FMA IAe 33 Pulqui II
The FMA IAe 33 Pulqui II (in the indigenous language Mapuche, Pulqúi: Arrow) was a jet fighter aircraft designed by Kurt Tank in the late 1940s in Argentina, under the Perón government, and built by the Fábrica Militar de Aviones (FMA). Embodying many of the design elements of the wartime Focke-Wulf Ta 183, an unrealized fighter project, the FMA envisioned the IAe 33 Pulqui II as a successor to the postwar Gloster Meteor F4 in service with the Fuerza Aérea Argentina. The Pulqui II's development was comparatively problematic and lengthy, with two of the four prototypes being lost in fatal crashes. Despite one of the prototypes being successfully tested in combat during the Revolución Libertadora, the political, economic and technical challenges faced by the project meant that the IAe 33 was unable to reach its full potential, and the Argentine government ultimately chose to purchase F-86 Sabres from the United States in lieu of continuing development of the indigenous fighter to production status.
|IAe 33 Pulqui II|
|Pulqui II (No. 02) c. 1950|
|Manufacturer||Fábrica Militar de Aviones (FMA)|
|First flight||27 June 1950|
|Primary user||Fuerza Aérea Argentina|
|Number built||5 (1-static test, 4 flying prototypes)|
|Developed from||Focke-Wulf Ta 183|
In the late 1940s, Argentina benefited from the recruitment of prominent German aerospace scientists and engineers, fleeing Europe following the defeat of the Nazis and seeking sanctuary in Latin America. The first group of these refugees had also included French designer Émile Dewoitine, punished as a collaborator in his homeland, who headed the IAe 27 Pulqui I experimental fighter program with Argentine engineers Juan Ignacio San Martín, Enrique Cardeilhac and Norberto L. Morchio. The Pulqui I was the first jet aircraft designed and built in Latin America. In 1947, flight tests revealed a mediocre performance resulting in the cancellation of the IAe 27 program. The Aerotechnical Institute (Spanish: Instituto Aerotécnico), under the leadership of Morchio, persevered with its efforts to build a successful indigenous jet fighter and, at first, attempted to modify the earlier aircraft. When it became apparent that the Pulqui I had little potential for further development, the Aerotechnical Institute initiated a new design utilizing the more powerful (20.31 kN (4,570 lbf)) Rolls-Royce Nene II turbojet engine. In early 1948, the Institute completed a scale model of what it called the IAe-27a Pulqui II. This design featured trapezoidal wings, swept back at an angle of 33°, and used a NACA 16009 laminar flow airfoil section. A revised model was built later that year with the wings relocated to a shoulder-mounted position and the tailplane changed to a T-tail configuration.
Like Dewoitine, German designer Kurt Tank, the former technical director of the Focke-Wulf Flugzeugbau AG, had been similarly hired in 1947 to work on a jet fighter project for Argentina. Tank, along with 62 of his compatriots at Focke-Wulf, had emigrated to Latin America to restart his career in aerospace ventures.[N 1] Surreptitiously entering the country with a passport identifying him as Pedro Matthies, he found a warm welcome and did not maintain the subterfuge of a secret identity. Along with his former employees, he was instrumental in the evolution of the Instituto Aerotécnico into Argentina's military aircraft factory, the Fábrica Militar de Aviones at Córdoba. Tank was both an engineer as well as a test pilot, who had designed the Fw 190 fighter, but his design team had also been responsible for the Focke-Wulf Ta 183, an unbuilt project that had been declared the winner of the 1945 Emergency Fighter Competition. The diminutive, swept-wing, jet-powered Ta 183, designed by Focke-Wulf engineer/designer Hans Multhopp, had only reached the stage of wind tunnel studies before the end of hostilities.[N 2]
Design and developmentEdit
After his appointment as project director for a new indigenous fighter program, Tank adapted the basic Ta 183 airframe for the Nene II engine, resulting in a new design that bore only a passing resemblance to its forebear. The Nene was larger, heavier and more powerful than the Heinkel HeS 011 turbojet that had been planned for use in the Ta 183,[N 3] and therefore required a new, redesigned fuselage with a larger cross-section primarily due to the Nene's centrifugal compressor rather than the HeS 011's axial compressor design.
