Perfluoromethyldecalin

Perfluoromethyldecalin is a fluorocarbon liquid—a perfluorinated derivative of the hydrocarbon methyldecalin. It is chemically and biologically inert. It is mainly of interest as a blood substitute, exploiting the high solubility of air in this solvent.[1]

Perfluoromethyldecalin
Perfluoro-1-methyldecalin
Perfluoro-2-methyldecalin
Names
IUPAC names
  • 1-methyl: 1,1,2,2,3,3,4,4,4a,5,5,6,6,7,7,8,8a-heptadecafluorodecahydro-8-(trifluoromethyl)naphthalene
  • 2-methyl: 1,1,2,2,3,3,4,4,4a,5,5,6,6,7,8,8,8a-heptadecafluorodecahydro-7-(trifluoromethyl)naphthalene
Other names
Flutec PP9
Identifiers
  • Compounds
  • Mixture
  • 1-methyl: Perfluoro-1-methyldecalin
  • 2-methyl: Perfluoro-2-methyldecalin
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.005.630 Edit this at Wikidata
EC Number
  • Mixture: 206-191-9
UNII
  • 1-methyl: InChI=1S/C11F20/c12-1-2(13,6(19,20)10(27,28)9(25,26)4(1,15)16)5(17,18)8(23,24)7(21,22)3(1,14)11(29,30)31
    Key: LWRNQOBXRHWPGE-UHFFFAOYSA-N
  • 2-methyl: InChI=1S/C12F22/c13-1-2(14,11(29,30)31)4(16,12(32,33)34)8(23,24)6(19,20)3(1,15)7(21,22)10(27,28)9(25,26)5(1,17)18
    Key: UYXKOSTWUQXOMT-UHFFFAOYSA-N
  • 1-methyl: FC1(C(F)(C2(C(F)(C(F)(C(F)(C(F)(C2(C(F)(C1(F)F)F)F)F)F)F)F)F)C(F)(F)F)F
  • 2-methyl: FC(F)(F)C1(F)C(F)(F)C2(F)C(F)(F)C(F)(F)C(F)(F)C(F)(F)C2(F)C(F)(F)C1(F)F
Properties
C11F20
Molar mass 512.089 g·mol−1
Appearance Clear, colorless liquid
Density 1.972 g/mL
Melting point −70 °C (−94 °F; 203 K)
Boiling point 160 °C (320 °F; 433 K)
10 ppm
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
None
Flash point None
None
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Structural isomers

edit

Most commercially available perfluoromethyldecalin consists of both perfluoro-1-methyldecalin and perfluoro-2-methyldecalin. Each structural isomer has its own CAS registry number, as does the mixture. The two isomers are chemically and physically very similar.

Manufacture

edit

Perfluoromethyldecalin can be manufactured by the Fowler process, which involves moderating the action of elemental fluorine with cobalt fluoride in the gas phase from methylnaphthalene. Methylnaphthalene is preferred as the starting material vs methyldecalin as is consumes less fluorine.[2]

Properties

edit

Perfluoromethyldecalin is chemically inert and thermally stable (to over 400 °C). It has been evaluated as a blood substitute.[1]

It is a colorless liquid, with a relatively high density, low viscosity, and low surface tension that evaporates rapidly for a compounds with its high molecular weight. It is a relatively good solvent for gases, but a poor solvent for solids and liquids.[3]

In common with other cyclic perfluorocarbons, perfluorodecalin can be detected at extremely low concentrations; it has therefore been proposed for use as a perfluorocarbon tracer.[4] Its higher boiling makes it suitable for use in water flow.[5]

Other applications include use as a heat transfer agent and a dielectric fluid.

References

edit
  1. ^ a b Siegemund, G.; Schwertfeger, W.; Feiring, A.; Smart, B.; Behr, F.; Vogel, H.; McKusick, B. "Fluorine Compounds, Organic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a11_349. ISBN 978-3527306732.
  2. ^ Sandford G (2003). "Perfluoroalkanes". Tetrahedron. 59 (4): 437–454. doi:10.1016/s0040-4020(02)01568-5.
  3. ^ "Solubility in Liquids" (PDF). F2 Chemicals.
  4. ^ Begley P.; Foulger B.; Simmonds P. (1988). "Femtogram detection of perfluorocarbon tracers using capillary gas chromatography-electron-capture negative ion chemical ionisation mass spectrometry". J. Chromatogr. 445 (1): 119–128. doi:10.1016/s0021-9673(01)84513-1. PMID 3215967.
  5. ^ Fogelqvist E, Krysell M, Öhman P (1989). "Evaluation of perfluoromethyldecalin as a deliberate tracer for the study of water mixing processes". Marine Chemistry. 26 (4): 339–349. Bibcode:1989MarCh..26..339F. doi:10.1016/0304-4203(89)90039-x.