Wikipedia

Advanced Tactical Fighter

The Advanced Tactical Fighter (ATF) was a program undertaken by the United States Air Force to develop a next-generation air superiority fighter to counter emerging worldwide threats, including Soviet Sukhoi Su-27 and Mikoyan MiG-29 fighters under development in the 1980s, Beriev A-50 airborne warning and control system (AWACS), and increasingly sophisticated surface-to-air missile systems.[2] Lockheed and Northrop were selected in 1986 to respectively develop the YF-22 and the YF-23 technology demonstrator aircraft for the program's demonstration and validation (Dem/Val) phase. These aircraft were evaluated in 1991 and the Lockheed team was selected for full-scale development, or engineering and manufacturing development (EMD), and later developed the F-22 Raptor for production and operational service.

Advanced Tactical Fighter (ATF)
The YF-22 (foreground) and YF-23 (background)
General information
Project forAir superiority fighter
Issued byUnited States Air Force
Proposalsproposals from Boeing, General Dynamics, Lockheed, Northrop, and McDonnell Douglas[1]
PrototypesLockheed YF-22, Northrop YF-23
RequirementAdvanced Tactical Fighter Statement of Operational Need (November 1984), System Operational Requirements Document (December 1987)
History
InitiatedMay 1981 (1981-05) (RFI), September 1985 (1985-09) (RFP)
ConcludedAugust 1991 (1991-08)
OutcomeYF-22 team selected for full-scale development of the F-22 for production and service
VariationsJAFE, NATF, Have Dash II

History edit

Background edit

Although the term "Advanced Tactical Fighter" (ATF) appeared in U.S. Air Force (USAF) parlance as far back as 1971 to describe potential future tactical aviation platforms, the program that would eventually result in the F-22 began in 1981.[3] This was motivated by intelligence reports of multiple emerging worldwide threats emanating from the Soviet Union. In 1978, satellite photographs of the "Ram-K" and "Ram-L" fighter prototypes at Ramenskoye air base in Zhukovsky — later identified as the Su-27 "Flanker" and the MiG-29 "Fulcrum" respectively — indicated that a new generation of Soviet fighter aircraft comparable to the recently introduced F-15 Eagle and F-16 Fighting Falcon would soon enter service.[4] Also concerning were Soviet reports of "look-down/shoot-down" capability being introduced on an advanced MiG-25 derivative, later revealed as the MiG-31 "Foxhound", as well as the appearance of an Il-76-based airborne warning and control system (AWACS) aircraft called the A-50 "Mainstay". Furthermore, experience and data from the Vietnam War and the more recent 1973 Yom-Kippur War demonstrated the increasing lethality and sophistication of Soviet surface-to-air missile systems.[5][6][7]

Concept development edit

 
Diagram of several designs submitted for request for information (RFI).

In 1981, USAF began forming requirements for the ATF, initially codenamed "Senior Sky". In May, a request for information (RFI) was published by the USAF Aeronautical Systems Division (ASD), followed by another RFI for the ATF propulsion systems in June. Design concepts were provided by defense contractors and analyzed by the ASD, which released their final report in December 1982. During this time, the ASD also established an internal ATF Concept Development Team in October 1982 to manage concept development studies. While there was a great variety in the responses due to the ATF still early in its requirements definition, including whether the aircraft should be focused on air-to-air or air-to-surface, the common areas among the concepts were stealth (though not to the extent of the final requirements), short takeoff and landing (STOL) and sustained supersonic cruise without afterburners, or supercruise.[8][9] It was envisioned that the ATF would incorporate emerging technologies including advanced alloys and composite material, advanced fly-by-wire flight control systems, higher power propulsion systems, and low-observable, or stealth technology.[10]

 
ATF SPO Patch, 1990

By October 1983, the ATF Concept Development Team had become the System Program Office (SPO) led by Colonel Albert C. Piccirillo at Wright-Patterson Air Force Base. After discussions with Tactical Air Command (TAC), the SPO determined that the ATF should focus on air-to-air; the air-to-surface missions would be handled by the F-111, the product of the Dual-Role Fighter (DRF) program (which would result in the F-15E Strike Eagle) as well as the then-classified F-117 Nighthawk, while the air-to-air threat from the new Soviet fighters and AWACS remained.[11][12] Thus, the ATF would be a new air superiority fighter with outstanding aerodynamic performance intended to replace the capability of the F-15 Eagle, and in the potential scenario of a Soviet and Warsaw Pact invasion in Central Europe, the ATF was envisaged to perform offensive and defensive counter-air missions against the Soviet air-to-air threats that would allow the DRF and other strike aircraft to hit ground formations.[12]

