Light field camera

  (Redirected from Plenoptic camera)

A light field camera, also known as a plenoptic camera, is a camera that captures information about the light field emanating from a scene; that is, the intensity of light in a scene, and also the precise direction that the light rays are traveling in space. This contrasts with conventional cameras, which record only light intensity.

Lytro Illum 2nd generation light field camera
Front and back of a Lytro, the first consumer light field camera, showing the front lens and LCD touchscreen

One type uses an array of micro-lenses placed in front of an otherwise conventional image sensor to sense intensity, color, and directional information. Multi-camera arrays are another type. Holograms are a type of film-based light field image.

HistoryEdit

Early researchEdit

The first light field camera was proposed by Gabriel Lippmann in 1908. He called his concept "integral photography". Lippmann's experimental results included crude integral photographs made by using a plastic sheet embossed with a regular array of microlenses, or by partially embedding small glass beads, closely packed in a random pattern, into the surface of the photographic emulsion.

In 1992, Adelson and Wang proposed a design that reduced the correspondence problem in stereo matching.[1] To achieve this, an array of microlenses is placed at the focal plane of the camera main lens. The image sensor is positioned slightly behind the microlenses. Using such images, the displacement of image parts that are not in focus can be analyzed and depth information can be extracted.

Standard plenoptic cameraEdit

 
This demonstrates the capability of changing the focal distance and depth of field after a photo is taken - Near focus (top), Far focus (middle), Full depth of field (bottom) - using the Lytro Illum light field camera software

The "standard plenoptic camera" is a mathematical model used by researchers to compare designs. By definition it has microlenses placed one focal length away from the image plane of a sensor.[2][3][4] Research has shown that its maximum baseline is confined to the main lens entrance pupil size which is small relative to stereoscopic setups.[1][5] This implies that the "standard plenoptic camera" may be intended for close range applications as it exhibits increased depth resolution at distances that can be metrically predicted based on the camera's parameters.[6]

Focused plenoptic cameraEdit

In 2004, a team at Stanford University Computer Graphics Laboratory used a 16-megapixel camera to demonstrate that pictures can be refocused after they are taken. The system used a 90,000-microlens array, yielding a resolution of 90 kilopixels.[2]

Lumsdaine and Georgiev described a design in which the microlens array can be positioned before or behind the focal plane of the main lens. This modification samples the light field in a way that trades angular resolution for higher spatial resolution. With this design, images can be refocused with a much higher spatial resolution than images from a standard plenoptic camera. However, the lower angular resolution can introduce aliasing artifacts.

Coded aperture cameraEdit

A design that used a low-cost printed film mask instead of a microlens array was proposed in 2007.[7] This design reduces the chromatic aberrations and loss of boundary pixels seen in microlens arrays, and allows greater spatial resolution. However the mask-based design reduces the amount of light that reaches the image sensor, reducing brightness.

LytroEdit

Lytro's light field sensor uses an array of micro-lenses placed in front of an otherwise conventional image sensor; to sense intensity, color, and directional information.[8] Software then uses this data to create displayable 2D or 3D images.[9] Lytro trades maximum 2D resolution, at a given distance, for enhanced resolution at other distances. Users can convert the Lytro camera's proprietary image into a regular 2D image file, at any desired focal distance. The maximum Illum 2D resolution is 2450 × 1634 (4.0 megapixels), The 3D light field resolution is 40 "megarays".[10] It has a maximum 2D resolution of 1080 × 1080 pixels (roughly 1.2 megapixels),[11]

FeaturesEdit

Features include:

  • Variable depth of field and "refocusing": Lytro's "Focus Spread" feature allows the depth of field (depth of focus) of a 2 dimensional representation of a Lytro image to be adjusted after a picture has been taken.[12] Instead of setting the focus at a particular distance, "Focus Spread" allows more of a 2D image to be in focus. In some cases this may be the entire 2D image field. Users also are able to "refocus" 2D images at particular distances for artistic effects. The Illum allows the "refocus-able" and "Focus Spreadable" range to be selected using the optical focus and zoom rings on the lens. The Illum also features "focus bracketing" to extend the refocusable range by capturing 3 or 5 consecutive images at different depths.[13]
  • Speed: Because there is less need to focus the lens before taking a picture, a light field camera can capture images more quickly than conventional point-and-shoot digital cameras.[14] This is an advantage in sports photography, for example, where many pictures are lost because the cameras auto-focus system cannot precisely track a fast moving subject.
  • Low-light sensitivity: The ability to adjust focus in post-processing allows the use of larger apertures than are feasible on conventional cameras, thus enabling photography in low-light environments.[14][15]
  • 3D images: Since a plenoptic camera records depth information, stereo images can be constructed in software from a single plenoptic image capture.[16][17]

ManufacturersEdit

Consumer productsEdit

Lytro was founded by Stanford University Computer Graphics Laboratory alumnus Ren Ng to commercialize the light field camera he developed as a graduate student.[18] Lytro ceased operations in March 2018.

