This article needs attention from an expert in computing. See the talk page for details. (June 2019)
In computer operating systems, memory paging is a memory management scheme by which a computer stores and retrieves data from secondary storage[a] for use in main memory. In this scheme, the operating system retrieves data from secondary storage in same-size blocks called pages. Paging is an important part of virtual memory implementations in modern operating systems, using secondary storage to let programs exceed the size of available physical memory.
For simplicity, main memory is called "RAM" (an acronym of random-access memory) and secondary storage is called "disk" (a shorthand for hard disk drive, drum memory or solid-state drive, etc.), but as with many aspects of computing, the concepts are independent of the technology used.
Depending on the memory model, paged memory functionality is usually hardwired into a CPU/MCU by using a Memory Management Unit (MMU) or Memory Protection Unit (MPU) and separately enabled by privileged system code in the operating system's kernel. In CPUs implementing the x86 instruction set architecture (ISA) for instance, the memory paging is enabled via the CR0 control register.
In the 1960s, swapping was an early virtual memory technique. An entire program or entire segment would be "swapped out" (or "rolled out") from RAM to disk or drum, and another one would be swapped in (or rolled in). A swapped-out program would be current but its execution would be suspended while its RAM was in use by another program; a program with a swapped-out segment could continue running until it needed that segment, at which point it would be suspended until the segment was swapped in.
A program might include multiple overlays that occupy the same memory at different times. Overlays are not a method of paging RAM to disk but merely of minimizing the program's RAM use. Subsequent architectures used memory segmentation, and individual program segments became the units exchanged between disk and RAM. A segment was the program's entire code segment or data segment, or sometimes other large data structures. These segments had to be contiguous when resident in RAM, requiring additional computation and movement to remedy fragmentation.
Ferranti's Atlas, and the Atlas Supervisor developed at the University of Manchester, (1962), was the first system to implement memory paging. Subsequent early machines, and their operating systems, supporting paging include the IBM M44/44X and its MOS operating system (1964),, the SDS 940 and the Berkeley Timesharing System (1966), a modified IBM System/360 Model 40 and the CP-40 operating system (1967), the IBM System/360 Model 67 and operating systems such as TSS/360 and CP/CMS (1967), the RCA 70/46 and the Time Sharing Operating System (1967), the GE 645 and Multics (1969), and the PDP-10 with added BBN-designed paging hardware and the TENEX operating system (1969).
Those machines, and subsequent machines supporting memory paging, use either a set of page address registers or an in-memory page table to allow the processor to operate on arbitrary pages anywhere in RAM as a seemingly contiguous logical address space. These pages became the units exchanged between disk and RAM.
When a process tries to reference a page not currently present in RAM, the processor treats this invalid memory reference as a page fault and transfers control from the program to the operating system. The operating system must:
- Determine the location of the data on disk.
- Obtain an empty page frame in RAM to use as a container for the data.
- Load the requested data into the available page frame.
- Update the page table to refer to the new page frame.
- Return control to the program, transparently retrying the instruction that caused the page fault.
When all page frames are in use, the operating system must select a page frame to reuse for the page the program now needs. If the evicted page frame was dynamically allocated by a program to hold data, or if a program modified it since it was read into RAM (in other words, if it has become "dirty"), it must be written out to disk before being freed. If a program later references the evicted page, another page fault occurs and the page must be read back into RAM.
The method the operating system uses to select the page frame to reuse, which is its page replacement algorithm, is important to efficiency. The operating system predicts the page frame least likely to be needed soon, often through the least recently used (LRU) algorithm or an algorithm based on the program's working set. To further increase responsiveness, paging systems may predict which pages will be needed soon, preemptively loading them into RAM before a program references them.
Page replacement techniquesEdit
- Demand paging
- When pure demand paging is used, pages are loaded only when they are referenced. A program from a memory mapped file begins execution with none of its pages in RAM. As the program commits page faults, the operating system copies the needed pages from a file, e.g., memory-mapped file, paging file, or a swap partition containing the page data into RAM.