With the ATF's mission now focused on air-to-air, further requests were sent to the industry for concept exploration and study contracts were awarded to seven airframe manufacturers for further definition of their designs. A request for proposals (RFP) for the fighter's engine, called the Joint Advanced Fighter Engine (JAFE), was released in May 1983. Pratt & Whitney and General Electric received contracts for the development and production of prototype engines in September 1983.[13]

During this time, the SPO took an increasing interest in stealth as results from black world programs such as the Have Blue/F-117, Tacit Blue, and the Advanced Technology Bomber (ATB) program (which would result in the B-2) promised greatly reduced radar cross sections (RCS) that were orders of magnitude smaller than existing aircraft. The ATF requirements would place increasing emphasis on stealth over the course of concept exploration, while still demanding fighter-like speed and maneuverability. By late 1984, the SPO had settled on the ATF requirements and released the Statement of Operational Need (SON), which called for a fighter with a takeoff gross weight of 50,000 pounds (23,000 kg), a mission radius of 800 miles (1,300 km), supercruise speed of Mach 1.4–1.5, the ability to use a 2,000 feet (610 m) runway, and stealth particularly in the frontal sector.[11][14]

Request for proposals edit

A request for proposals (RFP) for demonstration and validation (Dem/Val) was issued in September 1985, with proposals initially to be due that December.[10][15] The top four proposals, later reduced to two, would proceed with Dem/Val. The RFP not only had the ATF's demanding technical requirements, but also placed great importance on systems engineering, technology development plans, and risk mitigation; in fact, these areas were deemed more important than the aircraft designs themselves as contractors would later discover in their debriefs after Dem/Val selection.[16] This was because the SPO anticipated that the ATF would need to employ emerging technologies beyond even the contemporary state-of-the-art and did not want a point aircraft design frozen at then-mature technology readiness levels; as such, the SPO needed to evaluate its confidence in a contractor's ability to effectively and affordably develop new technology.[17]

At this time, the SPO had anticipated procuring 750 ATFs at a unit cost of $35 million in fiscal year (FY) 1985 dollars.[17] Shortly afterwards, the U.S. Navy under Congressional pressure joined the ATF program initially as an observer to examine the possibility using a navalised derivative, named the Navy Advanced Tactical Fighter (NATF), to replace the F-14 Tomcat; the Navy would eventually announced that they would procure 546 aircraft under the NATF program.[18][19]

The Dem/Val RFP would see some changes after its first release that pushed the due date to July 1986; in December 1985, following discussions with Lockheed and Northrop, the two contractor teams with prior stealth experience from the F-117 and B-2 respectively, stealth requirements were drastically increased. Furthermore, the Packard Commission had released its report in February 1986 and one of its recommendations was a "fly-before-buy" competitive procurement strategy that encouraged prototyping. The ATF SPO was pressured to followed the recommendations of the Packard Commission, and in May 1986, the RFP was changed so that final selection would involve flying prototypes. Because of this late addition due to political pressure, the prototype air vehicles were to be "best-effort" machines not meant to perform a competitive flyoff or represent a production aircraft that meets every requirement, but to demonstrate the viability of its concept and mitigate risk.[N 1][17]

 
Lockheed's submission for Dem/Val RFP. The eventual YF-22 would have a completely different configuration.

In July 1986, proposals were provided by Boeing, General Dynamics, Grumman, Lockheed, Northrop, McDonnell Douglas, and Rockwell; Grumman and Rockwell would drop out shortly afterwards.[1] Because contractors were expected to make immense investments of their own — likely matching or exceeding the amount awarded by the contracts themselves when combined — in order to develop the necessary technology to meet the ambitious requirements, teaming was encouraged by the SPO. Following proposal submissions, Lockheed (through its Skunk Works division), Boeing, and General Dynamics formed a team to develop whichever of their proposed designs was selected, if any. Northrop and McDonnell Douglas formed a team with a similar agreement.[20][21]

 
Northrop’s submission for Dem/Val RFP. In contrast to Lockheed, note the great similarity to the eventual YF-23.

