CGR 1st Class 2-6-0 1876 Kitson

The Cape Government Railways 1st Class 2-6-0 of 1876 by Kitson was a South African steam locomotive from the pre-Union era in the Cape of Good Hope.

CGR 1st Class 2-6-0 1876 Kitson
South African Class 01 2-6-0ST
No. 123 (ex no. M23), still as a tender locomotive
Type and origin
♠ 2-6-0 tender locomotive
2-6-0ST saddle-tank locomotive
Power typeSteam
DesignerKitson and Company
BuilderKitson and Company
Serial number2079–2086
Build date1876–1877
Total produced8
RebuilderCape Government Railways
Number rebuilt8 rebuilt to saddle tank
Specifications
Configuration:
 • Whyte2-6-0 (Mogul)
 • UIC1Cn2
Driver2nd coupled axle
Gauge3 ft 6 in (1,067 mm) Cape gauge
Leading dia.24 in (610 mm)
Coupled dia.39 in (991 mm)
Tender wheels33 in (838 mm)
Wheelbase:
 • Axle spacing
(Asymmetrical)
1-2: 3 ft 5 in (1,041 mm)
2-3: 4 ft 1 in (1,245 mm)
 • Engine11 ft 3+12 in (3,442 mm)
 • Coupled7 ft 6 in (2,286 mm)
 • Tender8 ft (2,438 mm)
Length:
 • Over couplers 22 ft 9+12 in (6,947 mm)
Height11 ft 4+12 in (3,467 mm)
Axle load 7 LT 8 cwt (7,519 kg) ​
 • Leading 5 LT 6 cwt (5,385 kg)
 • 1st coupled 6 LT 16 cwt (6,909 kg)
 • 2nd coupled 7 LT 8 cwt (7,519 kg)
 • 3rd coupled 6 LT 3 cwt (6,249 kg)
Adhesive weight 20 LT 7 cwt (20,680 kg)
Loco weight 25 LT 13 cwt (26,060 kg)
Tender weight♠ 17 LT 17 cwt (18,140 kg)
Tender type3-axle
Fuel typeCoal
Fuel capacity♠ 2 LT 10 cwt (2.5 t)
10 long hundredweight (0.5 t)
Water cap. 520 imp gal (2,360 L)
Tender cap.♠ 1,700 imp gal (7,730 L)
Firebox:
 • TypeRound-top
 • Grate area10 sq ft (0.93 m2)
Boiler:
 • Pitch5 ft 8 in (1,727 mm)
Boiler pressure140 psi (965 kPa)
Safety valveSalter
Heating surface:
 • Firebox49 sq ft (4.6 m2)
 • Tubes483 sq ft (44.9 m2)
 • Total surface532 sq ft (49.4 m2)
CylindersTwo
Cylinder size12 in (305 mm) bore
20 in (508 mm) stroke
Valve gearStephenson
CouplersJohnston link-and-pin
Performance figures
Tractive effort7,754 lbf (34.49 kN) @ 75%
Career
OperatorsCape Government Railways
South African Railways
ClassCGR 1st Class, SAR Class 01
Number in class8
NumbersM17-M24
Delivered1876–1877
First run1876

In 1876 and 1877, the Cape Government Railways placed eight 2-6-0 Mogul type tender locomotives, built by Kitson, in service on the Cape Midland system. They were all eventually rebuilt to saddle-tank locomotives for use as shunting engines. Later, when a classification system was introduced by the Railways, they were designated 1st Class.[1][2]

Manufacturer

edit

Eight 2-6-0 Mogul type tender locomotives were delivered to the Cape Government Railways (CGR) from Kitson and Company in 1876 and 1877, numbered in the range from M17 to M24.[1][2][3]

The locomotives were equipped with six-wheeled tenders. The engines were very similar to a pair of 2-6-0T Stephenson's Patent back-to-back locomotives which had been delivered to the Midland System from the same manufacturer earlier in 1876. The two types differed in respect of their boiler pitch, which was 5 inches (127 millimetres) higher on the tender locomotives, and their wheelbase and coupled wheel spacing, with the second and third coupled wheels 3 inches (76 millimetres) further apart on the back-to-back tank locomotives.[1][2][3]

Characteristics

edit

The locomotives were very similar in appearance to the Beyer, Peacock-built 2-6-0 locomotives which were delivered to the Western System in that same year. The most obvious difference was the steam dome which was located further forward on the boiler on the Kitson engines, about midway between cab and chimney.[1]