Due to the similarity of the IAe-27a and Tank's redesign of the Ta 183, Juan Ignacio San Martín, the director of the Institute merged the two parallel projects as the IAe 33 Pulqui II. The fuselage of Tank's design was further adapted to use the IAe-27a's undercarriage. The shoulder-mounted, negative-incidence wings were swept back 40°, an even greater sweep angle than that of the Ta 183, and given a small amount of anhedral. Comparable to the Ta 183's engine placement, the Nene engine was situated aft of the cockpit, near the center of gravity with engine maintenance and service facilitated through the removal of the tail section. The airframe featured a graceful, 50° swept-back T-shaped empennage and a pressurized[N 4] cockpit topped by a clear bubble-type canopy, faired into the dorsal fuselage. Armor was provided around the cockpit and a bulletproof windscreen was incorporated. Fuel capacity was initially 1,250 l (275 Imp. gal.) internally and 800 l (176 Imp. gal.) in the wings. Armament was planned to include four 20 mm cannon, a pair mounted in a staggered, near-ventral position along each side of the fuselage slightly set back from the jet intake.
Testing and evaluationEdit
To prove the soundness of the IAe 33 design, two gliders built under contract by another expatriate, Reimar Horten, were constructed and used for aerodynamics testing in 1948–1949, including flights by Tank himself. These tests revealed significant problems with lateral stability, resulting in modifications to the tail to address this problem before construction began on two prototype airframes. Due to the lack of modern machinery, the all-metal fabrication relied heavily on handcrafting, and fabricating the prototypes was a labor-intensive procedure. President Perón envisioned that a benefit of setting up an aviation factory in Argentina would be to introduce production standards comparable to world-class manufacturing facilities. However, Tank realized that production tools and jigs were not feasible at this stage and relied instead on essentially hand-built examples. The first airframe (No. 01) reserved for static testing, was subsequently destroyed during the tests.
The first of the "flying" IAe 33 prototypes, (No. 02) built in 1950, [N 5]completed its maiden flight on 27 June of that year, with Captain Edmundo Weiss at the controls. On the second flight, ex-Focke-Wulf test pilot Otto Behrens encountered severe lateral stability problems at speeds over 700 km/h (435 mph) and returned to the airfield as a precaution. Landing at very high speed, the aircraft bounced with sufficient force to cause the right main undercarriage strut to fail. During repairs to the aircraft, in order to rectify the "tricky" landing characteristics, the front undercarriage strut was increased in length, which served to alter the angle of incidence of the aircraft, while the shock absorbers were adjusted to have a greater "throw". Although never considered docile, the modifications improved the takeoff, landing and low-speed characteristics of the IAe 33. More serious aerodynamic problems persisted, stemming from tip stall— in which the wingtip stalled before the wingroot resulting in an unpredictable "rolling moment"— leading to a change in the wing leading edge near the wingroot, while the rudder was modified in an attempt to resolve the interminable lateral instability issues. In addition, the canopy was reinforced with two external frames and a small fairing was installed above the engine exhaust.
Tank, himself a capable development test pilot, took over the test program to investigate the aircraft's stalling characteristics, although the requisite airframe changes took several months to complete, with the Pulqui II N. 02(m) so modified not able to undertake its third proving flight until 23 October. During the ensuing high-altitude test, on two successive occasions, the IAe 33 stalled inadvertently, although Tank had sufficient height at 9,000 m for recovery. Adding ballast to the nose of the aircraft cured the problem. On 8 February 1951, Tank publicly demonstrated the IAe 33 before Perón at the Aeroparque Jorge Newbery in Buenos Aires. The audience also included government officials, legislators and the foreign diplomatic corps in the military attaches of the embassies, along with a large crowd of spectators. Both the IAe 27 Pulqui I and IAe 33 Pulqui II flew during the demonstration.