- Anticipatory paging
- This technique, sometimes also called swap prefetch, predicts which pages will be referenced soon, to minimize future page faults. For example, after reading a page to service a page fault, the operating system may also read the next few pages even though they are not yet needed (a prediction using locality of reference). If a program ends, the operating system may delay freeing its pages, in case the user runs the same program again.
- Free page queue, stealing, and reclamation
- The free page queue is a list of page frames that are available for assignment. Preventing this queue from being empty minimizes the computing necessary to service a page fault. Some operating systems periodically look for pages that have not been recently referenced and then free the page frame and add it to the free page queue, a process known as "page stealing". Some operating systems[b] support page reclamation; if a program commits a page fault by referencing a page that was stolen, the operating system detects this and restores the page frame without having to read the contents back into RAM.
- The operating system may periodically pre-clean dirty pages: write modified pages back to disk even though they might be further modified. This minimizes the amount of cleaning needed to obtain new page frames at the moment a new program starts or a new data file is opened, and improves responsiveness. (Unix operating systems periodically use sync to pre-clean all dirty pages; Windows operating systems use "modified page writer" threads.)
After completing initialization, most programs operate on a small number of code and data pages compared to the total memory the program requires. The pages most frequently accessed are called the working set.
When the working set is a small percentage of the system's total number of pages, virtual memory systems work most efficiently and an insignificant amount of computing is spent resolving page faults. As the working set grows, resolving page faults remains manageable until the growth reaches a critical point. Then faults go up dramatically and the time spent resolving them overwhelms time spent on the computing the program was written to do. This condition is referred to as thrashing. Thrashing occurs on a program that works with huge data structures, as its large working set causes continual page faults that drastically slow down the system. Satisfying page faults may require freeing pages that will soon have to be re-read from disk. "Thrashing" is also used in contexts other than virtual memory systems; for example, to describe cache issues in computing or silly window syndrome in networking.
A worst case might occur on VAX processors. A single MOVL crossing a page boundary could have a source operand using a displacement deferred addressing mode, where the longword containing the operand address crosses a page boundary, and a destination operand using a displacement deferred addressing mode, where the longword containing the operand address crosses a page boundary, and the source and destination could both cross page boundaries. This single instruction references ten pages; if not all are in RAM, each will cause a page fault. As each fault occurs the operating system needs to go through the extensive memory management routines perhaps causing multiple I/Os which might include writing other process pages to disk and reading pages of the active process from disk. If the operating system could not allocate ten pages to this program, then remedying the page fault would discard another page the instruction needs, and any restart of the instruction would fault again.
To decrease excessive paging and resolve thrashing problems, a user can increase the number of pages available per program, either by running fewer programs concurrently or increasing the amount of RAM in the computer.
In multi-programming or in a multi-user environment, many users may execute the same program, written so that its code and data are in separate pages. To minimize RAM use, all users share a single copy of the program. Each process's page table is set up so that the pages that address code point to the single shared copy, while the pages that address data point to different physical pages for each process.
Different programs might also use the same libraries. To save space, only one copy of the shared library is loaded into physical memory. Programs which use the same library have virtual addresses that map to the same pages (which contain the library's code and data). When programs want to modify the library's code, they use copy-on-write, so memory is only allocated when needed.
Shared memory is an efficient way of communication between programs. Programs can share pages in memory, and then write and read to exchange data.
The first computer to support paging was the supercomputer Atlas, jointly developed by Ferranti, the University of Manchester and Plessey in 1963. The machine had an associative (content-addressable) memory with one entry for each 512 word page. The Supervisor handled non-equivalence interruptions[c] and managed the transfer of pages between core and drum in order to provide a one-level store to programs.
Windows 3.x and Windows 9xEdit
Paging has been a feature of Microsoft Windows since Windows 3.0 in 1990. Windows 3.x creates a hidden file named
WIN386.SWP for use as a swap file. It is generally found in the root directory, but it may appear elsewhere (typically in the WINDOWS directory). Its size depends on how much swap space the system has (a setting selected by the user under Control Panel → Enhanced under "Virtual Memory"). If the user moves or deletes this file, a blue screen will appear the next time Windows is started, with the error message "The permanent swap file is corrupt". The user will be prompted to choose whether or not to delete the file (whether or not it exists).
