The Heritage 35 is a Canadian sailboat that was designed by Americans McCurdy & Rhodes as a cruiser and first built in 1974.[1][2][3][4]

Heritage 35
Development
DesignerMcCurdy & Rhodes
LocationCanada
Year1974
No. built14
Builder(s)Heritage Yacht Builders
RoleCruiser
NameHeritage 35
Boat
Displacement13,700 lb (6,214 kg)
Draft5.50 ft (1.68 m)
Hull
Typemonohull
Constructionfibreglass
LOA36.08 ft (11.00 m)
LWL26.62 ft (8.11 m)
Beam10.17 ft (3.10 m)
Engine typeWesterbeke MG1500 diesel engine
Hull appendages
Keel/board typefin keel
Ballast6,250 lb (2,835 kg)
Rudder(s)skeg-mounted/internally-mounted spade-type/transom-mounted rudder
Rig
Rig typeBermuda rig
I foretriangle height42.80 ft (13.05 m)
J foretriangle base14.30 ft (4.36 m)
P mainsail luff37.30 ft (11.37 m)
E mainsail foot13.40 ft (4.08 m)
Sails
Sailplanmasthead sloop
Mainsail area249.91 sq ft (23.217 m2)
Jib/genoa area306.02 sq ft (28.430 m2)
Total sail area555.93 sq ft (51.648 m2)

Production

edit

The design was built by Heritage Yacht Builders in Oakdale, Ontario, Canada. The company built 14 boats between 1974 and 1977. The moulds were then purchased by Grampian Marine of Oakville, Ontario, but that company went out of business later in 1977, before producing any boats.[1][2]

The Heritage 35 design was later developed into the Intrepid 35, using the same tooling and moulds.[1][2][5][6]

Design

edit

The Heritage 35 is a recreational keelboat, built predominantly of fibreglass, with wood trim. It has a masthead sloop rig; a raked stem; a raised counter, reverse transom; a skeg-mounted rudder controlled by a tiller and a fixed fin keel. It displaces 13,700 lb (6,214 kg) and carries 6,250 lb (2,835 kg) of ballast.[1][2]

The boat has a draft of 5.50 ft (1.68 m) with the standard keel.[1][2]

The boat is fitted with a Westerbeke MG1500 diesel engine for docking and manoeuvring. The fuel tank holds 40 U.S. gallons (150 L; 33 imp gal) and the fresh water tank has a capacity of 125 U.S. gallons (470 L; 104 imp gal).[1][2]

The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, two straight settee berths in the main cabin and an aft berth on the port side. The galley is located on the starboard side just forward of the companionway ladder. The galley is L-shaped and is equipped with a stove, an ice box and a sink. A navigation station is opposite the galley, on the port side. The head is located just aft of the bow cabin on the port side.[1][2]

The design has a hull speed of 6.91 kn (12.80 km/h).[2]

See also

edit

References

edit
  1. ^ a b c d e f g McArthur, Bruce (2022). "Heritage 35 sailboat". sailboatdata.com. Archived from the original on 23 January 2022. Retrieved 23 January 2022.
  2. ^ a b c d e f g h Sea Time Tech, LLC (2022). "Heritage 35". sailboat.guide. Archived from the original on 23 January 2022. Retrieved 23 January 2022.
  3. ^ McArthur, Bruce (2022). "McCurdy & Rhodes". sailboatdata.com. Archived from the original on 18 November 2021. Retrieved 23 January 2022.
  4. ^ Sea Time Tech, LLC (2022). "McCurdy & Rhodes". sailboat.guide. Archived from the original on 14 January 2022. Retrieved 23 January 2022.
  5. ^ McArthur, Bruce (2022). "Intrepid 35 sailboat". sailboatdata.com. Archived from the original on 26 January 2022. Retrieved 26 January 2022.
  6. ^ Sea Time Tech, LLC (2022). "Intrepid 35". sailboat.guide. Archived from the original on 26 January 2022. Retrieved 26 January 2022.
edit