Two contractors, Lockheed and Northrop, were selected on 31 October 1986 as first and second place and would proceed as the finalists. Noteworthy is the divergent approach of the two finalists' proposals. Northrop's proposal leveraged its considerable experience with stealth to produce a refined and well-understood aircraft design that was very similar to the eventual flying prototype.[22][23] While Lockheed also had extensive prior stealth experience, their actual aircraft design was quite immature and only existed as a rough concept; instead, Lockheed primarily focused on systems engineering and trade studies in its proposal, which pull it ahead of Northrop's to take top rank.[16] The two teams, Lockheed/Boeing/General Dynamics and Northrop/McDonnell Douglas, then undertook a 50-month Dem/Val phase, culminating in the flight test of two technology demonstrator prototypes, the YF-22 and the YF-23.[24]

Demonstration and validation edit

Main articles: Lockheed YF-22 and Northrop YF-23

The Dem/Val phase was intended to develop and mature ATF technologies that would facilitate the fighter's eventual full-scale development and production, and focused on three main activities: system specification development, avionics ground prototypes and flying laboratories, and prototype air vehicles.[25] During Dem/Val, the ATF SPO program manager was Colonel James A. Fain, while the technical director (or chief engineer) was Eric "Rick" Abell. The director of ATF requirements was Colonel David J. McCloud of TAC, and the draft System Operational Requirements Document (SORD), derived from the 1984 SON, was released in December 1987.[26]

Unlike with many prior USAF programs, the ATF SPO had set the technical requirements without specifying the "how", thus giving the contractor teams flexibility in developing the requisite technologies and offer competing methods.[25] Furthermore, the SPO was also open to adjusting requirements if necessary. Both contractor teams conducted performance and cost trade studies and presented them in system requirement reviews (SRRs) with the SPO. This enabled the SPO to adjust ATF requirements and delete ones that were significant weight and cost drivers while having marginal operational value. For instance, the number of internal missiles (represented by the AIM-120A) was reduced from eight to six to reduce weight and cost.[16] Because of the added weight for thrust vectoring/reversing nozzles and related systems on the F-15 S/MTD research aircraft, the SPO changed the runway length requirement to 3,000 feet (910 m) and removed the thrust reverser requirement in late 1987.[27][28] The ejection seat requirement was downgraded from a fresh design to the existing McDonnell Douglas ACES II. However, both contractor teams still found the 50,000-lb takeoff gross weight goal unachievable, so this was increased to 60,000 lb (27,200 kg), resulting in engine thrust requirement increasing from 30,000 lbf (133 kN) to 35,000 lbf (156 kN) class.[29]

 
The Boeing 757 used for testing the Lockheed team's avionics and later modified into the Flying Test Bed during full-scale development.

Aside from advances in air vehicle and propulsion technology, the ATF would make a leap in avionics performance with a fully integrated avionics suite that fuses sensor information together into a common tactical picture, thus improving the pilot's situational awareness and reducing workload.[30] The Dem/Val phase for avionics development was marked by demonstrations of the hardware and software with Avionics Ground Prototypes (AGP) to evaluate performance and reliability. The SPO gave the teams flexibility to pick their own vendors for some avionics subsystems; for instance, the Lockheed team’s infrared search and track (IRST) sensor was supplied by General Electric, while Northrop team’s was from Martin Marietta; both teams chose the Westinghouse/Texas Instruments active electronically scanned array (AESA) radar.[N 2] The integrated electronics warfare and integrated communication, navigation, and identification avionics were selected by the SPO.[31] Although not required, both teams would employ flying avionics laboratories as well, with the Lockheed team using a modified Boeing 757 as a Flying Test Bed and the Northrop team using a modified BAC One-Eleven.[32] The avionics requirements were also the subject of SRRs and adjustments; as avionics was a significant cost driver, side-looking radars were deleted, and the dedicated IRST system was downgraded from requirement to goal and later to provision for future addition. In 1989, a $9 million per aircraft cost cap on avionics in FY 1985 dollars was imposed by the SPO to contain requirements creep.[16]