Windows 95, Windows 98 and Windows Me use a similar file, and the settings for it are located under Control Panel → System → Performance tab → Virtual Memory. Windows automatically sets the size of the page file to start at 1.5× the size of physical memory, and expand up to 3× physical memory if necessary. If a user runs memory-intensive applications on a system with low physical memory, it is preferable to manually set these sizes to a value higher than default.
The file used for paging in the Windows NT family is
pagefile.sys. The default location of the page file is in the root directory of the partition where Windows is installed. Windows can be configured to use free space on any available drives for page files. It is required, however, for the boot partition (i.e., the drive containing the Windows directory) to have a page file on it if the system is configured to write either kernel or full memory dumps after a Blue Screen of Death. Windows uses the paging file as temporary storage for the memory dump. When the system is rebooted, Windows copies the memory dump from the page file to a separate file and frees the space that was used in the page file.
This section needs to be updated.(July 2014)
In the default configuration of Windows, the page file is allowed to expand beyond its initial allocation when necessary. If this happens gradually, it can become heavily fragmented which can potentially cause performance problems. The common advice given to avoid this is to set a single "locked" page file size so that Windows will not expand it. However, the page file only expands when it has been filled, which, in its default configuration, is 150% of the total amount of physical memory. Thus the total demand for page file-backed virtual memory must exceed 250% of the computer's physical memory before the page file will expand.
The fragmentation of the page file that occurs when it expands is temporary. As soon as the expanded regions are no longer in use (at the next reboot, if not sooner) the additional disk space allocations are freed and the page file is back to its original state.
Locking a page file size can be problematic if a Windows application requests more memory than the total size of physical memory and the page file, leading to failed requests to allocate memory that may cause applications and system processes to fail. Also, the page file is rarely read or written in sequential order, so the performance advantage of having a completely sequential page file is minimal. However, a large page file generally allows the use of memory-heavy applications, with no penalties besides using more disk space. While a fragmented page file may not be an issue by itself, fragmentation of a variable size page file will over time create several fragmented blocks on the drive, causing other files to become fragmented. For this reason, a fixed-size contiguous page file is better, providing that the size allocated is large enough to accommodate the needs of all applications.
The required disk space may be easily allocated on systems with more recent specifications (i.e. a system with 3 GB of memory having a 6 GB fixed-size page file on a 750 GB disk drive, or a system with 6 GB of memory and a 16 GB fixed-size page file and 2 TB of disk space). In both examples, the system uses about 0.8% of the disk space with the page file pre-extended to its maximum.
Defragmenting the page file is also occasionally recommended to improve performance when a Windows system is chronically using much more memory than its total physical memory. This view ignores the fact that, aside from the temporary results of expansion, the page file does not become fragmented over time. In general, performance concerns related to page file access are much more effectively dealt with by adding more physical memory.
Unix and Unix-like systemsEdit
Unix systems, and other Unix-like operating systems, use the term "swap" to describe the act of substituting disk space for RAM when physical RAM is full. In some of those systems, it is common to dedicate an entire partition of a hard disk to swapping. These partitions are called swap partitions. Many systems have an entire hard drive dedicated to swapping, separate from the data drive(s), containing only a swap partition. A hard drive dedicated to swapping is called a "swap drive" or a "scratch drive" or a "scratch disk". Some of those systems only support swapping to a swap partition; others also support swapping to files.
The Linux kernel supports a virtually unlimited number of swap backends (devices or files), and also supports assignment of backend priorities. When the kernel swaps pages out of physical memory, it uses the highest-priority backend with available free space. If multiple swap backends are assigned the same priority, they are used in a round-robin fashion (which is somewhat similar to RAID 0 storage layouts), providing improved performance as long as the underlying devices can be efficiently accessed in parallel.
Swap files and partitionsEdit
From the end-user perspective, swap files in versions 2.6.x and later of the Linux kernel are virtually as fast as swap partitions; the limitation is that swap files should be contiguously allocated on their underlying file systems. To increase performance of swap files, the kernel keeps a map of where they are placed on underlying devices and accesses them directly, thus bypassing the cache and avoiding filesystem overhead. When residing on HDDs, which are rotational magnetic media devices, one benefit of using swap partitions is the ability to place them on contiguous HDD areas that provide higher data throughput or faster seek time. However, the administrative flexibility of swap files can outweigh certain advantages of swap partitions. For example, a swap file can be placed on any mounted file system, can be set to any desired size, and can be added or changed as needed. Swap partitions are not as flexible; they cannot be enlarged without using partitioning or volume management tools, which introduce various complexities and potential downtimes.
