 Quality and performance of office equipment that contains reused components Published (2005) Specifies product characteristics for use in an original equipment manufacturer's or authorized third party's declaration of conformity to demonstrate that a marketed product that contains reused components performs equivalently to a product made of new components, meeting equivalent to new component specifications and performance criteria, and continues to meet safety and environmental criteria required by responsible built products[18]
ISO/IEC 28360 free Information technology – Office equipment – Determination of chemical emission rates from electronic equipment Published (2012) Specifies the methods to determine chemical emission rates of analyte from information and communication technology and consumer electronics equipment during intended operation in an Emission Test Chamber (ETC)[19][20]

See also

edit

References

edit
  1. ^ a b ISO. "ISO/IEC JTC 1/SC 28 – Office Equipment". Retrieved 2013-10-18.
  2. ^ ISO (2012). "ISO/IEC JTC 1 Standing Document No. 2: History" (2 ed.). ISO/IEC: 65. {{cite journal}}: Cite journal requires |journal= (help)
  3. ^ ISO. "JTC 1/SC 28". Retrieved 2013-10-18.
  4. ^ a b c Saito, Akira; Sugiyama, Motokuni (2012-09-25). Business Plan for ISO/IEC JTC 1/SC 28 Office Equipment (PDF) (Business Plan). Retrieved 2013-10-18.
  5. ^ ISO. "ISO/IEC JTC 1/SC 28". Retrieved 2013-10-31.
  6. ^ ISO. "ISO/IEC JTC 1/SC 28". Retrieved 2013-10-18.
  7. ^ ISO (June 2012). "III. What Help Can I Get from the ISO Central Secretariat?". ISO Membership Manual (PDF). ISO. pp. 17–18. Retrieved 2013-07-12.
  8. ^ ISO. "Standards Catalogue: ISO/IEC JTC 1/SC 28". Retrieved 2013-10-18.
  9. ^ ISO/IEC. "Freely Available Standards". Retrieved 2013-10-11.
  10. ^ ISO (2009-09-30). "ISO/IEC 19752:2004". Retrieved 2013-10-18.
  11. ^ ISO (2013-08-09). "ISO/IEC 19798:2007". Retrieved 2013-10-18.
  12. ^ ISO (2013-08-09). "ISO/IEC 24711:2007". Retrieved 2013-10-18.
  13. ^ ISO (2014-07-01). "ISO/IEC 24734:2014". Retrieved 2017-08-26.
  14. ^ ISO (2012-06-07). "ISO/IEC 24735:2012". Retrieved 2013-10-31.
  15. ^ ISO (2012-08-14). "ISO/IEC TS 24790:2012". Retrieved 2013-10-31.
  16. ^ ISO (2012-07-30). "ISO/IEC TS 29112:2012". Retrieved 2013-10-31.
  17. ^ ISO (2012-07-13). "ISO/IEC TR 29186:2012". Retrieved 2013-10-31.
  18. ^ ISO (2013-03-21). "ISO/IEC 24700:2005". Retrieved 2013-10-31.
  19. ^ ISO (2012-02-14). "ISO/IEC 28360:2012". Retrieved 2013-10-31.
  20. ^ ISO/IEC (2012-02-15). "ISO/IEC 28360" (2 ed.): 1. {{cite journal}}: Cite journal requires |journal= (help)
edit