Finally, two examples of each prototype air vehicles were built and flown for Dem/Val: one with General Electric YF120 engines, the other with Pratt & Whitney YF119 engines.[10][33] Contractor teams made extensive use of analytical and empirical methods for their air vehicle designs, including wind tunnel testing, RCS pole testing, and software for computational fluid dynamics, RCS calculations, and computer-aided design.[N 3][34] Consistent with the SPO's willingness to give contractor teams the flexibility in determining how to achieve the ATF requirements, the flight test plans were created and executed by the teams themselves and the prototype air vehicles were not flown against each other for direct comparisons; neither the YF-22 nor YF-23 would have the same test points, which were set by their own teams to demonstrate concept viability and validated engineering predictions.[N 4][35] Noteworthy is the Lockheed team's complete redesign of their entire YF-22 configuration in summer of 1987 due to weight concerns, while the YF-23 was a continual refinement of Northrop's concept prior to Dem/Val proposal submission.[36][16][23]

 
Lockheed team's YF-22 and Northrop team's YF-23 flying in formation

The first YF-23 made its maiden flight on 27 August 1990 and the first YF-22 first flew on 29 September 1990.[37] Flight testing began afterwards and added the second aircraft for each competitor in late October 1990.[38] The first YF-23 with P&W engines supercruised at Mach 1.43 on 18 September 1990 and the second YF-23 with GE engines reached Mach 1.72 on 29 November 1990.[N 5][38][39] The YF-22 with P&W engines achieved Mach 1.43 and with GE engines achieved Mach 1.58 in supercruise.[40] Flight testing continued until December 1990 with the YF-22s accumulating 91.6 flight hours in 74 sorties while the YF-23s flew 65.2 hours in 50 sorties. While the prototype air vehicle designs were frozen in 1988 in order to build them and begin flight tests in 1990, both teams continued to refine their F-22 and F-23 designs for ATF full-scale development; following flight testing, the contractor teams submitted proposals on 31 December 1990.[N 6][38]

Selection and full-scale development edit

Main article: Lockheed Martin F-22 Raptor

Following a review of the flight test results and proposals, the USAF announced the YF-22 team and Pratt & Whitney as the competition winner for full-scale development, or engineering and manufacturing development (EMD), on 23 April 1991; by this time, the 1990 Major Aircraft Review by Defense Secretary Dick Cheney had reduced the planned total ATF buy to 650 aircraft.[41] Both designs met or exceeded all performance requirements; the YF-23 was stealthier and faster, but the YF-22 was more agile.[42] The US Navy had begun considering a version of the ATF called Navy Advanced Tactical Fighter (NATF) in 1986.[43] It has been speculated in the aviation press that the YF-22 was also seen as more adaptable to the NATF.[N 7][44] However, by late 1990 to early 1991, the Navy was beginning to back out of NATF due to escalating costs, and abandoned NATF completely by FY 1992.[19][45]

The selection decision has been speculated to have involved industrial factors and perception of program management as much as the technical merit of the aircraft designs.[46] At the time, Northrop was struggling with the B-2 and AGM-137 TSSAM programs in meeting cost, schedule, and predicted stealth performance.[22] In contrast, Lockheed's program management on the F-117 was lauded for meeting performance and delivering on schedule and within budget.[16] While the YF-23 air vehicle was in a higher state of maturity and refinement compared to the YF-22 due to the latter's late redesign and partly as a result had better flight performance, the Lockheed team executed a more aggressive flight test schedule with higher number of sorties and hours flown; furthermore, Lockheed also chose to execute high-visibility tests such as the firing missiles and high angle-of-attack maneuvers that, while not required, improved its perception by the USAF.[47] With the overall final F-22 and F-23 weapon systems competitive with each other in technical performance and meeting all requirements, the USAF decision then took into consideration non-technical aspects such as confidence in program management when determining the winner.[48][49][50]

 
The production F-22 Raptor.

