This article needs additional citations for verification. (March 2008) (Learn how and when to remove this template message)
A foot-candle (sometimes foot candle; abbreviated fc, lm/ft2, or sometimes ft-c) is a non-SI unit of illuminance or light intensity. The foot-candle is defined as one lumen per square foot. This unit is commonly used in lighting layouts in parts of the world where United States customary units are used, mainly the United States. Most of the world uses the corresponding SI derived unit lux, defined as one lumen per square meter.
General Electric Light Meter used in photography to measure light values in foot candles.
|Unit system||United States customary units|
|1 fc in ...||... is equal to ...|
|SI derived unit||10.76 lux|
|CGS units||1.076×10−3 phots|
The unit foot-candle is defined as the amount of illumination the inside surface of a one-foot-radius sphere would be receiving if there were a uniform point source of one candela in the center of the sphere. Alternatively, it can be defined as the illuminance of one lumen on a one-square foot surface with a uniform distribution. Given the relation between candela and lumen, the two definitions listed are identical, with the second one potentially being easier to relate to in some everyday situations.
One foot-candle is equal to approximately 10.76 lux.[note 1] In practical applications, as when measuring room illumination, it is often not needed to measure illuminance more accurately than ±10%, and for many purposes it is quite sufficient to think of one foot-candle as about ten lux as is typically done in the lighting industry.
In the US lighting industry, foot-candles are a common unit of measurement used by architects to calculate adequate lighting levels. Foot-candles are also commonly used in the museum and gallery fields in the US, where lighting levels must be carefully controlled to conserve light-sensitive objects such as prints, photographs, and paintings, the colors of which fade when exposed to bright light for a lengthy period.
In the motion picture cinematography field in the US, incident light meters are used to measure the number of foot-candles present, which are used to calculate the intensity of motion picture lights, allowing cinematographers to set up proper lighting-contrast ratios when filming.
Full, unobstructed sunlight has an intensity of approximately 10,000 fc. An overcast day will produce an intensity of around 100 fc. The intensity of light near a window can range from 100 to 5,000 fc, depending on the orientation of the window, time of year and latitude.
Lighting requirements for commercial spaces range from 5 fc for storage spaces to 200 fc for visually intensive work.
- Photometry (optics) for more on the measurement of light.
- One lumen per square foot is equal to 0.3048−2 lumens per square meter. Since illuminance follows the inverse-square law a source that is farther away casts less illumination than one that is close, so one lux is less illuminance than one foot-candle.
- "Lux Meters (Light Meters) Information". Retrieved November 27, 2019.
- "How Much Light Is Enough? Footcandle Recommendations". Retrieved 2018-04-18.
- "How much light do I need?". Retrieved 2018-04-18.