Universally unique identifier(Redirected from Globally Unique Identifier)
A universally unique identifier (UUID) is a 128-bit number used to identify information in computer systems. The term globally unique identifier (GUID) is also used.
When generated according to the standard methods, UUIDs are for practical purposes unique, without depending for their uniqueness on a central registration authority or coordination between the parties generating them, unlike most other numbering schemes. While the probability that a UUID will be duplicated is not zero, it is close enough to zero to be negligible.
Thus, anyone can create a UUID and use it to identify something with near certainty that the identifier does not duplicate one that has already been, or will be, created to identify something else. Information labeled with UUIDs by independent parties can therefore be later combined into a single database, or transmitted on the same channel, without needing to resolve conflicts between identifiers.
Adoption of UUIDs and GUIDs is widespread, with many computing platforms providing support for generating them, and for parsing their textual representation.
UUIDs were originally used in the Apollo Network Computing System (NCS) and later in the Open Software Foundation's (OSF) Distributed Computing Environment (DCE). The initial design of DCE UUIDs was based on the NCS UUIDs, whose design was in turn inspired by the (64-bit) unique identifiers defined and used pervasively in Domain/OS, an operating system also designed by Apollo Computer. Later, the Microsoft Windows platforms adopted the DCE design as globally unique identifiers (GUIDs). RFC 4122 registered a URN namespace for UUIDs, and recapitulated the earlier specifications, with the same technical content. By the time RFC 4122 was published as a proposed IETF standard, the ITU had also standardized UUIDs, based on the previous standards and early versions of RFC 4122.
UUIDs are documented as part of ISO/IEC 11578:1996 "Information technology – Open Systems Interconnection – Remote Procedure Call (RPC)" and more recently in ITU-T Rec. X.667 | ISO/IEC 9834-8:2005.
In its canonical textual representation, the sixteen octets of a UUID are represented as 32 hexadecimal (base 16) digits, displayed in five groups separated by hyphens, in the form
8-4-4-4-12 for a total of 36 characters (32 alphanumeric characters and four hyphens). For example:
The four bits of digit
M indicate the UUID version, and the one to three most significant bits of digit
N indicate the UUID variant. In the example, M is
1 and N is
10xx), meaning that the UUID is a variant 1, version 1 UUID; that is, a time-based DCE/RFC 4122 UUID.
The canonical 8-4-4-4-12 format string is based on the "record layout" for the 16 bytes of the UUID:
|Name||Length (Bytes)||Length (Hex Digits)||Contents|
|time_low||4||8||integer giving the low 32 bits of the time|
|time_mid||2||4||integer giving the middle 16 bits of the time|
|time_hi_and_version||2||4||4-bit "version" in the most significant bits, followed by the high 12 bits of the time|
|clock_seq_hi_and_res clock_seq_low||2||4||1-3 bit "variant" in the most significant bits, followed by the 13-15 bit clock sequence|
|node||6||12||the 48-bit node id|
These fields correspond to those in version 1 and 2 time-based UUIDs, but the same 8-4-4-4-12 representation is used for all UUIDs, even for UUIDs which are constructed differently.
Microsoft GUIDs are sometimes represented with surrounding braces:
This format should not be confused with "registry format", which refers to the format within the curly braces.
The binary encoding of UUIDs varies between systems. Many systems encode the UUID entirely in a big-endian format.
00112233-4455-6677-8899-aabbccddeeff is encoded as the bytes
00 11 22 33
aa bb cc dd ee ff.
Other systems, notably Microsoft's marshalling of UUIDs in their COM/OLE libraries, use a mixed-endian format, whereby the first three components of the UUID are little-endian, and the last two are big-endian.
00112233-4455-6677-8899-aabbccddeeff is encoded as the bytes
33 22 11 00
aa bb cc dd ee ff.
One of the variants defined by RFC 4122, variant 0 (indicated by the one-bit pattern
0xxx N=0..7), is for backwards compatibility with the circa 1988, now obsolete, Apollo Network Computing System 1.5 UUID format. In this format, the first 6 octets of the UUID are a 48-bit timestamp (the number of 4 microsecond units of time since 1 Jan 1980 UTC); the next 2 octets are reserved; the next octet is the "address family"; and the final 7 octets are a 56-bit host ID in the form specified by the address family. Though different in detail, the similarity with modern version 1 UUIDs is evident. The variant bits in the current UUID specification coincide with the high bits of the address family octet in NCS UUIDs. Though the address family could hold values in the range 0..255, only the values 0..13 were ever defined. Accordingly, the variant 0 bit pattern
0xxx avoids conflicts with historical NCS UUIDs, should any still exist in databases.