With the successful completion of the proving test flights, the Argentine Air Force requested a pre-production order of 12 IAe 33 aircraft. In 1951, the air force established a team of service pilots to test fly the new aircraft in a series of acceptance flights. The first flight by Commander Soto on 31 May 1951 revealed severe vibration at about 1,000 kilometres per hour (621 mph). Tank declared the sole prototype unserviceable pending an investigation into the problem, although this stricture appears to have been overlooked and the prototype continued to fly. On the eve of its 28th flight, Captain Vedania Mannuwal, assigned to the test program, was advised not to stress the aircraft, as the source of the vibrations experienced during the previous flight in the morning had not been discovered. Determined to "better" his team leader's recent performance, however, he ignored the precautions and began practising aerobatic maneuvers near Córdoba during his afternoon flight. Consequently, in a high g-force turn, a structural failure occurred with the wing separating from the fuselage. After struggling with the Martin-Baker Mk I ejection seat, Mannuwal ejected at low altitude while the aircraft was inverted. His parachute did not fully deploy, however, and he was killed. The defect in the Pulqui II was traced to faulty workmanship related to welding the joint pin that fastened the wing to the fuselage. Welding had been a dichotomy in the manufacturing process necessitated by the paucity of modern forging and pressing equipment in Argentina.
Construction of a third prototype (No. 03) began immediately after this loss. The design team initiated a number of changes to rectify design flaws found in the first "flying" prototype, including an incorporating a larger rudder to improve lateral stability, increasing the size of the exhaust fairing and adding a unique air brake that rotated out from the sides of the fuselage near the tail, along with further reinforcement of the canopy. More fuel was also carried internally to extend the range from 2,030 to 3,090 kilometres (1,260 to 1,920 mi). The new IAe 33 prototype completed its first flight on 23 September 1952, piloted by Capt. Jorge Doyle. Flight testing resumed although the aircraft was prepared for a demonstration before President Perón on 11 October 1952. Behrens, who was slated for the flight, had reservations about the flight characteristics of the Pulqui II at the extremes of its flight envelope, characterizing them as "... the worst I've ever experienced as a test pilot." Two days prior to the exhibition, while practising his display routine, Behrens stalled the Pulqui II at low level and was killed in the resulting crash, which destroyed the prototype.
In 1953, Tank constructed a fourth prototype (No. 04) and, in an attempt to resolve the design's deep stall problems at high angles of attack, added stall fences on each wing and four strakes on the rear fuselage. Other refinements included a pressurized cockpit, additional fuel capacity and it was also the first prototype to be fitted with the definitive four 20 mm Hispano Mark V cannon armament. Lt. Jorge Doyle piloted the fourth IAe 33 on its maiden flight on 20 August 1953 and, along with Lt. Gonzalez and Lt. Balado, began armament testing in 1954.
While an "all-weather" IAe 33 version adding a radar was considered, the Argentine Air Force made tentative plans for the acquisition of 100 Pulqui II aircraft, with the production version to be a dedicated interceptor, featuring an uprated Nene engine fitted with an afterburner and giving it an anticipated maximum speed of Mach 0.98. A number of foreign buyers had equally expressed interest in the IAe 33, including the Netherlands in 1951 and Egypt in 1953, but the lack of a clear commitment to a production series hampered prospects for export sales, with both nations eventually settling on other readily available fighter aircraft.[N 6]
The IAe 33 Pulqui II project was inexorably linked to the machinations and fortunes of the Peronist regime. Although the Fábrica Militar de Aviones was charged with bringing aviation projects to completion, constant political interference contributed to the delays and disarray in aviation programs. Severe economic problems led in 1951 to the Perón government using the Fábrica Militar de Aviones to build cars, trucks, and motorcycles, including the IAME Rastrojero. Moreover, Tank's team was not primarily focused on the IAe 33, completing the design of the FMA IA 35 Huanquero multi-purpose aircraft (transport, trainer and reconnaissance roles), that eventually entered production at the Dirección Nacional de Fabricación e Investigación Aeronáutica (DINFIA) (Spanish: "National Directorate of Aeronautical Manufacturing and Research"). The most devastating political decision was to divert the entire manufacturing program "seemingly overnight" to automotive products and agricultural equipment, essentially closing the aviation divisions. The competing DINFIA projects such as automotive manufacture served to further drain resources in time, money and personnel from the Pulqui II project.
While Argentina's finances were extremely strained at this juncture following the economic crisis in 1953, the most serious setback to the project came in January 1955 when Tank's contract expired. He reputedly requested almost twice as much money to continue but President Perón instead canceled his contract outright. Despite four years of development and trials, the IAe 33 project was still encountering teething problems and its status remained unclear although no final decision had been made to abandon a project that had reached iconic stature in the Perónist era.
