File:Artemis I SLS Core Stage Prep for Lift Mate.jpg

Original file ‎(4,421 × 6,631 pixels, file size: 24.65 MB, MIME type: image/jpeg)

This is a file from the Wikimedia Commons. Information from its description page there is shown below.
Commons is a freely licensed media file repository. You can help.

Summary

Description

The fully stacked twin solid rocket boosters for NASA’s Space Launch System (SLS) rocket are seen on top of the mobile launcher inside High Bay 3 of the Vehicle Assembly Building (VAB) at the agency’s Kennedy Space Center in Florida on June 9, 2021. Now that booster stacking is complete inside the VAB, teams with NASA’s Exploration Ground Systems and contractor Jacobs are preparing to integrate the boosters with largest part of the SLS rocket, the massive 212-foot core stage, which arrived at Kennedy in April 2020. The 188,000-pound core stage alone will provide more than 2 million pounds of thrust during launch and ascent, and coupled with the boosters, will provide more than 8.8 million pounds of thrust to send the Artemis I mission to space. The first in an increasingly complex series of missions, Artemis I will test SLS and the Orion spacecraft as an integrated system ahead of crewed flights to the Moon.

Date

Taken on 9 June 2021, 20:18 (according to Exif data)

Source

https://images.nasa.gov/details-KSC-20210609-PH-KLS01_0086

Author

NASA/Kim Shiflett

Kim Shiflett
Description	photographer
Authority file	: Q117448892

Permission
(Reusing this file)

	This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
	Warnings: Use of NASA logos, insignia and emblems is restricted per U.S. law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not necessarily in the public domain. Materials based on Hubble Space Telescope data may be copyrighted if they are not explicitly produced by the STScI.[1] See also {{PD-Hubble}} and {{Cc-Hubble}}. The SOHO (ESA & NASA) joint project implies that all materials created by its probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3] The National Space Science Data Center (NSSDC) site has been known to host copyrighted content. Its photo gallery FAQ states that all of the images in the photo gallery are in the public domain "Unless otherwise noted."

This image or video was catalogued by Kennedy Space Center of the United States National Aeronautics and Space Administration (NASA) under Photo ID: KSC-20210609-PH-KLS01_0086.

This tag does not indicate the copyright status of the attached work. A normal copyright tag is still required. See Commons:Licensing.

Other languages:

العربية ∙ беларуская (тарашкевіца) ∙ български ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ English ∙ español ∙ فارسی ∙ français ∙ galego ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ македонски ∙ മലയാളം ∙ Nederlands ∙ polski ∙ português ∙ русский ∙ sicilianu ∙ slovenščina ∙ Türkçe ∙ українська ∙ 简体中文 ∙ 繁體中文 ∙ +/−

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	15:18, 12 June 2021		4,421 × 6,631 (24.65 MB)	Gildir	{{Information \|Description=The fully stacked twin solid rocket boosters for NASA’s {{w\|Space Launch System}} (SLS) rocket are seen on top of the mobile launcher inside High Bay 3 of the Vehicle Assembly Building (VAB) at the agency’s Kennedy Space Center in Florida on June 9, 2021. Now that booster stacking is complete inside the VAB, teams with NASA’s Exploration Ground Systems and contractor Jacobs are preparing to integrate the boosters with largest part of the SLS rocket, the massive 212-...

File usage

The following pages on the English Wikipedia use this file (pages on other projects are not listed):

Solid rocket booster

Global file usage

The following other wikis use this file:

Usage on uk.wikipedia.org
- Твердопаливний ракетний прискорювач

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon EOS 5D Mark IV
Author	NASA/Kim Shiflett
Copyright holder	For copyright and restrictions, refer to http://www.nasa.gov/multimedia/guidelines/index.html
Exposure time	1/125 sec (0.008)
F-number	f/5
ISO speed rating	2,500
Date and time of data generation	20:18, 9 June 2021
Lens focal length	16 mm
Label	Approved
Headline	AFS-8/101
Credit/Provider	NASA/Kim Shiflett
Source	Digital Still Image
Short title	Artemis I SLS Core Stage Prep for Lift/Mate
Image title	The fully stacked twin solid rocket boosters for NASA’s Space Launch System (SLS) rocket are seen on top of the mobile launcher inside High Bay 3 of the Vehicle Assembly Building (VAB) at the agency’s Kennedy Space Center in Florida on June 9, 2021. Now that booster stacking is complete inside the VAB, teams with NASA’s Exploration Ground Systems and contractor Jacobs are preparing to integrate the boosters with largest part of the SLS rocket, the massive 212-foot core stage, which arrived at Kennedy in April 2020. The 188,000-pound core stage alone will provide more than 2 million pounds of thrust during launch and ascent, and coupled with the boosters, will provide more than 8.8 million pounds of thrust to send the Artemis I mission to space. The first in an increasingly complex series of missions, Artemis I will test SLS and the Orion spacecraft as an integrated system ahead of crewed flights to the Moon.
Usage terms	PAO Approved For Release
City shown	KSC
Width	4,421 px
Height	6,631 px
Bits per component	8 8 8
Pixel composition	RGB
Orientation	Normal
Number of components	3
Horizontal resolution	240 dpi
Vertical resolution	240 dpi
Software used	Adobe Photoshop Lightroom Classic 10.2 (Windows)
File change date and time	11:55, 10 June 2021
Exposure Program	Manual
Exif version	2.31
Date and time of digitizing	20:18, 9 June 2021
Shutter speed	6.965784
APEX aperture	4.643856
Exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Center weighted average
Flash	Flash did not fire, compulsory flash suppression
Color space	sRGB
Focal plane X resolution	1,866.6666564941
Focal plane Y resolution	1,866.6666564941
Focal plane resolution unit	3
Custom image processing	Normal process
Exposure mode	Manual exposure
White balance	Auto white balance
Scene capture type	Standard
Serial number of camera	052023002860
Lens used	EF16-35mm f/2.8L III USM
Date metadata was last modified	08:26, 10 June 2021
Special instructions	06/09/2028
Unique ID of original document	8A948BACD17E49FCE07740C9C6867DBB
Keywords	Core Stage EGS KSC SLS Space Launch System VAB exploration ground systems vehicle assembly building
Sublocation of city shown	VAB
IIM version	4

File:Artemis I SLS Core Stage Prep for Lift Mate.jpg

Summary

Captions

Items portrayed in this file

depicts

Vehicle Assembly Building

inception

9 June 2021

captured with

Canon EOS 5D Mark IV

exposure time

0.008 second

f-number

5

focal length

16 millimetre

ISO speed

2,500

instance of

photograph

media type

image/jpeg

checksum

60248cfca48164a6cec455980bf46f178c32ab6f

data size

25,844,437 byte

height

6,631 pixel

width

4,421 pixel

File history

File usage

Global file usage

Metadata