The 3-bit variant bit pattern
111x N=e..f is reserved for possible future variants.
The other two variants, variants 1 and 2, are used by the current UUID specifications. Variant 1 UUIDs (
10xx N=8..b, 2 bits) are referred to as RFC 4122/DCE 1.1 UUIDs, or "Leach-Salz" UUIDs, after the authors of the original Internet Draft. Variant 2 (
110x N=c..d, 3 bits) is characterized in the RFC as "reserved, Microsoft Corporation backward compatibility", and was used for early GUIDs on the Windows platform. Variant bits aside, the two variants are the same except that when reduced to a binary form for storage or transmission, variant 1 UUIDs use "network" (big-endian) byte order, while variant 2 GUIDs use "native" (little-endian) byte order. In their textual representations, variants 1 and 2 are the same except for the variant bits.
When byte swapping is required to convert between the big-endian byte order of variant 1 and the little-endian byte order of variant 2, the fields above define the swapping. The first three fields are unsigned 32- and 16-bit integers and are subject to swapping, while the last two fields consist of uninterpreted bytes, not subject to swapping. This byte swapping applies even for version 3, 4, and 5 UUID's where the canonical fields do not correspond to the content of the UUID.
Note that while some important GUIDs, such as the identifier for the Component Object Model IUnknown interface, are nominally variant 2 UUIDs, many identifiers generated and used in Microsoft Windows software and referred to as "GUIDs" are standard variant 1 RFC 4122/DCE 1.1 network byte-order UUIDs, rather than little-endian variant 2 UUIDs. The current version of the Microsoft guidgen tool produces standard variant 1 UUIDs. Some Microsoft documentation states that "GUID" is a synonym for "UUID", as standardized in RFC 4122. RFC 4122 itself states that UUIDs "are also known as GUIDs". All this suggests that "GUID", while originally referring to a variant of UUID used by Microsoft, has become simply an alternative name for UUID, with both variant 1 and variant 2 GUIDs being extant.
For both variants 1 and 2, five "versions" are defined in the standards, and each version may be more appropriate than the others in specific use cases. Version is indicated by the
M in the string representation.
Version 1 UUIDs are generated from a time and a node id (usually the MAC address); version 2 UUIDs are generated from an identifier (usually a group or user id), time, and a node id; versions 3 and 5 produce deterministic UUIDs generated by hashing a namespace identifier and name; and version 4 UUIDs are generated using a random or pseudo-random number.
The "nil" UUID, a special case, is the UUID,
00000000-0000-0000-0000-000000000000; that is, all bits set to zero.
Version 1 (date-time and MAC address)Edit
Version 1 concatenates the 48-bit MAC address of the "node" (that is, the computer generating the UUID), with a 60-bit timestamp, being the number of 100-nanosecond intervals since midnight 15 October 1582 Coordinated Universal Time (UTC), the date on which the Gregorian calendar was first adopted. RFC 4122 states that the time value rolls over around 3400 AD, depending on the algorithm used, which implies that the 60-bit timestamp is a signed quantity. However some software, such as the libuuid library, treats the timestamp as unsigned, putting the rollover time in 5236 AD.
A 13- or 14-bit "uniquifying" clock sequence extends the timestamp in order to handle cases where the processor clock does not advance fast enough, or where there are multiple processors and UUID generators per node. With each version 1 UUID corresponding to a single point in space (the node) and time (intervals and clock sequence), the chance of two properly-generated version 1 UUID's being unintentionally the same is practically nil. Since the time and clock sequence total 74 bits, 274 (1.8x1022 or 18 sextillion) version 1 UUIDs can be generated per node id, at a maximum average rate of 163 billion per second per node id.
