The Benelli CB-M2 was an Italian simple blowback submachine gun resulting from a joint venture between Benelli and Fiocchi Munizioni.[1]

Benelli CB M2
TypeSubmachine gun
Place of originItaly
Production history
Designed1980s
ManufacturerBenelli
Specifications
Mass3.40 kg
Barrel length200 mm

Cartridge9×25 mm AUPO
Caliber9 mm
ActionBlowback
Rate of fire800–1000
Muzzle velocity390
Feed system40-round magazine
SightsFixed iron sights

The weapon was chambered for the semi-caseless 9mm AUPO round. The AUPO bullet had an elongated, hollow base that acted as the case. The propellant filled the hollow space, and was sealed into the bullet with a fulminate plug. The AUPO round was "semi-caseless" because the hollow base of the bullet detached from the bullet itself after firing. However, it was not necessary to eject it from the side of the weapon as in a normal cartridge, because the base followed the bullet down the barrel and exited at the muzzle, in a similar fashion to a sabot. This simplified the action of the weapon, allowing it to move back and draw another round from the magazine, since there was no case to eject. With the omission of the ejector mechanism and the ejection step in the action, there were fewer moving parts to jam and cause unreliable functioning of the weapon.[2] The CB M2 never found any customers and the project was shelved.[1]

See also

edit
edit

References

edit
  1. ^ a b Hogg, Ian V. (2001). Submachine Guns. Greenhill Books. p. 88. ISBN 978-1-85367-448-8. This remarkable weapon was a cooperative venture by Armi Benelli and Fiocchi, the cartridge manufacturers. numerous countries tried it but in the end nobody adopted it and by the end of the 1980s the CB M2 and its AUPO cartridge were history.
  2. ^ Konig, Klaus-Peter; Hugo, Martin (1992). 9 MM Parabellum: A History of the World's 9mm Pistols and Ammunition. Schiffer Pub Limited. p. 299. ISBN 978-0-88740-342-2.