In September 1955, the sole remaining Pulqui II prototype was pressed into action in the Revolución Libertadora, a coup d'état led by General Eduardo Lonardi against Perón. The exact details of its participation are unknown, but when rebel forces commanded by Lonardi captured Córdoba as their first conquest, together with the Meteor F 4s fighter-bombers stationed at the Córdoba Escuela De Aviación - SACE (Military Aviation School), the IAe 33 was enlisted in the struggle. After flying combat missions against Perónist stalwarts, it later appeared in a flyover during the victory parade at Córdoba celebrating the triumph of the coup over loyalist forces.
When the military junta came to power, the IAe 33 project was thrown into disarray. The new government released many of the leading air force staff; similarly, most of Tank's team was forced to leave Argentina with Tank himself going to India, where he worked for Hindustan Aeronautics Limited, and later developed the HF-24 Marut supersonic fighter.
In 1956, the air force, in an effort to gain political support, planned a record flight from Córdoba to Buenos Aires to demonstrate the combat potential of the IAe 33. The Pulqui II would fly 800 km, strafe an air force practice range in the Buenos Aires area, and then return to Córdoba using only internal fuel. The only oxygen equipment available for such a long flight was scrounged from a FMA Meteor under repairs. Lt. Balado successfully completed the flight (including the strafing demonstration) at an average cruise speed of around 900 km/h, but the oxygen system failed on the return leg. The semi-conscious pilot managed to perform an emergency landing at high speed, but the heavy landing and resulting stress broke the landing gear, with the Pulqui II overrunning the end of the runway, the aircraft being damaged beyond repair.
Shortly after Balado's record flight, the Argentine Air Force reviewed its decision to acquire 100 Pulqui IIs for its fighter force. Based on the spares and wing and fuselage components at hand, the Fábrica Militar de Aviones asserted that ten aircraft could be constructed relatively quickly, however, the remainder of the order would take five years to complete. Meanwhile, plans for an alternative replacement of the hundred aging Meteor F4s obtained in the late 1940s that constituted the backbone of the Air Force continued, initially centered on the acquisition of 36 Canadair CL-13B Mk 6 Sabres, an idea which was dropped in 1956 because the Central Bank was unable to provide the necessary foreign exchange.
With the Canadair Sabre no longer a viable option, the Fábrica Militar de Aviones seriously considered having the Pulqui II enter series production. A new prototype was ordered in 1957, despite the United States having offered 100 combat-proven F-86 Sabre fighters with Orenda engines that were available immediately. The fifth IAe 33 Pulqui II (No. 05) prototype, designated Pulqui IIe, was constructed in 1959 (visually identical to the fourth prototype although retaining the original frameless, clear canopy) and entered flight testing after its first flight on 18 September of that year, with Lt. Roberto Starc at the controls. The continual evolution of the Pulqui II had resulted in the design team solving its inherent instability at high angles of attack, as well as increasing fuel capacity through the use of a wet wing, to provide sufficient range. However the fighter was now not only considered obsolete, but also politically tainted due to its association with Perón. Consequently, the Argentine government decided to cancel the IAe 33 project at the zenith of its development, instead acquiring second-hand F-86F-40 Sabres from the United States at a "bargain-basement price" under the Mutual Defense Assistance Act. Finally, in September 1960, Argentina received only 28 aircraft, in poor condition and without the promised Orenda engine.
In 1960, after completing only twelve test fights in a new role as a transonic research platform, the last IAe 33 prototype was retired and placed in storage, bringing the Pulqui II project to a culmination. The remaining factory tooling and incomplete airframes were summarily destroyed soon after.
Despite not having achieved production status, the IAe 33 Pulqui II is still considered a significant aviation achievement because it was the first swept-wing jet fighter entirely developed and built in Latin America and, along with the Pulqui I, allowed Argentina to lay claim to becoming only the eighth nation in the world to develop such technology.[N 7] . One tangible long-term benefit that can be traced to the Pulqui II project was the creation of Argentina's fledgling aviation industry, now restructured as the Fábrica Argentina de Aviones.
