A flyswatter (or fly swatter) usually consists of a small rectangular or round sheet of some 10 cm (4 in) across) of lightweight, flexible, vented material (usually thin metallic, rubber, or plastic mesh), attached to a lightweight wire or plastic handle about 30 to 60 cm (1 to 2 ft) long. The venting or perforations minimize the disruption of air currents, which can be detected by the fly and allow it to escape, and also reduce air resistance, making it easier to hit a fast-moving target such as a fly.
A flyswatter is ideally lightweight and stiff, allowing quick acceleration to overcome the fast reaction time of the fly, while also minimizing damage caused by hitting other objects. The flyswatter usually works by mechanically crushing the fly against a hard surface, after the user has waited for the fly to land somewhere. However, some skilled users can injure or stun an airborne insect in mid-flight by whipping the swatter through the air at an extreme speed.
The abeyance of insects by use of short horsetail staffs and fans is ancient. The earliest flyswatters were in fact nothing more than some sort of striking surface attached to the end of a long stick. An early patent on a commercial flyswatter was issued in 1900 to Robert R. Montgomery who called it a fly-killer.  Montgomery sold his patent to John L. Bennett, a wealthy inventor and an industrialist who made further improvements on the design.
However, the origin of the name "flyswatter" does not come from its inventors. In the summer of 1905, Kansas was plagued by an overabundance of flies, which as well as causing annoyance, aided in the spread of communicable disease. Dr. Samuel Crumbine, a member of the Kansas board of health, wanted to raise public awareness of the threat of flies. He was inspired by a chant at a local Topeka softball game: "swat the ball". In a health bulletin published soon afterwards, he exhorted Kansans to "swat the fly". In response, a schoolteacher named Frank H. Rose created the "fly bat", a device consisting of a yardstick attached to a piece of screen. Crumbine had named the device now commonly known as the flyswatter.
The fly gun (or flygun), a derivative of the flyswatter, uses a spring-loaded plastic projectile to mechanically "swat" flies. Mounted on the projectile is a perforated circular disk which, according to advertising copy, "won't splat the fly". Several similar products are sold, mostly as toys or novelty items, although their supporters maintain that they work as well as traditional fly swatters.
Another gun-like design has a pair of mesh sheets spring loaded to 'clap' together when a trigger is pulled, squashing the fly between them. In contrast to the traditional flyswatter, such a design can only be used on an insect in mid-air.
Another projectile fly killer is the Bug-a-Salt, a miniaturized shotgun which shoots a spray of dry table salt using a spring-compressed air blast similar to a BB rifle. It has an accurate range of about 1 m (3.3 ft), and the killed bugs remain whole for easy cleanup. The pneumatic salt-shot approach is claimed to be effective because the high speed, small-sized salt grains are apparently undetected by the targeted fly until it is too late to dodge them.
A fly bottle or glass flytrap is a passive trap for flying insects. In the Far East, it is a large bottle of clear glass with a black metal top in which there is a hole. An odorous bait is placed in the bottom of the bottle in the form of pieces of meat. Flies enter the bottle in search of food and are then unable to escape because their phototaxis behavior leads them anywhere in the bottle except to the darker top where the entry hole is.
A European fly bottle is more conical, with small feet that raise it 1.25 cm (0.5 in), with a trough about an 2.5 cm (1 in) wide and deep that runs inside the bottle all around the central opening at the bottom of the container. In use, the bottle is stood on a plate and some sugar is sprinkled on the plate to attract the flies, which eventually fly up into the bottle, whose trough is filled with beer or vinegar, into which the flies fall and drown. In the past, the trough was also sometimes filled with a dangerous mixture of milk, water, and arsenic or mercury chloride.
Variants of these bottles are the agricultural fly traps used to fight the Mediterranean fruit fly and the olive fly, which have been in use since the 1930s. They are smaller, without feet, and the glass is thicker for rough outdoor usage, often involving suspension in a tree or bush. Modern versions of this device are often made of plastic, and can be purchased in some hardware stores. They can also be improvised from disposable plastic drink bottles.
Disposable fly trapsEdit
Disposable fly traps are small “use and throw away” fly traps. The traps are disposable plastic bags containing some attractant, generally made of flavoring agents that are non-toxic. Water and direct sunlight are used to activate the attractant, which emits a smell to lure the flies. Insects enter the trap and drown in the water inside.
A glue board is a capture device with a strong adhesive. A small card covered in sticky adhesive is situated in an enclosure so that when the flies come into contact with it, they remain stuck and die there. A reusable glue board may be renewed through the use of vegetable oil, and then removing the oil with dishwashing detergent and a water rinse. Alternatively, the card is disposed of and completely replaced periodically.
Flypaper (also known as fly paper, fly sticker, fly strip, fly ribbon, or fly tape) attracts flies to adhesive so that they can be trapped. The exposed adhesive strip makes it more stick-prone than an enclosed glue board. To avoid accidental entanglement with humans, the strips are often hung in relatively inaccessible spaces, such as near ceilings. One type of fly strip is packaged in a small cardboard tube with a pin on the top. It is used by pulling the pin off the top (usually covered with wax), removing the adhesive "fly strip" and using the pin to attach it to a ceiling, with the tube dangling below as a small weight. Flypaper is not reused, but is replaced when it loses effectiveness.
Flypaper is often impregnated with a slightly odorous chemical to attract more flies. The attractiveness of flypaper to other insects (such as mosquitos and biting midges) is sometimes enhanced by shining a small portable electric light on the sticky surface.
