Classification of European Inland Waterways

(Redirected from CEMT Class)

The Classification of European Inland Waterways is a set of standards for interoperability of large navigable waterways forming part of the Trans-European Inland Waterway network within Continental Europe and Russia. It was created by the European Conference of Ministers of Transport (ECMT; French: Conférence européenne des ministres des Transports, CEMT) in 1992,[1] hence the range of dimensions are also referred to as CEMT Class I–VII.

Structures such as the Niederfinow Boat Lift limit the dimensions of vessels. As of 2012 a second lift is being constructed to a larger size.[needs update]

The size for each waterway is limited by the dimensions of the structures including the locks and boat lifts on the route.

Classification

edit

Class I corresponds to the historical Freycinet gauge decreed in France during 1879. The larger river classification sizes are focused on the carriage of intermodal containers in convoys of barges propelled by a push-tug. Most of the canals of the United Kingdom have smaller locks and would fall below the dimensions in the European classification system. In 2004, the standards were extended with four smaller sizes RA–RD covering recreational craft, which had originally been developed and proposed via PIANC.[2] The proposal to add the recreational sizes was adopted by United Nations Economic Commission for Europe resolution 52.[3][4] In 2015 an updated version was published.[5]

Type of inland
waterways
Classes of
navigable waterways
Motor vessels and barges Pushed convoys Minimum height under bridges (m)
Designation Length (m) Breadth (m) Draught (m) Tonnage (t) Length (m) Breadth (m) Draught (m) Tonnage (t)
For recreational
navigation
RA Open boat 5.5 2.00 0.50 2.00
RB Cabin cruiser 9.5 3.00 1.00 3.25
RC Motor yacht 15.0 4.00 1.50 4.00
RD Sailing boat 15.0 4.00 2.10 30.00
Of regional
importance to
east of Elbe
I Gross Finnow 41 4.7 1.40 180 3.0
II BM–500 57 7.5–9.0 1.60 500–630
III 67–70 8.2–9.0 1.60–2.00 470–700 118–132 8.2–9.0 1.6–2.0 1,000–1,200 4.0
Of regional
importance to
west of Elbe
I Barge 38.5 5.05 1.80–2.20 250–400
II Kampine-Barge 50.0–55.0 6.6 2.50 400–650 4.0–5.0
III Gustav Koenigs [de] 67.0–80.0 8.2 2.50 650–1,000
Of international
importance
IV Johann Welker [de] 80.0–85.0 9.5 2.50 1,000–1,500 85 9.5 2.5–2.8 1,250–1,450 5.25 or 7.00
Va Large Rhine class [de] 95–110 11.4 2.5–4.5 1,600–3,000 5.25 or 7.00 or 9.10
Vb 1×2 convoy 172–185 3,200–6,000
VIa 2×1 convoy 95–110 22.8 7.00 or 9.10
VIb 2×2 convoy 140.0 15.0 3.90 185–195 6,400–12,000
VIc 2×3 convoy 270–280 2.5–4.0 9,600–18,000 9.10
3×2 convoy 195–200 33.0–34.2 2.5–4.5
VII 3×3 convoy 285 14,500–27,000

See also

edit

References

edit
  1. ^ European Conference of Ministers of Transport (12 June 1992). Resolution No. 92/2 on New Classification of Inland Waterways (PDF) (Report). Retrieved 2018-08-30.
  2. ^ RecCom Working Group 8 (2000). Standards for the Use of Inland Waterways by Recreational Craft (Report). PIANC. pp. 30–32. ISBN 2-87223-115-3. Retrieved 11 July 2012.{{cite report}}: CS1 maint: numeric names: authors list (link)
  3. ^ Edwards-May, David (3 July 2007). Classification of Recreational waterways (PDF) (Report). Lille: Stichting Recreatietoervaart Nederland. Retrieved 11 July 2012.[permanent dead link]
  4. ^ Working Party on Inland Water Transport (19 November 2004). "Resolution No.52" (PDF). European Recreational Inland Navigation Network. Geneva: Economic Commission for Europe Inland Transport Committee.
  5. ^ European Court of Auditors. (2015). Inland Waterway Transport in Europe: no significant improvements in modal share and navigability conditions since 2001 (PDF). Luxembourg: Luxembourg: Publications Office of the European Union. p. 37. doi:10.2865/158305. ISBN 978-92-872-1948-0. ISSN 1977-5679. Archived (PDF) from the original on 2015-03-18. Retrieved 27 December 2021. {{cite book}}: |website= ignored (help)

Publications including the full classification table

edit