In contrast to other UUID versions, version 1 and 2 UUIDs based on MAC addresses from network cards rely for their uniqueness in part on an identifier issued by a central registration authority, namely the Organizationally Unique Identifier (OUI) part of the MAC address, which is issued by the IEEE to manufacturers of networking equipment. The uniqueness of version 1 and 2 UUIDs based on network card MAC addresses also depends on network card manufacturers properly assigning unique MAC addresses to their cards, which like other manufacturing processes is subject to error.
Usage of the node's network card MAC address for the node id means that a version 1 UUID can be tracked back to the computer that created it. Documents can sometimes be traced to the computers where they were created or edited through UUIDs embedded into them by word processing software. This privacy hole was used when locating the creator of the Melissa virus.
RFC 4122 does allow the MAC address in a version 1 (or 2) UUID to be replaced by a random 48-bit node id, either because the node does not have a MAC address, or because it is not desirable to expose it. In that case, the RFC requires that the least significant bit of the first octet of the node id should be set to 1. This corresponds to the multicast bit in MAC addresses and setting it serves to differentiate UUIDs where the node id is randomly-generated from those based on MAC addresses from network cards, which typically have unicast MAC addresses.
Version 2 (date-time and MAC Address, DCE security version)Edit
RFC 4122 reserves version 2 for "DCE security" UUIDs; but it does not provide any details. For this reason, many UUID implementations omit version 2. However, the specification of version 2 UUIDs is provided by the DCE 1.1 Authentication and Security Services specification.
Version 2 UUIDs are similar to version 1, except that the least significant 8 bits of the clock sequence are replaced by a "local domain" number, and the least significant 32 bits of the timestamp are replaced by an integer identifier meaningful within the specified local domain. On POSIX systems, local domain numbers 0 and 1 are for user ids (UIDs), and group ids (GIDs), respectively, and other local domain numbers are site-defined. On non-POSIX systems, all local domain numbers are site-defined.
The ability to include a 40-bit domain/identifier in the UUID comes with a tradeoff. On the one hand, 40 bits allow about 1 trillion domain/identifier values per node id. On the other hand, with the clock value truncated to the 28 most significant bits, compared to 60 bits in version 1, the clock in a version 2 UUID will "tick" only once every 429.49 seconds, a little more than 7 minutes, as opposed to every 100 nanoseconds for version 1. And with a clock sequence of only 6 bits, compared to 14 bits in version 1, only 64 unique UUID's per node/domain/identifier can be generated per 7 minute clock tick, compared to 16,384 clock sequence values for version 1. Thus, Version 2 may not be suitable for cases where UUIDs are required, per node/domain/identifier, at a rate exceeding about 1 per 7 seconds.
Versions 3 and 5 (namespace name-based)Edit
The namespace identifier is itself a UUID. The specification provides UUIDs to represent the namespaces for URLs, fully qualified domain names, object identifiers, and X.500 distinguished names; but any desired UUID may be used as a namespace designator.
To determine the version 3 UUID corresponding to a given namespace and name, the UUID of the namespace is transformed to a string of bytes, concatenated with the input name, then hashed with MD5, yielding 128 bits. Six or seven bits are then replaced by fixed values, the 4-bit version (e.g.
0011 for version 3), and the 2- or 3-bit UUID "variant" (e.g.
10 indicating a RFC 4122 UUIDs, or
110 indicating a legacy Microsoft GUID). Since 6 or 7 bits are thus predetermined, only 121 or 122 bits contribute to the uniqueness of the UUID.
Version 5 UUIDs are similar, but SHA1 is used instead of MD5. Since SHA1 generates 160-bit digests, the digest is truncated to 128-bits before the version and variant bits are inserted.
Version 3 and 5 UUIDs have the property that the same namespace and name will map to the same UUID. However, neither the namespace nor name can be determined from the UUID, given the other, except by brute-force search.
RFC 4122 recommends version 5 (SHA1) over version 3 (MD5) and counsels against use of UUIDs of either version as security credentials.
Version 4 (random)Edit
A version 4 UUID is randomly generated. As in other UUIDs, four bits are used to indicate version 4, and 2 or 3 bits to indicate the variant (
110 for variants 1 and 2, respectively). Thus, for variant 1 (that is, most UUIDs) a random version 4 UUID will have 6 predetermined variant and version bits, leaving 122 bits for the randomly-generated part, for a total of 2122, or 5.3x1036 (5.3 undecillion) possible version 4 variant 1 UUIDs. There are half as many possible version 4 variant 2 UUIDs (legacy GUIDs) because there is one less random bit available, 3 bits being consumed for the variant.
