FS Class E.380

(Redirected from FS Class E.390)

The FS Class E.380 was a small class of three-phase electric locomotive used in Italy, introduced in the 1900s.

Class E.380
Type and origin
Power typeelectric
BuilderGanz
Build date1905
Total produced4
Specifications
Configuration:
 • AAR1-C-1
 • UIC1′C1′
Gauge1,435 mm (4 ft 8+12 in) standard gauge
Loco weight64.6 t (63.6 long tons; 71.2 short tons)
Electric system/sThree-phase 3.6 kV 16.7 Hz Catenary
Current pickup(s)Bow collector
Performance figures
Maximum speed71.2 km/h (44.2 mph)
Power output1,250 kW (1,680 hp)
Career
OperatorsFS
First run1906
Retiredunknown

Overview

edit

The locomotives, which entered in service in a small batch of 4 units, were characterized by a central cabin with two large hoods at each end. Built by Ganz, they had a similar mechanical equipment to the E.360 type. The E.380s showed a series of problems, so that two were refurbished as E.390.

Technical details

edit

The two fixed speeds were obtained by changing the motor connections. For high speed the motors were connected in parallel. For low speed the two motors were "cascaded" by connecting the rotor of one motor to the stator of the other. This caused both motors to run at half speed.[1]

Withdrawal

edit

The low power output at the highest speed, and the limitation of use to only two fixed speeds (due to the control arrangement of the three-phase motors) led both classes to be retired after a short service period.

References

edit
  1. ^ Adorno, Silvia (September 2010). "Il motore trifase asincrono, dalle E.330 alle E.471" (in Italian).