In the Linux kernel, it was first implemented by Juan José Ciarlante in 1995. On Solaris this was called logical network interface and was first available in Solaris 2.5 in 1995. It has also been possible in Microsoft Windows NT since (at least) Windows NT 3.51, released in 1995.
IP aliasing can be used to provide multiple network addresses on a single physical interface. This demonstrates using IP version 4 addresses only. One reason for using this could be to make a computer look as though it is multiple computers, so for example you could have one server that is acting as both a gateway (router) and a DHCP server and DNS using 3 different IP addresses, perhaps with a future plan to use a hardware router and to move the functionality to separate DNS and DHCP servers. Or indeed the opposite you could decide to replace the 3 different hardware devices with a single server to reduce the administration overhead. In this case you can have 3 different addresses which are all on the same computer without having to install lots of physical network interfaces. Another reason is that you want to have the computer on two different logical network subnets whilst using a single physical interface.
- Ciarlante, Juan Jose (1995-11-30). "ip alias ..." Linux-Net (Mailing list). Retrieved 2017-08-01.
- "SunOS Reference Manual" (PDF). Sun Microsystems. Retrieved 2017-08-01.
- "Adding More than Five IP Addresses to NIC in Windows NT (MSKB 149426)". Microsoft Knowledge Base. October 31, 2006. Retrieved 2010-07-26.
|This computer networking article is a stub. You can help Wikipedia by expanding it.|