Swappiness is a Linux kernel parameter that controls the relative weight given to swapping out of runtime memory, as opposed to dropping pages from the system page cache, whenever a memory allocation request cannot be met from free memory. Swappiness can be set to a value from 0 to 200. A low value causes the kernel to prefer to evict pages from the page cache while a higher value causes the kernel to prefer to swap out "cold" memory pages. The default value is
60; setting it higher can cause high latency if cold pages need to be swapped back in (when interacting with a program that had been idle for example), while setting it lower (even 0) may cause high latency when files that had been evicted from the cache need to be read again, but will make interactive programs more responsive as they will be less likely to need to swap back cold pages. Swapping can also slow down HDDs further because it involves a lot of random writes, while SSDs do not have this problem. Certainly the default values work well in most workloads, but desktops and interactive systems for any expected task may want to lower the setting while batch processing and less interactive systems may want to increase it.
When the system memory is highly insufficient for the current tasks and a large portion of memory activity goes through a slow swap, the system can become practically unable to execute any task, even if the CPU is idle. When every process is waiting on the swap, the system is considered to be in swap death.
The original description of the "swapping to death" problem relates to the X server. If code or data used by the X server to respond to a keystroke is not in main memory, then if the user enters a keystroke, the server will take one or more page faults, requiring those pages to read from swap before the keystroke can be processed, slowing the response to it. If those pages don't remain in memory, they will have to be faulted in again to handle the next keystroke, making the system practically unresponsive even if it's actually executing other tasks normally.
AmigaOS 4.0 introduced a new system for allocating RAM and defragmenting physical memory. It still uses flat shared address space that cannot be defragmented. It is based on slab allocation method and paging memory that allows swapping. Paging was implemented in AmigaOS 4.1 but may lock up system if all physical memory is used up. Swap memory could be activated and deactivated any moment allowing the user to choose to use only physical RAM.
The backing store for a virtual memory operating system is typically many orders of magnitude slower than RAM. Additionally, using mechanical storage devices introduces delay, several milliseconds for a hard disk. Therefore, it is desirable to reduce or eliminate swapping, where practical. Some operating systems offer settings to influence the kernel's decisions.
- Linux offers the
/proc/sys/vm/swappinessparameter, which changes the balance between swapping out runtime memory, as opposed to dropping pages from the system page cache.
- Windows 2000, XP, and Vista offer the
DisablePagingExecutiveregistry setting, which controls whether kernel-mode code and data can be eligible for paging out.
- Mainframe computers frequently used head-per-track disk drives or drums for page and swap storage to eliminate seek time, and several technologies to have multiple concurrent requests to the same device in order to reduce rotational latency.
- Flash memory has a finite number of erase-write cycles (see limitations of flash memory), and the smallest amount of data that can be erased at once might be very large (128 KiB for an Intel X25-M SSD ), seldom coinciding with pagesize. Therefore, flash memory may wear out quickly if used as swap space under tight memory conditions. On the attractive side, flash memory is practically delayless compared to hard disks, and not volatile as RAM chips. Schemes like ReadyBoost and Intel Turbo Memory are made to exploit these characteristics.
Swap space sizeEdit
In some older virtual memory operating systems, space in swap backing store is reserved when programs allocate memory for runtime data. Operating system vendors typically issue guidelines about how much swap space should be allocated.
Addressing limits on 32-bit hardwareEdit
Paging is one way of allowing the size of the addresses used by a process, which is the process's "virtual address space" or "logical address space", to be different from the amount of main memory actually installed on a particular computer, which is the physical address space.
Main memory smaller than virtual memoryEdit
In most systems, the size of a process's virtual address space is much larger than the available main memory. For example:
- The address bus that connects the CPU to main memory may be limited. The i386SX CPU's 32-bit internal addresses can address 4 GB, but it has only 24 pins connected to the address bus, limiting installed physical memory to 16 MB. There may be other hardware restrictions on the maximum amount of RAM that can be installed.
