Electric potential energy is a potential energy (measured in joules) that results from conservative Coulomb forces and is associated with the configuration of a particular set of point charges within a defined system. An object may have electric potential energy by virtue of two key elements: its own electric charge and its relative position to other electrically charged objects.
|Electric potential energy|
|SI unit||joule (J)|
|UE = C · V2 / 2|
The term "electric potential energy" is used to describe the potential energy in systems with time-variant electric fields, while the term "electrostatic potential energy" is used to describe the potential energy in systems with time-invariant electric fields.
The electric potential energy of a system of point charges is defined as the work required to assemble this system of charges by bringing them close together, as in the system from an infinite distance. Alternatively, the electric potential energy of any given charge or system of charges is termed as the total work done by an external agent in bringing the charge or the system of charges from infinity to the present configuration without undergoing any acceleration.
The electrostatic potential energy can also be defined from the electric potential as follows:
The SI unit of electric potential energy is joule (named after the English physicist James Prescott Joule). In the CGS system the erg is the unit of energy, being equal to 10−7 Joules. Also electronvolts may be used, 1 eV = 1.602×10−19 Joules.
Electrostatic potential energy of one point chargeEdit
One point charge q in the presence of another point charge QEdit
The electrostatic potential energy, UE, of one point charge q at position r in the presence of a point charge Q, taking an infinite separation between the charges as the reference position, is:
where is Coulomb's constant, r is the distance between the point charges q and Q, and q and Q are the charges (not the absolute values of the charges—i.e., an electron would have a negative value of charge when placed in the formula). The following outline of proof states the derivation from the definition of electric potential energy and Coulomb's law to this formula.
The electrostatic force F acting on a charge q can be written in terms of the electric field E as
By definition, the change in electrostatic potential energy, UE, of a point charge q that has moved from the reference position rref to position r in the presence of an electric field E is the negative of the work done by the electrostatic force to bring it from the reference position rref to that position r.
- r = position in 3d space of the charge q, using cartesian coordinates r = (x, y, z), taking the position of the Q charge at r = (0,0,0), the scalar r = |r| is the norm of the position vector,
- ds = differential displacement vector along a path C going from rref to r,
- is the work done by the electrostatic force to bring the charge from the reference position rref to r,
Usually UE is set to zero when rref is infinity:
When the curl ∇ × E is zero, the line integral above does not depend on the specific path C chosen but only on its endpoints. This happens in time-invariant electric fields. When talking about electrostatic potential energy, time-invariant electric fields are always assumed so, in this case, the electric field is conservative and Coulomb's law can be used.
Using Coulomb's law, it is known that the electrostatic force F and the electric field E created by a discrete point charge Q are radially directed from Q. By the definition of the position vector r and the displacement vector s, it follows that r and s are also radially directed from Q. So, E and ds must be parallel:
Using Coulomb's law, the electric field is given by
and the integral can be easily evaluated:
One point charge q in the presence of n point charges QiEdit
The electrostatic potential energy, UE, of one point charge q in the presence of n point charges Qi, taking an infinite separation between the charges as the reference position, is:
where is Coulomb's constant, ri is the distance between the point charges q and Qi, and q and Qi are the assigned values of the charges.
Electrostatic potential energy stored in a system of point chargesEdit
The electrostatic potential energy UE stored in a system of N charges q1, q2, …, qN at positions r1, r2, …, rN respectively, is:
where, for each i value, Φ(ri) is the electrostatic potential due to all point charges except the one at ri,[note 2] and is equal to:
The electrostatic potential energy UE stored in a system of two charges is equal to the electrostatic potential energy of a charge in the electrostatic potential generated by the other. That is to say, if charge q1 generates an electrostatic potential Φ1, which is a function of position r, then
Doing the same calculation with respect to the other charge, we obtain
The electrostatic potential energy is mutually shared by and , so the total stored energy is
This can be generalized to say that the electrostatic potential energy UE stored in a system of N charges q1, q2, …, qN at positions r1, r2, …, rN respectively, is:
Energy stored in a system of one point chargeEdit
The electrostatic potential energy of a system containing only one point charge is zero, as there are no other sources of electrostatic force against which an external agent must do work in moving the point charge from infinity to its final location.
A common question arises concerning the interaction of a point charge with its own electrostatic potential. Since this interaction doesn't act to move the point charge itself, it doesn't contribute to the stored energy of the system.
Energy stored in a system of two point chargesEdit
Consider bringing a point charge, q, into its final position near a point charge, Q1. The electric potential Φ(r) due to Q1 is
Hence we obtain, the electrostatic potential energy of q in the potential of Q1 as
Energy stored in a system of three point chargesEdit
The electrostatic potential energy of a system of three charges should not be confused with the electrostatic potential energy of Q1 due to two charges Q2 and Q3, because the latter doesn't include the electrostatic potential energy of the system of the two charges Q2 and Q3.
The electrostatic potential energy stored in the system of three charges is:
Using the formula given in (1), the electrostatic potential energy of the system of the three charges will then be:
Where is the electric potential in r1 created by charges Q2 and Q3, is the electric potential in r2 created by charges Q1 and Q3, and is the electric potential in r3 created by charges Q1 and Q2. The potentials are:
Where rij is the distance between charge Qi and Qj.
If we add everything:
Finally, we get that the electrostatic potential energy stored in the system of three charges:
Energy stored in an electrostatic field distribution in vacuumEdit
The energy density, or energy per unit volume, , of the electrostatic field of a continuous charge distribution is:
Since Gauss's law for electrostatic field in differential form states
- is the electric field vector
- is the total charge density including dipole charges bound in a material
- is the permittivity of free space,
so, now using the following divergence vector identity
using the divergence theorem and taking the area to be at infinity where
So, the energy density, or energy per unit volume of the electrostatic field is:
Energy stored in electronic elementsEdit
Some elements in a circuit can convert energy from one form to another. For example, a resistor converts electrical energy to heat. This is known as the Joule effect. A capacitor stores it in its electric field. The total electrostatic potential energy stored in a capacitor is given by
One may assemble charges to a capacitor in infinitesimal increments, , such that the amount of work done to assemble each increment to its final location may be expressed as
The total work done to fully charge the capacitor in this way is then
Notably, this expression is only valid if , which holds for many-charge systems such as large capacitors having metallic electrodes. For few-charge systems the discrete nature of charge is important. The total energy stored in a few-charge capacitor is
The total electrostatic potential energy may also be expressed in terms of the electric field in the form
where is the electric displacement field within a dielectric material and integration is over the entire volume of the dielectric.
The total electrostatic potential energy stored within a charged dielectric may also be expressed in terms of a continuous volume charge, ,
These latter two expressions are valid only for cases when the smallest increment of charge is zero ( ) such as dielectrics in the presence of metallic electrodes or dielectrics containing many charges.
- The reference zero is usually taken to be a state in which the individual point charges are very well separated ("are at infinite separation") and are at rest.
- The factor of one half accounts for the 'double counting' of charge pairs. For example, consider the case of just two charges.
- Media related to Electric potential energy at Wikimedia Commons