This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)(Learn how and when to remove this template message)
There are two types of agricultural crop residues. Field residues are materials left in an agricultural field or orchard after the crop has been harvested. These residues include stalks and stubble (stems), leaves, and seed pods. The residue can be ploughed directly into the ground, or burned first. In contrast, no-till, strip-till or reduced till agriculture practices are carried out to maximize crop residue cover. Good management of field residues can increase efficiency of irrigation and control of erosion. Simple line transect measurements can be used to estimate residue coverage. Process residues are materials left after the crop is processed into a usable resource. These residues include husks, seeds, bagasse, molasses and roots. They can be used as animal fodder and soil amendment, fertilizers and in manufacturing.
Most discussions about the economic value of crop residues focus on the equivalent fertilizer cost of the nutrients within. Although crop residues contain both macro- and micro nutrients, only values for the macro nutrients nitrogen, phosphorus, potassium and sulfur are economically significant.
Biofuel production from crop residuesEdit
Because of the high carbohydrate content, crop residues can be considered as an appropriate feedstock to produce biofuels. Some algorithms have been developed to estimate the potential capacity of biofuel production from agricultural residues. Based on the experimental data obtained from a study that used ethanol organosolv pretreated rice straw to produce biohydrogen using Enterobacter aerogenes, the annual global amount of collectable rice straw (not total produced straw) for biofuel production was estimated about 249 million tonnes, that could approximately produce 355.78 kilotonnes of hydrogen and 11.32 million tonnes of lignin by the proposed organosolv technology and it was found that China contributes to about 32% of global potential capacity to produce biohydrogen from rice straw.
Nutrients in most crop residue are not immediately available for crop use. Their release (called mineralization) occurs over a period of years. The biological processes involved in soil nutrient cycles are complex. As a rough guide, cereal straw releases about 10 to 15 per cent of its nutrients and pea residues release about 35 percent of their nutrients by the next year.
The speed of mineralization depends on the nitrogen and lignin (fiber) content, soil moisture, temperature, and degree of mixing with the soil. N is released fairly quickly from residue when the content is higher than 1.5 per cent (such as in pea residues). In contrast, below 1.2 per cent (such as cereal residue), soil-available N is fixed (called immobilization) by the microbes as they decompose the residue.
Thus pea residue would have short- and long-term benefits to soil fertility, whereas cereal straw would reduce next year's soil supply of available nutrients. Over time, the nutrients fixed by soil microbes and humus are released and available to crops. Nutrients from residue are not fully recovered by crops. Just like fertilizer nutrients, nutrients released from crop residue into the soil are susceptible to losses such as leaching (N and S), denitrification (N), immobilization (N, P, K and S), and fixation (P and K).
Efficiency of nutrient uptakeEdit
The efficiency of nutrient uptake by crops from fertilizers or residue release is generally thought to be similar. For example, about 50 percent recovery of N in the above-ground plant in the first year. There is some residual benefit of fertilizers as the crops take up a small amount of the nutrients two and three years later. Fertilizer placement can significantly affect the efficiency of crop uptake. The impact of residue placement (buried by tillage or left on the surface in zero tillage) on nutrient cycling and efficiency is under study.
Thus, the practice of calculating the fertilizer equivalent value of the nutrients in crop residue is a reasonable guide to estimating the partial value of crop residues.
- Richards, B. K.; Muck, R. E.; Walter, M. F. (1 January 1984). "Variation in line transect measurements of crop residue cover". Journal of Soil and Water Conservation. 39 (1): 60–61. ISSN 0022-4561.
- Asadi, Nooshin; Karimi Alavijeh, Masih; Zilouei, Hamid (2017). "Development of a mathematical methodology to investigate biohydrogen production from regional and national agricultural crop residues: A case study of Iran". International Journal of Hydrogen Energy. 42: 1989–2007. doi:10.1016/j.ijhydene.2016.10.021.
- Karimi Alavijeh, Masih; Yaghmaei, Soheila (2016). "Biochemical production of bioenergy from agricultural crops and residue in Iran". Waste Management. 52: 375–394. doi:10.1016/j.wasman.2016.03.025.
- Asadi, Nooshin; Zilouei, Hamid (March 2017). "Optimization of organosolv pretreatment of rice straw for enhanced biohydrogen production using Enterobacter aerogenes". Bioresource Technology. 227: 335–344. doi:10.1016/j.biortech.2016.12.073. PMID 28042989.
- Alemayehu Mengistu. 1985. Feed resources in Ethiopia. A paper presented at the Workshop on Animal Feed Resources for Small Scale livestock Producers, 11–15 November 1985, Nairobi, Kenya. 12 pp.
- Butterworth, M.H.; Mosi, A.K. (1986). "The voluntary intake and digestibility of combinations of cereal crop residues and legume hay for sheep". ILCA Bulletin. 24: 14–17.