Wootz steel is a crucible steel characterized by a pattern of bands. These bands are formed by sheets of microscopic carbides within a tempered martensite or pearlite matrix in higher carbon steel, or by ferrite and pearlite banding in lower carbon steels. It was a pioneering steel alloy developed in Southern India and Tamraparni (ancient Sri Lanka) in the 6th century BC and exported globally. It was also known in the ancient world by many different names including ukku, Hindvi steel, Hinduwani steel, Teling steel and seric iron.
Wootz steel originated in South India, in Tamilakam present day Tamil Nadu and Kerala, and ancient Sri Lanka (Tamraparni). There are several ancient Tamil, Greek, Chinese and Roman literary references to high carbon Tamil steel. The crucible steel production process started in the 6th century BC, at production sites of Kodumanal in Tamil Nadu, Golconda in Telangana, Karnataka and Sri Lanka and exported globally; the Tamils of the Chera Dynasty producing what was termed the finest steel in the world, i.e., Seric Iron to the Romans, Egyptians, Chinese and Arabs by 500 BC. The steel was exported as cakes of steely iron that came to be known as "Wootz". Wootz steel in India had high amounts of carbon in it.
The Tamilakam method was to heat black magnetite ore in the presence of carbon in a sealed clay crucible inside a charcoal furnace to completely remove slag. An alternative was to smelt the ore first to give wrought iron, then heat and hammer it to remove slag. The carbon source was bamboo and leaves from plants such as Avārai. The Chinese and locals in Sri Lanka adopted the production methods of creating wootz steel from the Chera Tamils by the 5th century BC. In Sri Lanka, this early steel-making method employed a unique wind furnace, driven by the monsoon winds. Production sites from antiquity have emerged, in places such as Anuradhapura, Tissamaharama and Samanalawewa, as well as imported artifacts of ancient iron and steel from Kodumanal. A 200 BC Tamil trade guild in Tissamaharama, in the South East of Sri Lanka, brought with them some of the oldest iron and steel artifacts and production processes to the island from the classical period.
The Arabs introduced the South Indian/Sri Lankan wootz steel to Damascus, where an industry developed for making weapons of this steel. The 12th century Arab traveler Edrisi mentioned the "Hinduwani" or Indian steel as the best in the world. Arab accounts also point to the fame of ‘Teling’ steel, which can be taken to refer to the region of Telengana. Golconda region of Telangana clearly being nodal centre for the export of wootz steel to West Asia
Another sign of its reputation is seen in a Persian phrase – to give an "Indian answer", meaning "a cut with an Indian sword". Wootz steel was widely exported and traded throughout ancient Europe and the Arab world, and became particularly famous in the Middle East.
Development of modern metallurgyEdit
From the 17th century onwards, several European travelers observed the steel manufacturing in South India, at Mysore, Malabar and Golconda. The word "wootz" appears to have originated as a mistranscription of wook, The Tamil language root word for the alloy is urukku. Another theory says that the word is a variation of uchcha or ucha ("superior"). According to one theory, the word ukku is based on the meaning "melt, dissolve"; other Dravidian languages have similar-sounding words for steel. ukku, the word for steel in the Kannada and Telugu languages. When Benjamin Heyne inspected the Indian steel in Ceded Districts and other Kannada-speaking areas, he was informed that the steel was ucha kabbina ("superior iron"), also known as ukku tundu in Mysore.
Legends of wootz steel and Damascus swords aroused the curiosity of the European scientific community from the 17th to the 19th century. The use of high-carbon alloys was not known in Europe previously and thus the research into wootz steel played an important role in the development of modern English, French and Russian metallurgy.
In 1790, samples of wootz steel were received by Sir Joseph Banks, president of the British Royal Society, sent by Helenus Scott. These samples were subjected to scientific examination and analysis by several experts.
Specimens of daggers and other weapons were sent by the Rajahs of India to the Great Exhibition in London in 1851 and 1862 International Exhibition. Though the arms of the swords were beautifully decorated and jeweled, they were most highly prized for the quality of their steel. The swords of the Sikhs were said to bear bending and crumpling, and yet be fine and sharp.
Wootz is characterized by a pattern caused by bands of clustered Fe
3C particles made by microsegregation of low levels of carbide-forming elements. The presence of cementite nanowires, and carbon nanotubes has been identified by Peter Paufler of TU Dresden in the microstructure of wootz steel. There is a possibility of an abundance of ultrahard metallic carbides in the steel matrix precipitating out in bands. Wootz swords, especially Damascus blades, were renowned for their sharpness and toughness.