Some pseudorandom number generators lack necessary entropy to produce sufficiently pseudorandom numbers. For example, the WinAPI GUID generator, which uses a pseudorandom number generator, has been shown to produce UUIDs which follow a predictable pattern. RFC 4122 advises that "distributed applications generating UUIDs at a variety of hosts must be willing to rely on the random number source at all hosts. If this is not feasible, the namespace variant should be used."
Collision occurs when the same UUID is generated more than once and assigned to different referents. In the case of standard version 1 and 2 UUIDs using unique MAC addresses from network cards, collisions can occur only when an implementation varies from the standards, either inadvertently or intentionally.
In contrast with version 1 and 2 UUIDs using randomly-generated node ids, hash-based version 3 and 5 UUIDs, and random version 4 UUIDs, collisions can occur even without implementation problems, albeit with a probability so small that it can normally be ignored. This probability can be computed precisely based on analysis of the birthday problem.
For example, the number of random version 4 UUIDs which need to be generated in order to have a 50% probability of at least one collision is 2.71 quintillion, computed as follows:
This number is equivalent to generating 1 billion UUIDs per second for about 85 years, and a file containing this many UUIDs, at 16 bytes per UUID, would be about 45 exabytes, many times larger than the largest databases currently in existence, which are on the order of hundreds of petabytes.
The smallest number of version 4 UUIDs which must be generated for the probability of finding a collision to be p is approximated by the formula:
Thus, for there to be a one in a billion chance of duplication, 103 trillion version 4 UUIDs must be generated.
Significant uses include ext2/ext3/ext4 filesystem userspace tools (e2fsprogs uses libuuid provided by util-linux), LUKS encrypted partitions, GNOME, KDE, and Mac OS X, most of which are derived from the original implementation by Theodore Ts'o.
One of the uses of UUIDs in Solaris (using Open Software Foundation implementation) is identification of a running operating system instance for the purpose of pairing crash dump data with Fault Management Event in the case of kernel panic.
There are several flavors of GUIDs used in Microsoft's Component Object Model (COM):
- IID – interface identifier; (The ones that are registered on a system are stored in the Windows Registry at
- CLSID – class identifier; (Stored at
- LIBID – type library identifier; (Stored at
- CATID – category identifier; (its presence on a class identifies it as belonging to certain class categories, listed at
As database keysEdit
UUIDs are commonly used as a unique key in database tables. The NEWID function in Microsoft SQL Server version 4 Transact-SQL returns standard random version 4 UUIDs, while the NEWSEQUENTIALID function returns 128-bit identifiers similar to UUIDs which are committed to ascend in sequence until the next system reboot. The Oracle Database SYS_GUID function does not return a standard GUID, despite the name. Instead, it returns a 16-byte 128-bit RAW value based on a host identifier and a process or thread identifier, somewhat similar to a GUID. PostgreSQL contains a UUID datatype, and can generate most versions of UUIDs through the use of functions from modules. MySQL provides a UUID function, which generates standard version 1 UUIDs.
The random nature of standard version 3, 4, and 5 UUIDs and the ordering of the fields within standard version 1 and 2 UUIDs may create problems with database locality or performance when UUIDs are used as primary keys. For example, in 2002 Jimmy Nilsson reported a significant improvement in performance with Microsoft SQL Server when the version 4 UUIDs being used as keys were modified to include a non-random suffix based on system time. This so-called "COMB" (combined time-GUID) approach made the UUIDs non-standard and significantly more likely to be duplicated, as Nilsson acknowledged, but Nilsson only required uniqueness within the application.
- Zahn, Lisa (1990). Network Computing Architecture. Prentice Hall. p. 10. ISBN 0-13-611674-4.
- Leach, P.; Mealling, M.; Salz, R. (July 2005). A Universally Unique IDentifier (UUID) URN Namespace. Internet Engineering Task Force. RFC 4122. https://tools.ietf.org/html/rfc4122. Retrieved 2017-01-17.