- The maximum memory might not be installed because of cost, because the model's standard configuration omits it, or because the buyer did not believe it would be advantageous.
- Sometimes not all internal addresses can be used for memory anyway, because the hardware architecture may reserve large regions for I/O or other features.
Main memory the same size as virtual memoryEdit
A computer with true n-bit addressing may have 2n addressable units of RAM installed. An example is a 32-bit x86 processor with 4 GB and without Physical Address Extension (PAE). In this case, the processor is able to address all the RAM installed and no more.
However, even in this case, paging can be used to create a virtual memory of over 4 GB. For instance, many programs may be running concurrently. Together, they may require more than 4 GB, but not all of it will have to be in RAM at once. A paging system makes efficient decisions on which memory to relegate to secondary storage, leading to the best use of the installed RAM.
Although the processor in this example cannot address RAM beyond 4 GB, the operating system may provide services to programs that envision a larger memory, such as files that can grow beyond the limit of installed RAM. The operating system lets a program manipulate data in the file arbitrarily, using paging to bring parts of the file into RAM when necessary.
Main memory larger than virtual address spaceEdit
A few computers have a main memory larger than the virtual address space of a process, such as the Magic-1, some PDP-11 machines, and some systems using 32-bit x86 processors with Physical Address Extension. This nullifies a significant advantage of paging, since a single process cannot use more main memory than the amount of its virtual address space. Such systems often use paging techniques to obtain secondary benefits:
- The "extra memory" can be used in the page cache to cache frequently used files and metadata, such as directory information, from secondary storage.
- If the processor and operating system support multiple virtual address spaces, the "extra memory" can be used to run more processes. Paging allows the cumulative total of virtual address spaces to exceed physical main memory.
- A process can store data in memory-mapped files on memory-backed file systems, such as the tmpfs file system or file systems on a RAM drive, and map files into and out of the address space as needed.
- A set of processes may still depend upon the enhanced security features page-based isolation may bring to a multitasking environment.
The size of the cumulative total of virtual address spaces is still limited by the amount of secondary storage available.
- Bélády's anomaly
- Demand paging, a "lazy" paging scheme
- Expanded memory
- Memory management
- Memory segmentation
- Page (computer memory)
- Page cache, a disk cache that utilizes virtual memory mechanism
- Page replacement algorithm
- Page table
- Physical memory, a subject of paging
- Virtual memory, an abstraction that paging may create
- Belzer, Jack; Holzman, Albert G.; Kent, Allen, eds. (1981). "Operating systems". Encyclopedia of computer science and technology. Vol. 11. CRC Press. p. 442. ISBN 0-8247-2261-2. Archived from the original on 2017-02-27.
- Cragon, Harvey G. (1996). Memory Systems and Pipelined Processors. Jones and Bartlett Publishers. p. 109. ISBN 0-86720-474-5. Archived from the original on 2017-02-27.
- Belzer, Jack; Holzman, Albert G.; Kent, Allen, eds. (1981). "Virtual memory systems". Encyclopedia of computer science and technology. Vol. 14. CRC Press. p. 32. ISBN 0-8247-2214-0. Archived from the original on 2017-02-27.
- Kilburn, T; Payne, R B; Howarth, D J (1962). "The Atlas Supervisor".
- R. W. O'Neill. Experience using a time sharing multiprogramming system with dynamic address relocation hardware. Proc. AFIPS Computer Conference 30 (Spring Joint Computer Conference, 1967). pp. 611–621. doi:10.1145/1465482.1465581.
- Scientific Data Systems Reference Manual, SDS 940 Computer (PDF). 1966. pp. 8–9.
- Sumner, F. H.; Haley, G.; Chenh, E. C. Y. (1962). "The Central Control Unit of the 'Atlas' Computer". Information Processing 1962. IFIP Congress Proceedings. Vol. Proceedings of IFIP Congress 62. Spartan.
- "The Atlas". University of Manchester: Department of Computer Science. Archived from the original on 2012-07-28.