This section needs additional citations for verification. (April 2016) (Learn how and when to remove this template message)
Russian metallurgist Pavel Petrovich Anosov (see Bulat steel) was almost able to reproduce ancient Wootz steel with nearly all of its properties and the steel he created was very similar to traditional Wootz. He documented four different methods of producing Wootz steel that exhibited traditional patterns. He died before he could fully document and publish his research. Oleg Sherby and Jeff Wadsworth and Lawrence Livermore National Laboratory have all done research, attempting to create steels with characteristics similar to Wootz, but without success. J.D Verhoeven and Alfred Pendray reconstructed methods of production, proved the role of impurities of ore in the pattern creation, and reproduced Wootz steel with patterns microscopically and visually identical to one of the ancient blade patterns. Reibold et al's analyses spoke of the presence of carbon nanotubes enclosing nanowires of cementite, with the trace elements/impurities of vanadium, molybdenum, chromium etc contributing to their creation, in cycles of heating/cooling/forging. This resulted in a hard high carbon steel that remained malleable 
There are other smiths who are now consistently producing Wootz steel blades visually identical to the old patterns.
Wootz was made over nearly a 2,000-year period (the oldest sword samples date to around 200 AD) and the methods of production of ingots, the ingredients, and the methods of forging varied from one area to the next. Some Wootz blades displayed a pattern, while some did not. Heat treating was quite different from forging, and there were many different patterns which were created by the various smiths who spanned from China to Scandinavia.
- Srinivasan, Sharada; Ranganathan, Srinivasa (2004). "India's Legendary Wootz Steel: An Advanced Material of the Ancient World". Iron & Steel Heritage of India: 69–82. OCLC 82439861.
- Ward, Gerald W. R. (2008). The Grove Encyclopedia of Materials and Techniques in Art. Oxford: Oxford University Press. p. 380. ISBN 978-0-19531-391-8.
- Srinivasan, Sharada (15 November 1994). "Wootz crucible steel: a newly discovered production site in South India". Papers from the Institute of Archaeology. 5: 49–59. doi:10.5334/pia.60.
- Coghlan, Herbert Henery (1977). Notes on prehistoric and early iron in the Old World (2nd ed.). Pitt Rivers Museum. pp. 99–100.
- Sasisekharan, B. (1999). "Technology of Iron and Steel in Kodumanal" (PDF). Indian Journal of History of Science. 34 (4). Archived from the original (PDF) on 24 July 2015.
- Davidson, Hilda Roderick Ellis (1998). The Sword in Anglo-Saxon England: Its Archaeology and Literature. Boydell & Brewer Ltd. p. 20. ISBN 978-0-85115-716-0.
- Burton, Sir Richard Francis (1884). The Book of the Sword. London: Chatto & Windus. p. 111.
- Needham, Joseph (1 April 1971). Science and Civilisation in China: Volume 4, Physics and Physical Technology. Cambridge University Press. p. 282. ISBN 978-0-52107-060-7.
- Manning, Charlotte Speir. Ancient and Medieval India. 2. p. 365. ISBN 978-0-543-92943-3.
- Hobbies (April 1963) Vol. 68, No.5, p.45, Chicago: Lightner Publishing Company.
- Mahathevan, Iravatham (24 June 2010). "An epigraphic perspective on the antiquity of Tamil". The Hindu. The Hindu Group. Retrieved 31 October 2010.
- Ragupathy, P. (28 June 2010). "Tissamaharama potsherd evidences ordinary early Tamils among population". Tamilnet. Retrieved 31 October 2010.
- "Dinithi" (PDF). Sri Lanka Archaeology. 1 (4). February 2012.[permanent dead link]
- Pande, Girija; af Geijerstam, Jan (2002). Tradition and innovation in the history of iron making: an Indo-European perspective. Pahar Parikarma. p. 45. ISBN 978-81-86246-19-1.
- Narasimha, Roddam; Srinivasan, J.; Biswas, S. K. (6 December 2003). The Dynamics of Technology: Creation and Diffusion of Skills and Knowledge. SAGE Publications. p. 135. ISBN 978-0-7619-9670-5.
- Michael Faraday, as quoted by Day, Peter (1 January 1999). The Philosopher's Tree. Bristol, UK: Institute of Physics Publishing. p. 108. ISBN 978-0-7503-0571-6.
