User:Bigspace4/Electrochemical cell

Electrochemical Cell

edit

Copied from Electrochemical cell:

An electrochemical cell is a device capable of either generating electrical energy from chemical reactions or using electrical energy to cause chemical reactions. The electrochemical cells which generate an electric current are called voltaic or galvanic cells and those that generate chemical reactions, via electrolysis for example, are called electrolytic cells.[1][2][better source needed] A common example of a galvanic cell is a standard 1.5 volt cell[3][better source needed] meant for consumer use. A battery consists of one or more cells, connected in parallel, series or series-and-parallel pattern.

Proposed edits:

An electrochemical cell is a device that generates electrical energy from chemical reactions. Electrical energy can also be applied to these cells to cause chemical reactions to occur.[4]

A common example of electrochmical cells are Galvanic (Voltaic) Cells; where spontaneous Oxidation-Reduction reactions take place, generating current and heat which can be used to do work. Galvanic cells consist of two half-cells: consisting of separate oxidation and reduction reactions. Electrolytic cells are also common, generating non-spontaneous redox reactions by application of electrical energy.

When one or more electrochemical cells are conneced in parallel or series they make a battery. Primary cells are single use batteries, whereas Secondary cells, are rechargeable batteries.

Types of Electrochemical cells

edit

Galvanic Cell

edit

Copied from Electrochemical cell:

A galvanic cell, or voltaic cell, named after Luigi Galvani or Alessandro Volta respectively, is an electrochemical cell that derives electrical

 
Galvanic cell with no cation flow

energy from spontaneous redox reactions taking place within the cell.[5] It generally consists of two different metals connected by a salt bridge, or individual half-cells separated by a porous membrane.

Volta was the inventor of the voltaic pile, the first electrical battery. In common usage, the word "battery" has come to include a single galvanic cell, but a battery properly consists of multiple cells.[6]


Proposed Edits:

A galvanic cell (voltaic cell) named after Luigi Galvani (Alessandro Volta) is an electrochemical cell that generates electrical energy from spontaneous redox reactions. [5]

 
Galvanic cell with no cation flow

A wire connects two different metals (ex. Zinc and Copper). Each metal is in a separate solution; often the aqueous sulphate or nitrate forms of the metal, however more generally metal salts and water which conduct current.[7] A salt bridge or porous membrane connects the two solutions, keeping electric neutrality and the avoidance of charge accumulation. The metal's differences in oxidation/reduction potential drive the reaction until equilibrium.[4]

Key Features:

- spontaneous reaction

- generates electric current

- current flows through a wire, and ions flow through a salt bridge

- anode (negative), cathode (positive)

Half Cells:

edit

Copied from Electrochemical cell:

An electrochemical cell consists of two half-cells. Each half-cell consists of an electrode and an electrolyte.[8] The two half-cells may use the same electrolyte, or they may use different electrolytes. The chemical reactions in the cell may involve the electrolyte, the electrodes, or an external substance (as in fuel cells that may use hydrogen gas as a reactant). In a full electrochemical cell, species from one half-cell lose electrons (oxidation) to their electrode while species from the other half-cell gain electrons (reduction) from their electrode.

A salt bridge (e.g., filter paper soaked in KNO3, NaCl, or some other electrolyte) is often employed to provide ionic contact between two half-cells with different electrolytes, yet prevent the solutions from mixing and causing unwanted side reactions. An alternative to a salt bridge is to allow direct contact (and mixing) between the two half-cells, for example in simple electrolysis of water.

As electrons flow from one half-cell to the other through an external circuit, a difference in charge is established. If no ionic contact were provided, this charge difference would quickly prevent the further flow of electrons. A salt bridge allows the flow of negative or positive ions to maintain a steady-state charge distribution between the oxidation and reduction vessels, while keeping the contents otherwise separate. Other devices for achieving separation of solutions are porous pots and gelled solutions. A porous pot is used in the Bunsen cell.


Proposed Edits:

Galvanic cells consists of two half-cells. Each half-cell consists of an electrode and an electrolyte (both half cells may use the same or different electrolytes).