After decades in an outdoor display at the Aeroparque, Museo Nacional de Aeronautica in Buenos Aires, the sole surviving example of the IAe 33 Pulqui II project is preserved indoors at the Argentine Air Force's Museo Nacional de Aeronáutica de Argentina at Air Base Morón and displayed, still in its original colors and markings, alongside the IAe 27 Pulqui I, both symbols of "lost dreams".
Specifications (3rd and 4th prototypes)Edit
Data from "Pioneers & Prototypes: Pulqui, Pulqui II and IA-37/48."
- Crew: one
- Length: 11.68 m (38 ft 4 in)
- Wingspan: 10.6 m (34 ft 9 in)
- Height: 3.5 m (11 ft 6 in)
- Wing area: 25.1 m2 (270 sq ft)
- Empty weight: 3,736 kg (8,236 lb)
- Gross weight: 6,875 kg (15,157 lb)
- Powerplant: 1 × Rolls-Royce Nene II turbojet, 22.69 kN (5,100 lbf) thrust
- Maximum speed: 1,080 km/h (671 mph; 583 kn)
- Cruise speed: 954 km/h (593 mph; 515 kn)
- Range: 3,090 km (1,920 mi; 1,668 nmi)
- Endurance: 2 hours, 50 minutes
- Service ceiling: 15,000 m (49,000 ft)
- Rate of climb: 25.5 m/s (5,020 ft/min)
Aircraft of comparable role, configuration and era
- Boulton Paul P.111/P.120
- Dassault Ouragan/Dassault Mystère I
- Handley Page HP.88
- Hawker P.1052/1081
- Lavochkin La-15
- Mikoyan-Gurevich MiG-15
- North American F-86 Sabre
- Saab 29 Tunnan
- SNCAC NC 1080
- Sud-Est Grognard
- Supermarine 510/528/535
- In 1947, Tank left West Germany via Denmark. After arriving in Argentina, he sent for his wartime technical staff that he had retained in Bremen as a complete group. By 1952, 62 technicians along with four pilots had joined Tank in Argentina.
- The only prominent engineer missing from the design team Tank amassed in Argentina was Hans Multhopp, the head of the Ta 183 program, who had emigrated to the United Kingdom to work at the Royal Aircraft Establishment (RAE) Farnborough from 1945 to 1949.
- The Jumo 004B turbojet would have been used in prototype Ta 183s, pending availability of the HeS 011.
- Although the provision was always specified for the production series, a pressurized cockpit was not introduced until prototype No. 04.
- Due to the recurrent modifications and difficulties encountered in flight testing, Tank reverted to employing the standard prototype testing regime before committing to further prototypes or production aircraft.
- The Netherlands acquired the Republic F-84F Thunderstreak and F-84G Thunderjet from the United States under the MDAA, while Egypt chose the Soviet Mikoyan MiG-15.
- After Germany (Heinkel He 178), the United Kingdom (Gloster E.28/39), the United States (Bell P-59 Airacomet), Japan (Nakajima Kikka), the Soviet Union (Mikoyan-Gurevich MiG-9), France (Sud-Ouest Triton) and Sweden (Saab 21R).
- Paul 1960, p. 145.
- Crowder-Taraborrelli, Tomas F. "Evita in Wonderland: Pulqui and the Workshop of Underdevelopment." CineAction, 22 June 2009. Retrieved: 26 April 2010.
- Green and Pollinger 1955, p. 105.
- Meyer 2007, p. 98.
- Green 1979, p. 304.
- Swan, Matt. "Tamiya (ex AM-Tech) 1/48 Ta.183A "Huckebein"." swannysmodels.com. Retrieved: 10 May 2010.
- Bennighof, Mike. "Jets for Argentina." avalanchepress.com, June 2007. Retrieved: 27 April 2010.
- "FMA I.Ae.27 Pulqui 1." Archived 2010-02-26 at the Wayback Machine machtres.com. Retrieved: 27 April 2010.
- Waligorski, Martin. "Pulqui: Argentina's Jet Adventure." Camouflage & Markings: IPMS Stockholm, 22 September 2006. Retrieved: 27 April 2010.
- Rivas 2008, pp. 166–167.
- Wilkinson 2010, p. 24.
- Wilkinson 2010, p. 32.
- Newton 1992, p. 376.
- "Argentina: Old Hands, New Directions." Time magazine via time.com, 23 October 1950.