- "Atlas Architecture". Atlas Computer. Chilton: Atlas Computer Laboratory. Archived from the original on 2012-12-10.
- Kilburn, T.; Payne, R. B.; Howarth, D. J. (December 1961). "The Atlas Supervisor". Computers - Key to Total Systems Control. Conferences Proceedings. Vol. 20, Proceedings of the Eastern Joint Computer Conference Washington, D.C. Macmillan. pp. 279–294. Archived from the original on 2009-12-31.
- Kilburn, T.; Edwards, D. B. G.; Lanigan, M. J.; Sumner, F. H. (April 1962). "One-Level Storage System". IRE Transactions on Electronic Computers. Institute of Radio Engineers (2): 223–235. doi:10.1109/TEC.1962.5219356.
- Tsigkogiannis, Ilias (2006-12-11). "Crash Dump Analysis". driver writing != bus driving. Microsoft. Archived from the original on 2008-10-07. Retrieved 2008-07-22.
- "Windows Sysinternals PageDefrag". Sysinternals. Microsoft. 2006-11-01. Archived from the original on 2010-12-25. Retrieved 2010-12-20.
- Both, David (2020-03-27). "An introduction to swap space on Linux systems". Opensource.com. Retrieved 2021-12-08.
- "swapon(2) – Linux man page". Linux.Die.net. Archived from the original on 2014-02-28. Retrieved 2014-09-08.
- ""Jesper Juhl": Re: How to send a break? - dump from frozen 64bit linux". LKML. 2006-05-29. Archived from the original on 2010-11-24. Retrieved 2010-10-28.
- "Andrew Morton: Re: Swap partition vs swap file". LKML. Archived from the original on 2010-11-24. Retrieved 2010-10-28.
- "The Linux Kernel Documentation for /proc/sys/vm/".
- Andrews, Jeremy (2004-04-29). "Linux: Tuning Swappiness". kerneltrap.org. Archived from the original on 2013-05-24. Retrieved 2018-01-03.
- Rik van Riel (1998-05-20). "swap death (as in 2.1.91) and page tables". Archived from the original on 2017-12-29.
- Kyle Rankin (2012). DevOps Troubleshooting: Linux Server Best Practices. Addison-Wesley. p. 159. ISBN 978-0-13-303550-6. Archived from the original on 2017-12-29.
- Andries Brouwer. "The Linux kernel: Memory". Archived from the original on 2017-08-13.
- Red Hat. "Capacity Tuning". Archived from the original on 2017-07-23.
- "Memory overcommit settings". 2014-02-16. Archived from the original on 2017-05-31.
- Peter MacDonald (1993-02-10). "swapping to death". Archived from the original on 2017-03-28.
- John Siracusa (2001-10-15). "Mac OS X 10.1". Ars Technica. Archived from the original on 2008-09-05. Retrieved 2008-07-23.
- AmigaOS Core Developer (2011-01-08). "Re: Swap issue also on Update 4 ?". Hyperion Entertainment. Archived from the original on 2013-04-12. Retrieved 2011-01-08.
- E.g., Rotational Position Sensing on a Block Multiplexor channel
- "Aligning filesystems to an SSD's erase block size | Thoughts by Ted". Thunk.org. 2009-02-20. Archived from the original on 2010-11-13. Retrieved 2010-10-28.
- Bill Buzbee. "Magic-1 Minix Demand Paging Design". Archived from the original on 2013-06-05. Retrieved 2013-12-09.
- Swap Facts and questions by Ubuntu Documentation
- Windows Server - Moving Pagefile to another partition or disk by David Nudelman
- How Virtual Memory Works from HowStuffWorks.com (in fact explains only swapping concept, and not virtual memory concept)
- Linux swap space management (outdated, as the author admits)
- Guide On Optimizing Virtual Memory Speed (outdated, and contradicts section 1.4 of this wiki page, and (at least) references 8, 9, and 11.)
- Virtual Memory Page Replacement Algorithms
- Windows XP: How to manually change the size of the virtual memory paging file
- Windows XP: Factors that may deplete the supply of paged pool memory
- SwapFs driver that can be used to save the paging file of Windows on a swap partition of Linux