Raytrix has offered several models of plenoptic cameras for industrial and scientific applications since 2010, with field of view starting from 1 megapixel.[19][20]

d'Optron and Rebellion Photonics offer plenoptic cameras, specializing in microscopy and gas leak detection, respectively.

In November 2021 the German based company K|Lens[21] announced the first light field lens available for any standard lens mount on Kickstarter.

Other camerasEdit

Pelican Imaging has thin multi-camera array systems intended for consumer electronics. Pelican's systems use from 4 to 16 closely spaced micro-cameras instead of a micro-lens array image sensor.[22] Nokia invested in Pelican Imaging to produce a plenoptic camera system with 16-lens array that was expected to be implemented in Nokia smartphones in 2014.[23] Pelican moved to designing supplementary cameras that add depth-sensing capabilities to a device's main camera, rather than stand-alone array cameras.[24]

The Adobe light field camera is a prototype 100-megapixel camera that takes a three-dimensional photo of the scene in focus using 19 uniquely configured lenses. Each lens takes a 5.2-megapixel photo of the scene. Each image can be focused later in any way.[25]

CAFADIS is a plenoptic camera developed by University of La Laguna (Spain).[26] CAFADIS stands (in Spanish) for phase-distance camera, since it can be used for distance and optical wavefront estimation. From a single shot it can produce images focused at different distances, depth maps, all-in-focus images and stereo pairs. A similar optical design can be used in adaptive optics in astrophysics.

Mitsubishi Electric Research Laboratories's (MERL) light field camera[7] is based on the principle of optical heterodyning and uses a printed film (mask) placed close to the sensor. Any hand-held camera can be converted into a light field camera using this technology by simply inserting a low-cost film on top of the sensor.[27] A mask-based design avoids the problem of loss of resolution, since a high-resolution photo can be generated for the focused parts of the scene.

Stanford University Computer Graphics Laboratory developed a prototype light field microscope using a microlens array similar to the one used in their light field camera. The prototype is built around a Nikon Eclipse transmitted light microscope/wide-field fluorescence microscope and standard CCD cameras. Light field capture is obtained by a module containing a microlens array and other optical components placed in the light path between the objective lens and camera, with the final multifocused image rendered using deconvolution.[28][29][30]

A later prototype added a light field illumination system consisting of a video projector (allowing computational control of illumination) and a second microlens array in the illumination light path of the microscope. The addition of a light field illumination system both allowed for additional types of illumination (such as oblique illumination and quasi-dark-field) and correction for optical aberrations.[29]

Amateur versionsEdit

The modification of standard digital cameras requires little more than suitable sheets of micro-lens material, hence a number of hobbyists have produced cameras whose images can be processed to give either selective depth of field or direction information.[31]

ApplicationsEdit

In a 2017 study, researchers observed that incorporation of light field photographed images into an online anatomy module did not result in better learning outcomes compared to an identical module with traditional photographs of dissected cadavers.[32]

Plenoptic cameras are good for imaging fast moving objects that outstrip autofocus capabilities, and for imaging objects where autofocus is not practical such as with security cameras.[33] A recording from a security camera based upon plenoptic technology could be used to produce an accurate 3D model of a subject.[34]

