9×21mm

(Redirected from 9×21)

The 9×21mm pistol cartridge (also known as the 9×21mm GP, 9×21mm IMI, 9mm IMI, 9×21mm Italian, or 9mm Italian) was designed by Jager (Loano, Italy), then adopted and commercialised by Israel Military Industries for those jurisdictions where military service cartridges, like the 9×19mm Parabellum, are or were illegal for civilian purchase (i.e. Italy, France, Brazil, and Mexico).

9×21mm
9×21mm (left) and parent 9×19mm Parabellum (right) cartridges
TypePistol
Place of originItaly
Israel
Production history
DesignerFranco Benvenuti Agency (Italy) and Israel Military Industries (IMI)
Produced1980–present
Specifications
Parent case9×19mm Parabellum
Case typeRimless, straight
Bullet diameter9.03 mm (0.356 in)
Land diameter8.79 mm (0.346 in)
Neck diameter9.63 mm (0.379 in)
Base diameter9.93 mm (0.391 in)
Rim diameter9.96 mm (0.392 in)
Rim thickness1.27 mm (0.050 in)
Case length21.15 mm (0.833 in)
Overall length29.75 mm (1.171 in)
Case capacity1.01 cm3 (15.6 gr H2O)
Rifling twist254 mm (1 in 10 in)
Primer typeSmall pistol
Maximum pressure235.00 MPa (34,084 psi)
Ballistic performance
Bullet mass/type Velocity Energy
7.45 g (115 gr) FMJ 390 m/s (1,300 ft/s) 570 J (420 ft⋅lbf)
8.00 g (123 gr) FMJ 360 m/s (1,200 ft/s) 518 J (382 ft⋅lbf)
Source(s): C.I.P.[1]

History

edit

Based on the 9×19mm Parabellum cartridge, the case was lengthened from 19.05 to 21.15 mm (0.750 to 0.833 in). The bullet sits slightly deeper in the case, which results in almost the same overall length as the 9×19mm Parabellum cartridge (29.69 to 29.75 mm (1.169 to 1.171 in)).

The cartridge was designed by Erasmus Giordano & Armando Piscetta to be used for civil purposes with large pistols (also those designed for .45 ACP). It was named "9 mm GP". The users were not enthusiastic at the very beginning for several reasons, such as the fact that barrels had to be modified.

During the 1980s, Israel Military Industries (IMI) started to use 9×21mm and received permission to import the UZI Defender (also called Micro Uzi) into Italy chambered for 9×21 IMI. It was the first official commercial launch for the 9×21mm. From that period on several companies in Italy started to sell 9×21mm pistols and ammunition. In just a few decades, the 9×21mm GP or 9×21 IMI became roughly 80% of the civilian small arms market in Italy.

Competition use

edit

As it is a rimless round, the 9×21mm is used in USPSA/IPSC competition in open class firearms. A rimless case is preferred because, unlike semi-rimmed or rimmed cartridges, it will not tend to lock together with other rounds in a double-column magazine, resulting in a malfunction. As other .38 Super–based rimless cartridges became available, the 9×21mm decreased in popularity in the United States for competition use, but it is still widely used in many other parts of the world.

Synonyms

edit
  • 9×21mm IMI
  • 9 mm IMI
  • 9mm Italiano
  • Winchester 9×21mm WIN [124-gr. bullet]

Cartridge dimensions

edit

The 9×21mm has 1.01 ml (15.5 grains H2O) cartridge case capacity.

 

9×21mm maximum C.I.P. cartridge dimensions[1] All sizes in millimeters (mm).

The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 4 grooves, Ø lands = 8.79 mm, Ø grooves = 9.03 mm, land width = 3.80 mm and the primer type is small pistol.

According to the official C.I.P. (Commission Internationale Permanente pour l'épreuve des armes à feu portatives) guidelines, the 9×21mm case can handle up to 235 MPa (34,100 psi) piezo pressure. In C.I.P. regulated countries every pistol cartridge combo has to be proofed at 130% of this maximum C.I.P. pressure to certify for sale to consumers.

See also

edit

References

edit
  1. ^ a b "C.I.P. decisions, texts and tables - free current C.I.P. CD-ROM version download (ZIP and RAR format)". Archived from the original on June 20, 2009. Retrieved 2008-10-17.

Further reading

edit