 | This template uses Lua: |
{{Infobox mill building}} may be used to summarize information about a building. It can be used in two ways with named parameters or with ten unnamed parameters.
Usage edit
{{Infobox mill building
| name =
| building_name =
| native_building_name =
| alternate_names =
| image =
| caption =
| textile_type =
| building_type =
| architectural_style =
| structural_system =
| cost =
| employees =
<!-- For titles and maps-- geo info-->
| location =
| altitude =
| map_type =
| serving_canal =
| serving_railway =
| serving_river =
| owner =
| owner_2 =
| acquisition_date_2 =
| owner_3 =
| acquisition_date_3 =
| owner_4 =
| acquisition_date_4 =
| current_tenant =
| current_owner =
| coordinates = <!-- {{coord}} -->
| oscoor =
| start_date =
| completion_date =
| renovation_date = <! or re-equipment_date_1 -->
| re-equipment_date_2 =
| re-equipment_date_3 =
| current_status =
| demolition_date =
| destruction_date =
<!-- Dimensions-->
| height =
| other_dimensions =
| floor_count =
| floor_area =
| floor_height =
| floor_usage =
<!-- The building team -->
| main_contractor =
| architect =
| architecture_firm =
| structural_engineer =
| other_designers =
| awards =
| ren_cost =
<!-- Steam powered-->
| engine_date =
| engine_decommissioned =
| engine_maker =
| engine_type =
| engine_valve =
| engine_cylinder =
| engine_rpm =
| engine_kWatt =
| engine_ihp =
| engine_fly_diameter =
| transmission_type =
| no_of_ropes =
| boilers =
| boiler_temperature =
| psi =
<!-- Watermills -->
| wheels =
| diameter_of_water_wheel =
| width_of_wheel =
| wheel_rpm =
<!-- Equipment-->
| equipment_maker =
| date_of_equipping =
| no_of_looms =
| cotton_count =
| scutchers =
| carding_engines =
| doublers =
| kiers =
| other_equipment =
| mule_frames =
| ring_frames =
<!-- References-->
| embedded =
| references =
}}
Parameters edit
Unnamed parameters
- Mill name
- Location
- Coordinate
- Reference
- Notes- Description (not yet displayed)
- Image
- Architect/Owner (some lists use different info (not yet displayed)
- Built
- Decommissioned
- Demolished
The purpose of this is to allow lists of mills to be constructed using the {{TMbegin}}, {{TMtr}}, {{TMend}} sequence. The {{TMtr}} can be copied directly across into a new article and renamed {{Infobox mill building}} as the unnamed parameters transfer directly across. The new Infobox can then be edited, and as new data is input it will over-ride potentially conflicting parameters. Similarly, any {{Infobox mill building}} named-parameters can safely be added to a {{TMtr}} call, as they will be safely ignored while on the list page- but will then be valid here if a copy is made.
The named parameters are seen in the section below.
Example edit
 Regent Mill in 1950 | |
| Cotton | |
|---|---|
| Spindles | 60000 |
| Spinning (ring mill) | |
| Current status | Standing, usage changed |
| Structural system | Red engineering brick |
| Location | Failsworth, Oldham |
| Serving canal | Rochdale Canal |
| Serving railway | Oldham Loop Line |
| Further ownership |
|
| Coordinates | SD789345 |
| Construction | |
| Built | 1906 |
| Demolished | Chimney 1964 |
| Floor count | 4 |
| Floor area | 345 by 130 feet (105 by 40 m) |
| Floor usage | In 1950:
|
| Other dimensions | Chimney 210 feet (64 m) |
| Design team | |
| Architect | George Stott |
| Power | |
| Date | 1906 |
| Engine maker | Buckley and Taylor of Oldham |
| Decommissioned | 1958 |
| Engine type | marine type vertical triple expansion engine |
| Cylinder diameter and throw | 63-inch diameter low-pressure cylinder |
| rpm | 64 |
| Installed horse power (ihp) | 1800 ihp sometimes loaded to 2000 ihp |
| Flywheel diameter | 26 feet (7.9 m) |
| Transmission type | rope |
| No. of ropes | 26 ropes |
| Boiler configuration | |
| Boilers | ? Dual Lancashire ? |
| Mule Frames | 60000 |
| References | |
| Dunkerley, Philip. "Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth". Retrieved 2009-01-09. | |
{{Infobox mill building
| building_name = Regent Mill
| native_building_name =
| alternate_names =
| image = Mill-image-pending.jpg
| caption = Regent Mill in 1950
| textile_type = [[Cotton]]
| building_type = [[Cotton-spinning machinery|Spinning (ring mill)]]
| architectural_style =
| structural_system = Red engineering brick
| cost =
| location = [[Failsworth]], Oldham
| serving_canal = [[Rochdale Canal]]
| serving_railway = [[Oldham Loop Line]]
| owner =
| owner_2 = LCC
| acquisition_date_2 = 1930
| owner_3 = Salton
| acquisition_date_3 =
| owner_4 =
| acquisition_date_4 =
| current_tenant =
| coordinates = {{coord|53.5087|-2.1604|display=inline|region:GB|format=dms}}
| oscoor = SD 789345
| altitude =
| start_date = 1906
| completion_date =
| renovation_date =
| demolition_date = Chimney 1964
| current_status = Standing, usage changed
| height =
| other_dimensions = Chimney {{convert|210|ft|m}}
| floor_count = 4
| floor_area = {{convert|345|by|130|ft|m}}
| floor_height =
| floor_usage = In 1950:
*cellar: a warehouse, yarn cellar, waste room, cotton room, and dust room.
*The first floor was the card room,
*The second floor was the ring frame room
*The third
| architecture_firm =
| structural_engineer =
| other_designers =
| awards =
| engine_date = 1906
| engine_decommissioned = 1958
| engine_maker = [[Buckley and Taylor of Oldham]]
| engine_type = marine type vertical triple expansion engine
| engine_valve =
| engine_cylinder = 63-inch diameter low-pressure cylinder
| engine_rpm = 64
| engine_kWatt =
| engine_ihp = 1800 ihp sometimes loaded to 2000 ihp
| engine_fly_diameter = {{convert|26|ft|m}}
| transmission_type = rope
| no_of_ropes = 26 ropes
| boilers = ? Dual Lancashire ?
| boiler_temperature =
| psi =
| spindles = 60000
| references = {{cite web|url=http://dunkerley-tuson.co.uk/regentmill.aspx|title=Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth|last=Dunkerley|first=Philip|accessdate=2009-01-09}}
}}
Microformat edit
The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates edit
If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes edit
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision edit
When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.