- Balfour, Edward (1885). The Cyclopædia of India and of Eastern and Southern Asia, Commercial Industrial, and Scientific: Products of the Mineral, Vegetable, and Animal Kingdoms, Useful Arts and Manufactures. Bernard Quaritch. p. 1092.
- Jeans, James Stephen (1880). Steel: Its History, Manufacture, Properties and Uses. E. & F.N. Spon. p. 294.
- Smith, Cyril Stanley (1 September 2012). A History of Metallography: The Development of Ideas on the Structure of Metals Before 1890. Literary Licensing, LLC. ISBN 978-1-258-47336-5.
- Pearson, George (1 January 1795). "Experiments and Observations to Investigate the Nature of a Kind of Steel, Manufactured at Bombay, and There Called Wootz: With Remarks on the Properties and Composition of the Different States of Iron". Philosophical Transactions of the Royal Society of London. 85: 322–346. doi:10.1098/rstl.1795.0020. JSTOR 106960.
- Mushet, D. (1 January 1805). "Experiments on Wootz". Philosophical Transactions of the Royal Society of London. 95: 163–175. doi:10.1098/rstl.1805.0010. JSTOR 107164.
- Hadfield, Robert (1932). "A Research on Faraday's "Steel and Alloys". Philosophical Transactions of the Royal Society of London. 230 (681–693): 221–292. doi:10.1098/rsta.1932.0007. JSTOR 91231.
- Verhoeven, Pendray & Dauksch 1998
- Sanderson, Katharine (15 November 2006). "Sharpest cut from nanotube sword". Nature. doi:10.1038/news061113-11.
- Reibold, Marianne; Paufler, Peter; Levin, Aleksandr A.; Kochmann, Werner; Pätzke, Nora; Meyer, Dirk C. (2009). Discovery of Nanotubes in Ancient Damascus Steel. Physics and Engineering of New Materials. Springer Proceedings in Physics. 127. Springer. pp. 305–310. doi:10.1007/978-3-540-88201-5_35. ISBN 978-3-540-88200-8.
- Sherby, Oleg; Wadsworth, Jeffrey (23 November 2001). "Ancient blacksmiths, the Iron Age, Damascus steels, and modem metallurgy". Journal of Materials Processing Technology. 117 (3): 347–353. doi:10.1016/S0924-0136(01)00794-4.
- Srinivasan, Sharada (1994). "Wootz crucible steel: a newly discovered production site in South India". Papers from the Institute of Archaeology. 5: 49–59. doi:10.5334/pia.60.
- Srinivasan, S.; Griffiths, D. "South Indian wootz: evidence for high-carbon steel from crucibles from a newly identified site and preliminary comparisons with related finds". Material Issues in Art and Archaeology. 462.
- Hansson, Staffan (2002). Den skapande människan [The creative mind] (in Swedish). Lund, Sweden: Studentlitteratur AB. p. 81. ISBN 978-9-14402-148-5.
- urukku - from the Tamil Lexicon, University of Madras[permanent dead link]
- "Special Issue: History and Characteristics of Wootz Steel in India and Abroad". Indian Journal of History of Science. 42 (3). September 2007.
- Srinivasan, Sharada; Ranganathan, Srinivasan (2004). India's Legendary Wootz Steel: an advanced material of the ancient world. Bangalore: National Institute of Advanced Studies and Indian Institute of Science.
- Verhoeven, J. D. (January 2001). "The Mystery of Damascus Blades". Scientific American. 284 (1): 74–79. doi:10.1038/scientificamerican0101-74. JSTOR 26059015.
- Verhoeven, J.D.; Pendray, A.H.; Dauksch, W.E. (1998). "The key role of impurities in ancient Damascus steel blades". JOM. 50 (9): 58–64. doi:10.1007/s11837-998-0419-y.
- Verhoeven, J.D.; Pendray, A.H.; Dauksch, W.E. (September 2004). "The continuing study of damascus steel: Bars from the alwar armory". JOM. 56 (9): 17–20. doi:10.1007/s11837-004-0193-4.
- Verhoeven, J.D. (2007). "Pattern Formation in Wootz Damascus Steel Swords and Blades" (PDF). Indian Journal of History of Science. 42 (4): 559–574.
- Wootz Militaria
- Provos, Niels (3 May 2013). Wootz Ep 4: Making Wootz Steel. YouTube.
- Loades, Mike; Pendray, Al (21 November 2017). The Secrets of Wootz Damascus Steel. YouTube.
- US 5185044, Verhoeven, J.D. & Pendray, A.H., "Method of making "Damascus" blades", published 9 February 1993