The feedwater pump, attached to the right hand side of the spectacle plate, was actuated from the piston crosshead. The locomotive was, in addition, equipped with a small feedwater injector feed attached to the left side of the smokebox, for use in cases of emergency or while the locomotive was stationary. The injector had been invented by the French engineer Henri Giffard in 1852.[4]

Tyre wear was reduced by supplying jets of water, fed from 12 inch (13 millimetres) diameter pipes, to the leading wheels while rounding curves. This was found to diminish friction significantly.[4]

The cylinders and slide valve faces were lubricated by tallow cups, attached to the sides of the cylinder assembly. When melted tallow was later found to be unsatisfactory, it was replaced by vegetable oils.[4]

Rebuilding

edit

The eight locomotives were eventually all rebuilt for use in shunting service by relieving them of their tenders and equipping them with saddle-tanks. This was probably done while they were gradually getting withdrawn from mainline work. The main picture shows no. 123 still as a tender locomotive and can be dated to somewhere between c. 1886, when it was renumbered from M23 to 123, and c. 1890, when it was renumbered to 223.[1][2][3][5]

Service

edit

Cape Government Railways

edit

By year-end 1896, five of the locomotives were no longer reflected in the CGR registers. The remaining three all ended up being employed as shunting engines in Port Elizabeth, where they spent the rest of their service lives. When a classification system was introduced on the CGR, they were designated 1st Class.[1][2][5][6]

South African Railways

edit

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Even though the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways was only implemented with effect from 1 January 1912.[6][7]

By 1912, the three remaining shunting engines in Port Elizabeth still survived to be taken onto the SAR roster. Since they were considered obsolete by the SAR, they were designated Class 01 and renumbered by having the numeral 0 prefixed to their existing numbers. Even though they were considered obsolete, two of them were only scrapped in the 1930s.[2][5][6][8]

Renumbering

edit

During the CGR era, all these locomotives were renumbered more than once. By 1886, the Midland System's "M" prefix was replaced by the numeral 1. They were renumbered at least twice more, by 1890 and by 1896. The works numbers, years in service, original numbers and known renumbering of the Cape 1st Class Kitson-built Moguls of 1876 are listed in the table.[1][2][6][9]

Oranje-Vrijstaat Gouwerment-Spoorwegen

edit

Towards the end of 1896, a CGR 2-6-0 saddle-tank locomotive was sold to the Oranje-Vrijstaat Gouwerment-Spoorwegen (OVGS), where it was classified as 2nd Class, allocated number 3 and named Bloemfontein. It was employed as shop locomotive at the Bloemfontein railway workshops.[1][10]

During the Second Boer War, engine no. 3 came onto the roster of the Imperial Military Railways (IMR) as no. 303. The IMR was transformed into the Central South African Railways (CSAR) when the war ended, and the locomotive retained the number 303.[10]

Until photographic evidence came to light which proved differently, it had been believed that this locomotive was the Midland System's Kitson-built no. M22. However, judging from the position of the steam dome on engine no. 303, depicted after a turntable mishap, it was rebuilt from one of the Beyer, Peacock 1st Class 2-6-0 tender locomotives which had been built by Avonside Engine Company in 1877, on which the steam dome was located further back, closer to the cab.[9]

The original locomotive was, most likely, the Western System's no. W22 which was also no longer reflected in the CGR registers by year-end in 1896. It is possible that a transcription error during research may have led to the number W22 being recorded as number M22.[9]

References

edit
  1. ^ a b c d e f g h Holland, D.F. (1971). Steam Locomotives of the South African Railways. Vol. 1: 1859–1910 (1st ed.). Newton Abbott, England: David & Charles. pp. 28, 106. ISBN 978-0-7153-5382-0.
  2. ^ a b c d e f g C.G.R. Numbering Revised, Article by Dave Littley, SA Rail May–June 1993, pp. 94–95.
  3. ^ a b c Back-to-back – The known facts
  4. ^ a b c Espitalier, T.J.; Day, W.A.J. (1943). The Locomotive in South Africa - A Brief History of Railway Development. Chapter II - The Cape Government Railways (Continued). South African Railways and Harbours Magazine, September 1943. pp. 657-659.
  5. ^ a b c Holland, D. F. (1972). Steam Locomotives of the South African Railways. Vol. 2: 1910-1955 (1st ed.). Newton Abbott, England: David & Charles. pp. 118–121. ISBN 978-0-7153-5427-8.
  6. ^ a b c d Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 2, 18. (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  7. ^ The South African Railways – Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  8. ^ Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 16. ISBN 0869772112.
  9. ^ a b c True identity of CSAR no. 303 Bloemfontein
  10. ^ a b Updated information on the 1st Class Kitsons