The chemical reactions in the cell involve the electrolyte, electrodes, and/or an external substance (fuel cells may use hydrogen gas as a reactant). In a full electrochemical cell, species from one half-cell lose electrons (oxidation) to their electrode while species from the other half-cell gain electrons (reduction) from their electrode.

A salt bridge (e.g., filter paper soaked in KNO3, NaCl, or some other electrolyte) is used to ionically connect two half-cells with different electrolytes, but it prevents the solutions from mixing and unwanted side reactions. An alternative to a salt bridge is to allow direct contact (and mixing) between the two half-cells, for example in simple electrolysis of water.

As electrons flow from one half-cell to the other through an external circuit, a difference in charge is established. If no ionic contact were provided, this charge difference would quickly prevent the further flow of electrons. A salt bridge allows the flow of negative or positive ions to maintain a steady-state charge distribution between the oxidation and reduction vessels, while keeping the contents otherwise separate. Other devices for achieving separation of solutions are porous pots and gelled solutions. A porous pot is used in the Bunsen cell.

Equilibrium Reaction
edit

Copied from Electrochemical cell:

Each half-cell has a characteristic voltage. Various choices of substances for each half-cell give different potential differences. Each reaction is undergoing an equilibrium reaction between different oxidation states of the ions: when equilibrium is reached, the cell cannot provide further voltage. In the half-cell that is undergoing oxidation, the closer the equilibrium lies to the ion/atom with the more positive oxidation state the more potential this reaction will provide. Likewise, in the reduction reaction, the closer the equilibrium lies to the ion/atom with the more negative oxidation state the higher the potential.


Proposed Edits:

Each half-cell has a characteristic voltage (depending on the metal and its characteristic reduction potential). Each reaction is undergoing an equilibrium reaction between different oxidation states of the ions: when equilibrium is reached, the cell cannot provide further voltage. In the half-cell performing oxidation, the closer the equilibrium lies to the ion/atom with the more positive oxidation state the more potential this reaction will provide.[4] Likewise, in the reduction reaction, the closer the equilibrium lies to the ion/atom with the more negative oxidation state the higher the potential.

Cell Potential
edit

Copied from Electrochemical cell:

The cell potential can be predicted through the use of electrode potentials (the voltages of each half-cell). These half-cell potentials are defined relative to the assignment of 0 volts to the standard hydrogen electrode (SHE). (See table of standard electrode potentials). The difference in voltage between electrode potentials gives a prediction for the potential measured. When calculating the difference in voltage, one must first rewrite the half-cell reaction equations to obtain a balanced oxidation-reduction equation.

  1. Reverse the reduction reaction with the smallest potential (to create an oxidation reaction/overall positive cell potential)
  2. Half-reactions must be multiplied by integers to achieve electron balance.

Cell potentials have a possible range of roughly zero to 6 volts. Cells using water-based electrolytes are usually limited to cell potentials less than about 2.5 volts due to high reactivity of the powerful oxidizing and reducing agents with water that is needed to produce a higher voltage. Higher cell potentials are possible with cells using other solvents instead of water. For instance, lithium cells with a voltage of 3 volts are commonly available.

The cell potential depends on the concentration of the reactants, as well as their type. As the cell is discharged, the concentration of the reactants decreases and the cell potential also decreases.

Electrolytic Cell

edit

Copied from Electrochemical cell:

An electrolytic cell is an electrochemical cell that drives a non-spontaneous redox reaction through the application of electrical energy. They

 
Nineteenth century electrolytic cell for producing oxyhydrogen

are often used to decompose chemical compounds, in a process called electrolysis—the Greek word lysis means to break up.

Important examples of electrolysis are the decomposition of water into hydrogen and oxygen, and bauxite into aluminium and other chemicals. Electroplating (e.g. of copper, silver, nickel or chromium) is done using an electrolytic cell. Electrolysis is a technique that uses a direct electric current (DC).