- Schick and Meyer 1997, pp. 146–147.
- Johnson, Dan. "FW TA 183 Design II." luft46.com. Retrieved: 26 April 2010.
- Myhra 1999, p. 4.
- Myhra 1999, p. 11.
- Schick and Meyer 1997, p. 146.
- Rivas 2008, p. 167.
- Green and Cross 1955, p. 116.
- Calcaterra, Pablo. "Pulqui II - A broken dream." Archived 2011-07-07 at the Wayback Machine arcair.com, 2010. Retrieved: 24 April 2010.
- Donald 1997, p. 384.
- Bridgman 1954, p. 141.
- Rivas 2008, pp. 167–168.
- Rathkolb 2004, p. 220.
- Rivas 2008, p. 168.
- Moyano, Miguel Angel. "El Proycto 'Pulqui': Propaganda peronista de la epoca." (Project 'Pulqui': Peronist propaganda of the time) (in Spanish) Archived 2010-11-19 at the Wayback Machine lucheyvuelve.com. Retrieved: 26 April 2010.
- Rivas 2008, pp. 168–169.
- Rivas 2008, p. 169.
- Arreguez, César Angel. "aviones fabricados y proyectados desde 1943 hasta la revolución libertadora" (Airplanes produced and projected from 1943 to the liberating revolution) (in Spanish). Archived 2010-09-12 at the Wayback Machine mincyt.cba.gov.ar. Retrieved: 26 April 2010.
- Honig 1993, p. 44.
- Ginat 1994, p. 215.
- Green and Fricker 1958, p. 13.
- Artopoulos 2012, p. 45.
- Crassweller 1987, p. 282.
- Cooper, Tom. "Argentina, 1955–1965." Central and Latin America Database, 1 September 2003. Retrieved: 26 April 2010.
- Rivas 2008, pp. 170–171.
- Paul 1960, p. 179.
- Green and Swanborough 1994, p. 213.
- "IAe.33 Pulqui II." Archived 2010-10-06 at the Wayback Machine machtres.com. Retrieved: 27 April 2010.
- Myhra 1999, pp. 52, 58, 59.
- "Jet Engines." Archived 2010-05-28 at the Wayback Machine U.S. Centennial of Flight Commission, 2003. Retrieved: 29 April 2010.
- "No Airscrew Necessary ..." Flight via flightglobal.com, 27 October 1949. Retrieved: 29 April 2010.
- Green 1980, p. 132.
- Famous Aircraft of the World, No.76: Japanese Army Experimental Fighters (1). Tokyo: Bunrin-Do, August 1976.
- Albrecht 1993, p. 44.
- Taylor 1976, p. 231.
- Billing 1983, p. 20.
- Maligno, Emilio. "Aircraft Argentina." Archived 2010-01-07 at the Wayback Machine lockheedmartin.com, 2010. Retrieved: 27 April 2010.
- Hunt 1970, p. 211.
- Rivas 2008, p. 171.
- Albrecht, Ulrich. The Soviet Armaments Industry. Abingdon, Oxford, UK: Routledge, 1993. ISBN 978-3-7186-5313-3.
- Artopoulos, Alejandro. "Tecnología e Innovación en Países Emergentes: La Aventura del Pulqui II". Carapachay, Buenos Aires: Lenguaje Claro Editora, 2012. ISBN 978-987-23627-6-8.
- Billing, Peter. "SAAB's Jet Debutant." Air Enthusiast Twenty-three, December 1983–March 1984, pp. 20–30. ISSN 0143-5450.
- Bridgman, Leonard, ed. Jane's All The World's Aircraft 1953–54. London: Jane's, 1954. ASIN B000S9RD12.
- Crassweller, Robert. Perón and the Enigmas of Argentina. New York: W.W. Norton and Company Inc., 1987. ISBN 0-393-02381-8.
- Donald, David, ed. The Complete Encyclopedia of World Aircraft. London: Orbis, 1997. ISBN 0-7607-0592-5.
- Ginat, Rami. The Soviet Union and Egypt, 1945–1955. New York: Routledge, 1994. ISBN 0-7146-3486-7.
- Green, William, ed. "FMA I.AE.33 Pulqui II, Argentina". Air International, Volume 16, No. 6, June 1979, p. 304. ISSN 0306-5634.
