Carbon dioxide reforming

Carbon dioxide reforming (also known as dry reforming) is a method of producing synthesis gas (mixtures of hydrogen and carbon monoxide) from the reaction of carbon dioxide with hydrocarbons such as methane with the aid of metal catalysts (typically Ni or Ni alloys).[1][2] Synthesis gas is conventionally produced via the steam reforming reaction or coal gasification. In recent years, increased concerns on the contribution of greenhouse gases to global warming have increased interest in the replacement of steam as reactant with carbon dioxide.[3]

The dry reforming reaction may be represented by:

Thus, two greenhouse gases are consumed and useful chemical building blocks, hydrogen and carbon monoxide, are produced. A challenge to the commercialization of this process is that the hydrogen that is produced tends to react with carbon dioxide. For example, the following reaction typically proceeds with lower activation energy than the dry reforming reaction itself:

Another issue with dry reforming is situated in the fact that it operates at conditions that produces water. As a result, this water can lead to unwanted back-reaction to CO2 via the water-gas shift reaction. To prevent CO2 from being formed, and consequently losses in CO yield, CO2 can be adsorbed onto calcium oxide. Consequently, the process forms only CO and H2O, increasing the utilization efficiency of the feedstocks. This process is better known as super-dry reforming.[4]

CO2 can be dry reformed in to CO gas at 800-850 °C by reacting with petcoke, biochar, coal, etc. using low cost iron based catalysts. Using cheaper renewable electricity like solar or wind energy, this cheaper method converts petcoke and green house gas CO2 in to useful fuel like methanol achieving carbon capture and utilization.[5] Some CO gas is converted in to hydrogen via water-gas shift reaction.


References

edit
  1. ^ Fan, M.-S.; Abdullah, A.Z.; Bhatia, S. (2009). "Catalytic Technology for Carbon Dioxide Reforming of Methane to Synthesis Gas". ChemCatChem. 1 (2): 192–208. doi:10.1002/cctc.200900025. S2CID 98796593.
  2. ^ Bian, Z.; Das, S.; Wai, M.H.; Hongmanorom, P.; Kawi, S. (2017). "A Review on Bimetallic Nickel-Based Catalysts for CO2 Reforming of Methane". ChemPhysChem. 18 (22): 3117–3134. doi:10.1002/cphc.201700529. PMID 28710875.
  3. ^ Halmann, Martin M. (1993). "Carbon Dioxide Reforming". Chemical fixation of carbon dioxide: methods for recycling CO2 into useful products. CRC Press. ISBN 978-0-8493-4428-2.
  4. ^ "Dream or Reality? Electrification of the Chemical Process Industries". www.aiche-cep.com. Retrieved 2021-08-22.
  5. ^ "Catalysts for Thermal Conversion of Carbon Dioxide to Carbon Monoxide or Synthesis Gas Using Fuels". Retrieved 18 April 2022.