The Lockheed team was awarded the EMD contract to develop and build the Advanced Tactical Fighter in August 1991. The YF-22 design was evolved to become the EMD/production F-22 Raptor version, which first flew in September 1997. However, with the dissolution of the Soviet Union in 1991 and the subsequent reductions in defense spending, the F-22's development would be "re-phased", or drawn out multiple times, and although the USAF adjusted its procurement goal to 381 aircraft, the funded program of record continued to decline, dropping to 337 by the time the EMD/production aircraft first flew.[51] Both the F-22 and F-23 designs were later considered for modification as a medium-range supersonic regional bomber (FB-22 and FB-23 respectively),[41] but the proposals have not come to fruition.[N 8][52] Following flight and operational testing, the F-22 entered service in December 2005, but with no apparent air-to-air threat present and the Department of Defense focused on counterinsurgency at that time, F-22 production only reached 195 aircraft and ended in 2011.[53][54]

See also edit

Notes edit

  1. ^ The JAFE program for the ATF engines were modified around this time as well to provide flightworthy examples for the prototypes, and the SPO would assume management of the ATF engine effort in February 1987.
  2. ^ The Westinghouse/Texas Instruments radar design would beat the Hughes/General Electric design and became the AN/APG-77.
  3. ^ For example, the Lockheed team conducted 18,000 hours of wind tunnel testing during Dem/Val.
  4. ^ The contractor teams were to give the SPO "sealed envelope" flight performance predictions against which their aircraft would be evaluated against, rather than against each other.
  5. ^ Speculation from aviation press reports suggests that the top supercruise speed of the YF-23 with GE engines was as high as Mach 1.8.[22]
  6. ^ The Lockheed and Northrop teams' NATF proposals, often referred to as "NATF-22" and "NATF-23" (they were never formally designated), were submitted in their full-scale development proposals as well.
  7. ^ Both NATF-22 and NATF-23 would have been significantly different from their Air Force counterparts, with the NATF-22 having variable-sweep wings and the NATF-23 being shortened while having canards and a more conventional vertical tail arrangement.
  8. ^ Also competing with these regional bomber designs was the B-1R.

References edit

Citations edit

  1. ^ a b Miller 2005, pp. 14, 19.
  2. ^ Sweetman 1991, p. 10-11, 21.
  3. ^ Aronstein and Hirschberg 1998, p. 5
  4. ^ Aronstein and Hirschberg 1998, pp. 17-18
  5. ^ Aronstein and Hirschberg 1998, p. 12
  6. ^ Metz 2017, pp. 8-10
  7. ^ Miller 2005, pp. 10-11
  8. ^ Sweetman 1991, pp. 12–13.
  9. ^ Aronstein and Hirschberg 1998, pp. 42-45
  10. ^ a b c YF-22 fact sheet Archived January 19, 2012, at the Wayback Machine. National Museum.
  11. ^ a b Miller 2005, p. 13.
  12. ^ a b Aronstein and Hirschberg 1998, pp. 45-54
  13. ^ Sweetman 1991, p. 13.
  14. ^ Aronstein and Hirschberg, pp. 105-106
  15. ^ Sweetman 1991, p. 14.
  16. ^ a b c d e f Hehs 1998, Part 2
  17. ^ a b c Aronstein and Hirschberg 1998, pp. 82-89
  18. ^ Miller 2005, p. 14.
  19. ^ a b Aronstein and Hirschberg 1998, pp. 235-239
  20. ^ Goodall 1992, p. 94
  21. ^ Aronstein and Hirschberg 1998, p. 164
  22. ^ a b c Chong 2016, pp. 237-238
  23. ^ a b Metz 2017, pp. 25-27
  24. ^ Miller 2005, pp. 19–20.
  25. ^ a b Aronstein and Hirschberg 1998, p. 104
  26. ^ Aronstein and Hirschberg 1998, p. 106
  27. ^ Sweetman 1991, p. 23.
  28. ^ Miller 2005, p. 23.
  29. ^ Aronstein and Hirschberg 1998, pp. 105–108.
  30. ^ Aronstein and Hirschberg 1998, p. 61
  31. ^ Aronstein and Hirschberg 1998, p. 181
  32. ^ Aronstein and Hirschberg 1998, pp. 113-115
  33. ^ YF-23 fact sheet Archived July 16, 2011, at the Wayback Machine. National Museum.
  34. ^ Aronstein and Hirschberg 1998, pp. 121-125
  35. ^ Aronstein and Hirschberg 1998, p. 137
  36. ^ Aronstein and Hirshberg 1998, p. 119
  37. ^ Goodall 1992, p. 99.
  38. ^ a b c Miller 2005, pp. 38–39.
  39. ^ Paul Metz, Jim Sandberg (27 August 2015). YF-23 DEM/VAL Presentation by Test Pilots Paul Metz and Jim Sandberg. Western Museum of Flight: Peninsula Seniors Production.
  40. ^ Goodall 1992, pp. 102–103.
  41. ^ a b Miller 2005, p. 38.
  42. ^ Goodall 1992, p. 110.
  43. ^ Pace 1999, pp. 19–22.
  44. ^ The Lockheed Martin F/A-22 Raptor Archived January 6, 2009, at the Wayback Machine. Vectorsite.net, 1 February 2007.
  45. ^ Miller 2005, p. 76.
  46. ^ Jouppi, Matt (30 April 2024). "What USAF's NGAD Program Can Learn From The Advanced Tactical Fighter". Aviation Week & Space Technology.
  47. ^ Aronstein and Hirschberg 1998, pp. 159-160
  48. ^ Metz 2017, p. 73
  49. ^ Aronstein and Hirschberg 1998, pp. 288-289
  50. ^ Abell, Eric "Rick" (1 February 2021). "Interview with Eric "Rick" Abell - Former Chief Engineer for the ATF Program" (Interview). Interviewed by C.W. Lemoine.
  51. ^ Miller 2005, pp. 38, 42–46.
  52. ^ Hebert, Adam J. "The 2018 Bomber and Its Friends". Air Force magazine, October 2006.
  53. ^ "F-22A Raptor goes operational". U.S. Air Force. 15 December 2005. Archived from the original on 23 July 2012. Retrieved 24 June 2011.
  54. ^ Parsons, Gary. "Final F-22 Delivered" Archived 13 March 2016 at the Wayback Machine Combat Aircraft Monthly, 3 May 2012. Retrieved 10 April 2014.