- Green, William, ed. "Airacomet... a jet pioneer by Bell." Air International, Volume 18, No. 3, March 1980, pp. 132–139. ISSN 0306-5634.
- Green, William and Gerald Pollinger. The Aircraft of the World. London: Macdonald, 1955. ASIN B000SDHRI2.
- Green, William and John Fricker. The Air Forces of the World: Their History, Development and Present Strength. New York: Hanover House, 1958. ASIN B000XHOFYC.
- Green, William and Gordon Swanborough. The Complete Book of Fighters. London: Salamander, 1994. ISBN 0-8317-3939-8.
- Green, William and Roy Cross. The Jet Aircraft of the World. London: Macdonald, 1955. ASIN B000KPNQRO.
- Honig, Jan Willem. Defense Policy in the North Atlantic Alliance: The Case of the Netherlands. Westport, CT: Praeger Publishers, 1993. ISBN 0-275-94369-0.
- Hunt, Leslie. Veteran and Vintage Aircraft. New York: Taplinger Publishing Co. Inc., 1970 (third edition). ISBN 0-8008-7948-1.
- Meyer, Ingolf. Luftwaffe Advanced Aircraft Projects to 1945: Volume 1: Fighters & Ground-Attack Aircraft, Arado to Junkers (Luftwaffe Advanced Projects). Hinckley, UK: Midland, 2007. ISBN 978-1-85780-240-5.
- Myhra, David. Focke-Wulf Ta 183 (X Planes of the Third Reich). Atglen, PA: Schiffer Publishing, 1999. ISBN 978-0-7643-0907-6.
- Newton, Ronald C. The "Nazi Menace" in Argentina, 1931–1947. Palo Alto, CA : Stanford University Press, 1992. ISBN 978-0-8047-1929-2.
- Paul, Christopher G.J., ed. "Aircraft Development in Argentina". Air Pictorial, Volume 22, No. 5, May 1960, pp. 145–148, 179.
- Rathkolb, Oliver. Revisiting the National Socialist Legacy: Coming to Terms with Forced Labor, Expropriation, Compensation, and Restitution. Piscataway, NJ: Transaction Publishers (Rutgers - The State University of New Jersey), 2004. ISBN 978-0-7658-0596-6.
- Rivas, Santiago. "Pioneers & Prototypes: Pulqui, Pulqui II and IA-37/48." International Air Power Review, Issue 25, 2008, pp. 162–173. Westport, CT: AIRtime. ISSN 1473-9917.
- Schick, Walter and Ingolf Meyer. Luftwaffe Secret Projects: Fighters, 1939–1945 v. 1. Hinckley, UK: Midland, 1997. ISBN 978-1-85780-052-4.
- Taylor, John W.R. Jane's Pocket Book of Research and Experimental Aircraft, London: Macdonald and Jane's Publishers Ltd, 1976. ISBN 0-356-08409-4.
- Wilkinson, Stephen. "Designer-Pilot: Kurt Tank." Aviation History, Volume 20, no. 4, March 2010. ISSN 1076-8858.
- Burzaco, Ricardo. Las Alas de Perón (Wings of Perón) (in Spanish). Buenos Aires: Artes Gráficas Morello, 1995. ISBN 987-95666-0-2.
- Cespedes, Marcelo, producer and Fernández Mouján, Alejandro, director. Pulqui, Un instante en la Patria de la Felicidad (Alternative title: Pulqui, A Moment in the Native Land of Happiness) (video documentary) (in Spanish). Buenos Aires: Cine Ojo, 2007.
- Benedetto, Fernando (2012). Núñez Padin, Jorge Felix (ed.). I.Ae-27 Pulqui I & I.A.-33 Pulqui II. Serie Fuerza Aérea (in Spanish). 22. Bahía Blanca, Argentina: Fuerzas Aeronavales. ISBN 978-987-1682-18-8.
|Wikimedia Commons has media related to I.Ae. 33 Pulqui II.|
- I.Ae.33 Pulqui II
- IAe 33 Pulqui II Fighter, Fábrica Militar de Aviación
- IPMSStockholm.org (en) article about Pulqui I & II, with illustrations. (retrieved 2019-02-24)