See alsoEdit

ReferencesEdit

  1. ^ a b Adelson, E. H.; Wang, J. Y. A. (1992). "Single Lens Stereo with Plenoptic Camera". IEEE Transactions on Pattern Analysis and Machine Intelligence. 14 (2): 99–106. CiteSeerX 10.1.1.53.7845. doi:10.1109/34.121783.
  2. ^ a b "Light Field Photography with a Hand-Held Plenoptic Camera". graphics.stanford.edu.
  3. ^ Lumsdaine, A., Georgiev, T., The Focused Plenoptic Camera, ICCP, April 2009.
  4. ^ Hahne, C.; Aggoun, A.; Velisavljevic, V.; Fiebig, S.; Pesch, M. (2016). "Refocusing distance of a standard plenoptic camera". Optics Express. 24 (19): 21521–21540. Bibcode:2016OExpr..2421521H. doi:10.1364/oe.24.021521. hdl:10547/622011. PMID 27661891.
  5. ^ Hahne, C.; Aggoun, A.; Velisavljevic, V.; Fiebig, S.; Pesch, M. (2017). "Baseline and Triangulation Geometry in a Standard Plenoptic Camera" (PDF). Int. J. Comput. Vis.
  6. ^ "Light field geometry estimator".
  7. ^ a b Ashok Veeraraghavan, Ramesh Raskar, Amit Agrawal, Ankit Mohan and Jack Tumblin. Dappled Photography: Mask Enhanced Cameras for Heterodyned Light Fields and Coded Aperture Refocusing. ACM Transactions on Graphics, Vol. 26, Issue 3, July 2007.
  8. ^ Coldewey, Devin. "Doubts About Lytro's "Focus Later" Camera". TechCrunch. Retrieved 19 August 2011.
  9. ^ Lars Rehm, DP Review. "CES 2012: Lytro Photowalk." Jan 13, 2012. Retrieved Apr 20, 2012
  10. ^ "Lytro Illum 40 Megaray Light Field Camera". Digital Photography Review. Retrieved 2014-10-19.
  11. ^ Goldman, Joshua (26 October 2011). "Lytro camera: 5 things to know before you buy". CNET Editor. CNET. Retrieved 21 November 2018.
  12. ^ "Lytro software update introduces Focus Spread feature". DPREVIEW. Retrieved 25 March 2015.
  13. ^ "Depth Composition Features". Lytro Illum manual. Lytro. Retrieved October 19, 2014.
  14. ^ a b Fried, Ina. "Meet the Stealthy Start-Up That Aims to Sharpen Focus of Entire Camera Industry". All Things Digital. Retrieved 24 June 2011.
  15. ^ Geron, Tomio (21 June 2011). "Shoot First, Focus Later With Lytro's New Camera Tech". Forbes. Retrieved 19 August 2011.
  16. ^ José Manuel Rodríguez-Ramos (1 April 2011). "3D imaging and wavefront sensing with a plenoptic objective". SPIE.
  17. ^ "Plenoptic lens arrays signal future?". TVB Europe. 23 September 2011. Archived from the original on 18 December 2012.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  18. ^ "Lytro website". Archived from the original on 2011-11-04. Retrieved 2011-10-30.
  19. ^ "One Camera With 40,000 Lenses Helps Prevent Blurry Images". March 18, 2019.
  20. ^ "The First Plenoptic Camera on the Market | PetaPixel". petapixel.com.
  21. ^ "KLens company".
  22. ^ "Pelicanimaging.com". www77.pelicanimaging.com.
  23. ^ "Pelican Imaging's 16-lens array camera coming to smartphones next year". May 2, 2013.
  24. ^ Koifman, Vladimir (2015-07-25). "Pelican Imaging Layoffs?". Image Sensors World. Archived from the original on 26 November 2019. Retrieved 2015-11-17.
  25. ^ Keats, Jonathon; Holland, Kris; McLeod, Gary. "PopSci's How It Works – 100 Megapixel Camera". PopSci.com. Popular Science. Archived from the original (Adobe Flash) on 2008-01-17. Retrieved 26 July 2009.
  26. ^ "CAFADIS - University of la Laguna". Archived from the original on 26 November 2019.
  27. ^ Amit Agrawal (2013-12-31). "Lytro vs Mask Based Light Field Camera". Archived from the original on 2013-12-31.
  28. ^ Levoy, M; Ng, R; Adams, A; Footer, M; Horowitz, M (2006). "Light Field Microscopy". ACM Transactions on Graphics. 25 (3): 924–93. doi:10.1145/1141911.1141976.
  29. ^ a b Levoy, M; Zhang, Z; McDowall, I (2009). "Recording and controlling the 4D light field in a microscope". Journal of Microscopy. 235 (2): 144–162. CiteSeerX 10.1.1.163.269. doi:10.1111/j.1365-2818.2009.03195.x. PMID 19659909. S2CID 13194109.
  30. ^ "Stanford Light Field Microscope Project". www.graphics.stanford.edu.
  31. ^ "Lightfield Camera". cameramaker.se.
  32. ^ Pascoe, Michael A.; Lee, Lisa M.J. (September 2017). "Incorporation of Light Field Photography into an Online Anatomy Resource Does Not Influence Student Quiz Performance or Perceptions of Usability". Medical Science Educator. 27 (3): 465–474. doi:10.1007/s40670-017-0410-8. ISSN 2156-8650. S2CID 148803076.
  33. ^ "Polydioptric Camera Design - VideoGeometry :: Home Page of Jan Neumann". sites.google.com.
  34. ^ Strehlow, Anne (November 3, 2005). "Computer scientists create a 'light field camera' that banishes fuzzy photos". Stanford University.

External linksEdit