- "CDE 1.1: Remote Procedure Call". The Open Group. 1997.
- "DCE 1.1: Authentication and Security Services". The Open Group. 1997.
- "ITU-T Study Group 17 - Object Identifiers (OID) and Registration Authorities Recommendations". ITU.int. Retrieved 2016-12-20.
- "Registry Keys and Entries for a Type 1 Online Store". Microsoft Developer Network. Microsoft.
- "Globally Unique Identifiers". Microsoft Developer Network. Microsoft.
- "ext2/e2fsprogs.git - Ext2/3/4 filesystem userspace utilities". Kernel.org. Retrieved 9 January 2017.
- The Institute of Electrical and Electronics Engineers, Incorporated (IEEE) (1963-01-01). Registration authority.
- Reiter, Luke (1999-04-02). "Tracking Melissa's Alter Egos". ZDNet. CBS Interactive. Retrieved 2017-01-16.
- Kuchling, A.M. "What's New in Python 2.5". Python.org. Retrieved 23 January 2016.
- Jesus, Paulo; Baquero, Carlos; Almaeida, Paula. "ID Generation in Mobile Environments" (PDF). Repositorium.Sdum.Uminho.pt.
- Mathis, Frank H. (June 1991). "A Generalized Birthday Problem". SIAM Review. Society for Industrial and Applied Mathematics. 33 (2): 265–270. doi:10.1137/1033051. ISSN 0036-1445. JSTOR 2031144. OCLC 37699182.
- Guinness Book of World Records. "Largest data warehourse".
- gen_uuid.c in Apple's Libc-391, corresponding to Mac OS X 10.4
- "Crashdump Restructuring in Solaris". Blogs.Oracle.com. Oracle. Retrieved 9 January 2017.
- "Interface Pointers and Interfaces". Windows Dev Center - Desktop app technologies. Microsoft. Retrieved 15 December 2015.
You reference an interface at run time with a globally unique interface identifier (IID). This IID, which is a specific instance of a globally unique identifier (GUID) supported by COM, allows a client to ask an object precisely whether it supports the semantics of the interface, without unnecessary overhead and without the confusion that could arise in a system from having multiple versions of the same interface with the same name.
- "Registering a Type Library". Microsoft Developer Network. Microsoft. Retrieved 15 December 2015.
- "Categorizing by Component Capabilities". Windows Dev Center - Desktop app technologies. Microsoft. Retrieved 15 December 2015.
A listing of the CATIDs and the human-readable names is stored in a well-known location in the registry.
- "NEWSEQUENTIALID (Transact-SQL)". Microsoft Developer Network. Microsoft. 2015-08-08. Retrieved 2017-01-14.
- "Oracle Database SQL Reference". Oracle.
- "PostgreSQL 9.4.10 Documentation, Section 8.12 UUID Type". PostgreSQL.org. PostgreSQL Global Development Group.
- "PostgreSQL: Documentation: 9.6: uuid-ossp".
- "PostgreSQL: Documentation: 9.6: pgcrypto".
- "MySQL 5.7 Reference Manual, Section 13.20 Miscellaneous Functions". MySQL.com. Oracle.
- Nilsson, Jimmy. "InformIT". InformIT. Retrieved 2012-06-20.
- Technical Note TN2166 Secrets of the GPT – Mac Developer Library
- UEFI and Windows – Microsoft TechNet
- CLSID Registry Key Information – Microsoft Developer Network
- How to generate and parse UUIDs (or GUIDs) in Java
- International Standard "X.667 : … Generation … of Universally Unique Identifiers (UUIDs)…" (ITU-T Rec. X.667 as of 2008–08, freely available)
- International Standard "Generation and registration of Universally Unique Identifiers (UUIDs) and their use as ASN.1 Object Identifier components" (ITU-T Rec. X.667, freely available)
- Universally Unique Identifiers (ITU, includes link to a page where Version 1 and Version 4 UUIDs may be generated)
- ISO/IEC 9834-8:2008 "... Generation and registration of Universally Unique Identifiers (UUIDs) and their use as ASN.1 Object Identifier components"
- Commons Id
- Syntax and semantics of the DCE variant of Universal Unique Identifiers (UUIDs)
- Random UUID Probability of Duplicates
- A Brief History of the UUID