An electrolytic cell has three component parts: an electrolyte and two electrodes (a cathode and an anode). The electrolyte is usually a solution of water or other solvents in which ions are dissolved. Molten salts such as sodium chloride are also electrolytes. When driven by an external voltage applied to the electrodes, the ions in the electrolyte are attracted to an electrode with the opposite charge, where charge-transferring (also called faradaic or redox) reactions can take place. Only with an external electrical potential (i.e. voltage) of correct polarity and sufficient magnitude can an electrolytic cell decompose a normally stable, or inert chemical compound in the solution. The electrical energy provided can produce a chemical reaction which would not occur spontaneously otherwise.


Proposed edits:

An electrolytic cell is an electrochemical cell that drives a non-spontaneous redox reaction through the application of electrical energy.[9] They

 
A modern electrolytic cell consisting of two half reactions, two electrodes, a salt bridge, voltmeter, and battery.

are often used to decompose chemical compounds, in a process called electrolysis—the Greek word lysis means to break up.

Important examples of electrolysis are the decomposition of water into hydrogen and oxygen, and bauxite into aluminium and other chemicals. Electroplating (e.g. of copper, silver, nickel or chromium) is done using an electrolytic cell. Electrolysis is a technique that uses a direct electric current (DC).

An electrolytic cell has three characteristic components:

- an electrolyte

Usually a solution of water or other solvents in which ions are dissolved. Molten salts such as sodium chloride are also electrolytes. When driven by an external voltage applied to the electrodes, the ions in the electrolyte are attracted to an electrode with the opposite charge,

where charge-transferring (also called faradaic or redox) reactions can take place.

- two electrodes (a cathode and an anode)

Only with an external electrical potential (i.e. voltage) of correct polarity and sufficient magnitude can an electrolytic cell decompose a normally stable, or inert chemical compound in the solution. The electrical energy provided can produce a chemical reaction which would not occur spontaneously otherwise.

Key Features:- non-spontaneous reaction

- generates current

- current flows through a wire, and ions flow through salt bridge

- anode (positive), cathode (negative)

Primary Cell

edit

Copied from Electrochemical cell:

A primary cell is a galvanic battery that is designed to be used once and discarded, in contrast to a secondary cell (rechargeable battery),

which can be recharged with electricity and reused. In general, the electrochemical reaction occurring in the cell is not reversible, rendering the cell unrechargeable. As a primary cell is used, chemical reactions in the battery use up the chemicals that generate the power; when they are gone, the battery stops producing electricity and is useless. In contrast, in a secondary cell, the reaction can be reversed by running a current into the cell with a battery charger to recharge it, regenerating the chemical reactants. Primary cells are made in a range of standard sizes to power small household appliances such as flashlights and portable radios.

Primary batteries make up about 90% of the $50 billion battery market, but secondary batteries have been gaining market share. About 15 billion primary batteries are thrown away worldwide every year, virtually all ending up in landfills. Due to the toxic heavy metals and strong acids or alkalis they contain, batteries are hazardous waste. Most municipalities classify them as such and require separate disposal. The energy needed to manufacture a battery is about 50 times greater than the energy it contains.[10][11][12][13][better source needed] Due to their high pollutant content compared to their small energy content, the primary battery is considered a wasteful, environmentally unfriendly technology. Due mainly to increasing sales of wireless devices and cordless tools, which cannot be economically powered by primary batteries and come with integral rechargeable batteries, the secondary battery industry has high growth and has slowly been replacing the primary battery in high end products.


Proposed edits:

A primary cell produces current by irreversible chemical reactions (ex. small disposable batteries) and is not rechargeable.

They are used for their portability, low cost, and short lifetime.

 
A variety of standard sizes of primary cells. From left: 4.5V multicell battery, D, C, AA, AAA, AAAA, A23, 9V multicell battery, (top) LR44, (bottom) CR2032.

Primary cells are made in a range of standard sizes to power small household appliances such as flashlights and portable radios.

As chemical reactions procced in a primary cell, the battery use up the chemicals that generate the power; when they are gone, the battery stops producing electricity.

