PDP-10 computers running the TOPS-10 operating system were labeled DECsystem-10 as a way of differentiating them from the PDP-11. Later on, those systems running TOPS-20 (on the KL10 PDP-10 processors) were labeled DECSYSTEM-20 (the block capitals being the result of a lawsuit brought against DEC by Singer, which once made a computer called "system-10"). The DECSYSTEM-20 was sometimes called PDP-20, although this designation was never used by DEC.
The following models were produced:
- DECSYSTEM-2020: bit-slice processor with up to 512 kilowords of solid state RAM (The ADP OnSite version of the DECSYSTEM-2020 supported 1 MW of RAM)
- DECSYSTEM-2040: ECL processor with up to 1024 kilowords of magnetic core RAM
- DECSYSTEM-2050: ECL processor with 2k words of cache and up to 1024 kilowords of RAM
- DECSYSTEM-2060: ECL processor with 2k words of cache and up to 4096 kilowords of solid state memory
- DECSYSTEM-2065: DECSYSTEM-2060 with MCA25 pager (double-sized (1024 entry) two-way associative hardware page table)
The only significant difference the user could see between a DECsystem-10 and a DECSYSTEM-20 was the operating system and the color of the paint. Most (but not all) machines sold to run TOPS-10 were painted "Blasi Blue", whereas most TOPS-20 machines were painted "Terracotta" (often mistakenly called "Chinese Red" or orange; the actual name of the color on the paint cans was Terracotta).
There were some significant internal differences between the earlier KL10 Model A processors, used in the earlier DECsystem-10s running on KL10 processors, and the later KL10 Model Bs, used for the DECSYSTEM-20s. Model As used the original PDP-10 memory bus, with external memory modules. The later Model B processors used in the DECSYSTEM-20 used internal memory, mounted in the same cabinet as the CPU. The Model As also had different packaging; they came in the original tall PDP-10 cabinets, rather than the short ones used later on for the DECSYSTEM-20.
The last released implementation of DEC's 36-bit architecture was the single cabinet DECSYSTEM-2020, using a KS10 processor.
The DECSYSTEM-20 was primarily designed and used as a small mainframe for timesharing. That is, multiple users would concurrently log on to individual user accounts and share use of the main processor to compile and run applications. Separate disk allocations were maintained for all users by the operating system, and various levels of protection could be maintained by for System, Owner, Group, and World users. A model 2060, for example, could typically host up to 40 to 60 simultaneous users before exhibiting noticeably reduced response time.
The Living Computer Museum of Seattle, Washington maintains a 2065 running TOPS-10, which is available to interested parties via SSH upon registration (at no cost) at their website.
- This article is based in part on the Jargon File, which is in the public domain.
- C. Gordon Bell, Alan Kotok, Thomas N. Hasting, Richard Hill, "The Evolution of the DECsystem-10", in C. Gordon Bell, J. Craig Mudge, John E. McNamara, Computer Engineering: A DEC View of Hardware Systems Design (Digital Equipment, Bedford, 1979)
- Frank da Cruz, Christine Gianone, The DECSYSTEM-20 at Columbia University 1977–1988
- Storage Organization and Management in TENEX. Daniel L. Murphy. AFIPS Proceedings, 1972 FJCC.
- "DECsystem-10/DECSYSTEM-20 Processor Reference Manual". 1982.
- "Manuals for DEC 36-bit computers".
- "Introduction to DECSYSTEM-20 Assembly Language Programming" (Ralph E. Gorin, 1981, ISBN 0-932376-12-6)