A bug vacuum (bug vac or aspirator) is a type of small but powerful portable vacuum cleaner, usually with internal batteries. The motor starts quickly and generates strong suction, trapping the flying insect inside the device. The insect may be captured on an adhesive internal surface, or simply held inside the device until it dehydrates and dies.
Some bug vacuums feature non-lethal designs which keep trapped insects inside, but do not otherwise harm them, allowing their later release. These devices are popular with amateur and professional entomologists, and with persons who wish to avoid the killing of insects.
This design uses a continuously-running electric fan to suck in flying insects (especially mosquitos and gnats, which are weak fliers), which are then trapped by a fine mesh grid or bag. Unable to escape the constant airflow, the insects quickly dehydrate and die. Some variant designs use carbon dioxide, ultraviolet light, or chemical scent to attract insects to the trap. Other designs rely on the natural carbon dioxide or scents emitted by people, pets, or livestock to attract pests, and simply collect flying insects as they wander close enough to be sucked in. In addition, the continuous breeze produced by a common electric fan has been found to discourage mosquitos from landing and biting, even without trapping or killing the insects.
A bug zapper electric grid (fly zapper) kills insects by electrocution from high voltage on adjacent metallic grids. Bug zappers are generally small appliances intended for use in a fixed location, as distinguished from hand held electric flyswatters.
Electric flyswatters (sometimes called mosquito bats, racket zappers, or zap rackets) are hand-held devices that resemble badminton rackets or tennis rackets, which became popular worldwide in the late 1990s. US Patent 5,519,963 was awarded to Taiwanese inventor Tsao-i Shih in 1996 for such a device. The handle contains a battery-powered high-voltage generator. The circuit is composed of an electronic oscillator, a step-up transformer and a voltage multiplier, similar to the circuit in an electroshock weapon or stun gun, but with much lower power.
The grid of the flyswatter is electrically charged to a voltage of between 500 and 2,750 volts (V), activated by pressing and holding a button. When the electrically conductive body of a fly nearly bridges the gap between electrodes, a spark jumps through the fly. A capacitor attached to the electrodes discharges during the spark, and this initial discharge usually stuns or kills the fly. If the button is still pressed, the continuous current will roast and kill the fly. Many flyswatters have a three-layer grid to prevent people from touching both electrodes. The outermost grids or rods are at the same electrical potential, and are open enough to allow an insect to contact the inner charged grid.
Most electric flyswatters conform to electrical safety standards for humans:
- a limit on the charge stored in the capacitor: a discharge of less than 45 microcoulombs (µC) is considered safe, even in the unlikely scenario that the current from a flyswatter would be flowing from one arm to the other arm, partly through the heart. This means that the capacitor of a 1000 V flyswatter should be less than 45 nanofarads (nF). Due to this precaution for humans, the initial shock is usually inadequate to kill flies, but will stun them for long enough that they can be disposed of.
- A limit on the current after the initial discharge: the maximal continuous current of most flyswatters is less than 5 milliamps (mA). This current is safe, even when flowing from one arm to the other arm of a human.
An advantage over conventional flyswatters is that the electrical models do not have to mechanically crush the fly against a hard surface to kill it, avoiding the smeared mess this can create. Also, the electrical grid can be relatively open, reducing air resistance and a rush of air that often deflects smaller insects around conventional swatters. Because of this, electric swatters can also be very effective in killing airborne mosquitos and sandflies.
|Wikimedia Commons has media related to Fly swatters.|
|Look up fly-killing device in Wiktionary, the free dictionary.|
- "JOHN L. BENNETT, BEER CAN PIONEER; Inventor Dies--Also Made a Better Fly Swatter".
- "The Invention of the Fly Swatter - Screening for Health: Insects & Disease Prevention". Retrieved 2016-09-22.
- "STV Clap-A-fly Swat". www.sam-turner.co.uk.
- Reagan, Brad (2012-10-14). "In Latest Bid to Lord Over Flies, One Man Tries Salting Them Away - WSJ.com". Online.wsj.com. Retrieved 2013-02-26.
- Kyokai, Toho Bukkyo (1979). The Eastern Buddhist. Kyoto: Eastern Buddhist Society. p. 36.
- Scott, John William Robertson (1953). The Countryman. J.W. Robertson Scott. p. 260.
- "Glass fly trap, late 19th century". Gathering the Jewels.
- "Aspirators". John W. Hock Company. Retrieved 2015-01-31.
- "Frequently Asked Questions". AMCA: American Mosquito Control Association. American Mosquito Control Association. Retrieved 2014-09-16.
- "How Mosquito Traps Work". MosquitoTraps.biz. Retrieved 2015-01-31.
- "How it Works". Skeeterbag mosquito trap kit. Skeeterbag. Retrieved 2014-09-16.
- Broad, William J. (July 15, 2013). "A Low-Tech Mosquito Deterrent". New York Times. Retrieved 2014-09-16.
- Miller, Elizabeth. "Mosquito Racket zappers shock bugs with a wave of your hand". How to get rid of mosquitoes. MosquitoReviews.com. Retrieved 2015-06-15.
- "Electronic insect-killing swatter". Retrieved 2012-05-28.
- "Indoor Mosquito Bats Explained". Retrieved 2012-05-28.
- Electrical Safety Standard IEC 61010-1
- Electrical Safety Standard IEC 479-1
- "Lightweight Rechargeable Bug Zapper with Detachable Power Cord". Zap Racket. Retrieved 2015-06-15.