M6 gun motor carriage

(Redirected from Dodge WC-55)

The 37 mm gun motor carriage M6, also known as M6 Fargo, and under the manufacturer (Dodge)'s designation WC55, was a modified Dodge WC52 light truck mounting a light anti-tank gun. It was used by the United States Army for infantry support and as a mobile anti-tank gun. It operated from late 1942 to January 1945 in the Mediterranean, European, and Pacific theaters of World War II. The M6 saw limited use during the war, and was poorly suited to modern warfare as it was unarmored and was armed with a too small caliber gun. Being required to back into firing positions rather than forward firing proved to be a deficiency.

37 mm gun motor carriage M6
Side view of 37 mm gun motor carriage M6
TypeTank destroyer
Place of originUnited States
Service history
In service1942–1945
Used byUnited States, Free France, Philippine Commonwealth
WarsWorld War II
Production history
Unit cost$4,265
Specifications
Mass7,350 lb (3,330 kg)
Length14 ft 10 in (4.52 m)
Width7 ft 4 in (2.24 m)
Height6 ft 11 in (2.11 m)
Crew4 (Commander, gunner, loader, driver)

ArmorGun shield:
.25 in (0.64 cm)
Main
armament
37 mm gun M3
80 rounds
EngineDodge T-214 6 cylinder 4-cycle inline gasoline engine
99 hp (74 kW)
Power/weight29.7 hp/metric ton
SuspensionSemi-elliptic leaf spring
Operational
range
180 mi (290 km) on road
Maximum speed 55 mph (89 km/h) on road

Description

edit
 
M6 WC-55 top schematic

The 37 mm GMC M6 was a modified 3/4-ton 4x4 Dodge WC52 truck with a rear-facing 37 mm M3 gun mounted in its bed (portee) and designated WC55. The gun was normally fired to the rear – it could not be fully depressed when pointed to the front of the vehicle due to blast effects on the crew and vehicle windshield. The gun fired M74 Armor Piercing (AP) Shot that could penetrate 1.4 in (3.6 cm) of armor at 500 yd (460 m). Other ammunition carried throughout its service life included the Armor Piercing Capped (APC) M51 Projectile (which could penetrate 2.4 in (6.1 cm) of armor at 500 yd), and the High Explosive (HE) M63 Projectile. Eighty rounds of 37 mm ammunition were carried aboard.[1]

The crew-members were equipped with personal weapons for self-defense.

Service

edit
 
Second Army Tennessee Maneuvers – to increase firepower, a 50 cal. machine gun was mounted on the front of the 37 mm gun truck (June 1943).

With the design standardized in February 1942, 5,380 GMC 37 mm M6 GMC were built between April and October, 1942, at a cost of $4,265 per unit.[2] American doctrine planned for tank destroyers to defeat enemy tank attacks while tank units proper carried out offensive duties. The 37 mm GMC M6 saw limited employment with U.S. forces (the 601st and 701st Tank Destroyer Battalions) during the campaign in Tunisia in late 1942 and early 1943. The vehicle was not well liked because it lacked armor and carried an anti-tank gun that was largely ineffective against German tanks of the period. The 37 mm GMC M6 also saw limited use in the Pacific Theater in 1943 and 1944.[3] They equipped some Marine units, but were withdrawn before seeing combat. The 37 mm GMC M6 was soon classified as "limited standard" in September 1943, because of the availability of more powerful tank destroyers mounting 75 mm (2.95 in) and 3 in (76 mm) guns. In January 1945, the GMC M6 was declared obsolete.

After the Tunisian campaign, many M6 Fargos had their 37 mm gun removed and reverted to a cargo truck role as the WC52. Some of these 37 mm guns were mounted onto halftracks to provide the armored infantry with a gun halftrack.[4] Other 37 mm GMC M6 vehicles found their way into service with the French Army, and were later provided to French Forces of the Interior units after the liberation of France.[5] Despite the vehicle's obvious limitations on the battlefields of Northwest Europe 1944–1945, the FFI used practically any vehicle they could obtain because of equipment shortages of all kinds.

See also

edit

References

edit
Notes
  1. ^ Hogg, Ian V. (introduction), The American Arsenal, page 45. Mechanicsburg: Stackpole Books, 2001. (This is a reprint of the U.S. War Department Ordnance Standard Catalog. with other reference data for the GMC M6 as well.)
  2. ^ Zaloga, (1996) page 3.
  3. ^ Zaloga (1996) pp 4, 64.
  4. ^ Zaloga, page 12.
  5. ^ Zaloga, page 4.
Bibliography
  • Zaloga, Stephen J., U.S. Tank Destroyers in Combat 1941-1945, Hong Kong: Concord Publications, 1996
edit