Micro ribbon connector
The connector contains two parallel rows of contacts within a shielded case having a characteristic D-shape similar to that used in D-subminiature connectors. The contacts are not pins, but small flat bands of metal, called ribbon contacts. The connectors are manufactured in many capacities, including 14-, 24-, 36-, 50-, 64-, and 100- pin varieties. They may be mounted on boards, panels, or may terminate cables. Wires are attached by means of solder, crimping or insulation displacement. Female connectors have bail locks for a sturdy connection to the male connector. Screws may also be employed to secure connections.
This connector type is also known as telco, 25-pair, miniature delta ribbon, mini D ribbon, delta ribbon, MDR, Amphenol, or CHAMP miniature ribbon connector. Although it was invented by Amphenol, many companies now produce it, such as 3M, TE Connectivity (formerly Tyco Electronics, formerly AMP), and Hirose Electric Group.
Two major sizes are available. The larger size has 0.085 inch contact pitch. This size, with 36 pins and bail locks, is also known as a Centronics connector because of its introduction by Centronics for use with the parallel port of printers, and is standardized as IEEE 1284 type B. Other connectors of this size are also called Centronics connectors. The smaller size has 0.050 inch pitch. This size, with 36 pins, is also known as a mini-Centronics connector, and is standardized as IEEE 1284 type C.
- "4". ANSI/IEEE Std 488.1-1987 IEE Standard Digital Interface for Programmable Instrumentation. New York: The Institute of Electrical and Electronic Engineers, Inc. 1988. pp. 67–71.
|Wikimedia Commons has media related to Centronics connectors.|