Bibliography edit

  • Aronstein, David C.; Hirschberg, Michael J.; Piccirillo, Albert C. Advanced Tactical Fighter to F-22 Raptor: Origins of the 21st Century Air Dominance Fighter. Arlington, Virginia: AIAA (American Institute of Aeronautics & Astronautics), 1998. ISBN 978-1-56347-282-4.
  • Chong, Tony (2016). Flying Wings & Radical Things, Northrop's Secret Aerospace Projects & Concepts 1939-1994. Forest Lake, Minnesota: Specialty Press. ISBN 978-1-58007-229-8.
  • Goodall, James C. "The Lockheed YF-22 and Northrop YF-23 Advanced Tactical Fighters". America's Stealth Fighters and Bombers, B-2, F-117, YF-22, and YF-23. St. Paul, Minnesota: MBI Publishing Company, 1992. ISBN 0-87938-609-6.
  • Hehs, Eric (16 October 1998). "Design Evolution of the F-22, Part 1 and 2". Code One. Lockheed Martin.
  • Jenkins, Dennis R. and Tony R. Landis. Experimental & Prototype U.S. Air Force Jet Fighters. North Branch, Minnesota: Specialty Press, 2008. ISBN 978-1-58007-111-6.
  • Metz, Alfred "Paul". Air Force Legends Number 220. Northrop YF-23 ATF. Forrest Lake, Minnesota: Specialty Press, 2017 ISBN 0989258378
  • Miller, Jay. Lockheed Martin F/A-22 Raptor, Stealth Fighter. Hinckley, UK: Midland Publishing, 2005. ISBN 1-85780-158-X.
  • Miller, Jay (1995). Lockheed Martin's Skunk Works: The Official History... Leicester, UK: Midland Publishing. ISBN 1-85780-037-0.
  • Mullin, Sherman N. (June 2012). "Winning the ATF" (PDF). Mitchell Institute for Airpower Studies.
  • Pace, Steve. F-22 Raptor. New York: McGraw-Hill, 1999. ISBN 0-07-134271-0.
  • Sweetman, Bill. YF-22 and YF-23 Advanced Tactical Fighters. St. Paul, Minnesota: Motorbooks International Publishing, 1991. ISBN 0-87938-505-7.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Advanced_Tactical_Fighter&oldid=1225246452"