 
Circuit diagram of a primary cell showing difference in cell potential, and flow of electrons through a resistor.

Primary batteries make up about 90% of the $50 billion battery market, but secondary batteries have been gaining market share. About 15 billion primary batteries are thrown away worldwide every year,[14] virtually all ending up in landfills. Due to the toxic heavy metals and strong acids or alkalis they contain, batteries are hazardous waste. Most municipalities classify them as such and require separate disposal. The energy needed to manufacture a battery is about 50 times greater than the energy it contains.[10][11][12][13]Due to their high pollutant content compared to their small energy content, the primary battery is considered a wasteful, environmentally unfriendly technology. Due mainly to increasing sales of wireless devices and cordless tools, which cannot be economically powered by primary batteries and come with integral rechargeable batteries, the secondary battery industry has high growth and has slowly been replacing the primary battery in high end products.



Secondary Cell

edit

Copied from Electrochemical cell:

A secondary cell, commonly referred to as a rechargeable battery, is an electrochemical cell that can be run as both a galvanic cell and an electrolytic cell. This is used as a convenient way to store electricity: when current flows one way, the levels of one or more chemicals build up (charging); while it is discharging, they reduce and the resulting electromotive force can do work.

A common secondary cell is the lead-acid battery. This can be commonly found as car batteries. They are used for their high voltage, low costs, reliability, and long lifetime. Lead-acid batteries are used in an automobile to start an engine and to operate the car's electrical accessories when the engine is not running. The alternator, once the car is running, recharges the battery.


Proposed Edits:

 
Lead acid car battery (Secondary Cell)

A secondary cell produces current by reversible chemical reactions (ex. lead-acid battery car battery) and is rechargeable.

Lead-acid batteries are used in an automobile to start an engine and to operate the car's electrical accessories when the engine is not running. The alternator, once the car is running, recharges the battery.

It can perform as a galvanic cell and an electrolytic cell. It is a convenient way to store electricity: when current flows one way, the levels of one or more chemicals build up (charging); while it is discharging, they reduce and the resulting electromotive force can do work.

 
Circuit diagram of a secondary cell showing difference in cell potential, and flow of electrons through a resistor.

They are used for their high voltage, low costs, reliability, and long lifetime.







Fuel Cell

edit

Copied from Electrochemical cell:

A fuel cell is an electrochemical cell that converts the chemical energy from a fuel into electricity through an electrochemical reaction of

 
Scheme of a proton-conducting fuel cell

hydrogen fuel with oxygen or another oxidizing agent.[15][page needed] Fuel cells are different from batteries in requiring a continuous source of fuel and oxygen (usually from air) to sustain the chemical reaction, whereas in a battery the chemical energy comes from chemicals already present in the battery. Fuel cells can produce electricity continuously for as long as fuel and oxygen are supplied.

The first fuel cells were invented in 1838. The first commercial use of fuel cells came more than a century later in NASA space programmes to generate power for satellites and space capsules. Since then, fuel cells have been used in many other applications. Fuel cells are used for primary and backup power for commercial, industrial and residential buildings and in remote or inaccessible areas. They are also used to power fuel cell vehicles, including forklifts, automobiles, buses, boats, motorcycles and submarines.

There are many types of fuel cells, but they all consist of an anode, a cathode, and an electrolyte that allows positively charged hydrogen ions (protons) to move between the two sides of the fuel cell. At the anode a catalyst causes the fuel to undergo oxidation reactions that generate protons (positively charged hydrogen ions) and electrons. The protons flow from the anode to the cathode through the electrolyte after the reaction. At the same time, electrons are drawn from the anode to the cathode through an external circuit, producing direct current electricity. At the cathode, another catalyst causes hydrogen ions, electrons, and oxygen to react, forming water. Fuel cells are classified by the type of electrolyte they use and by the difference in startup time, which ranges from 1 second for proton-exchange membrane fuel cells (PEM fuel cells, or PEMFC) to 10 minutes for solid oxide fuel cells (SOFC). A related technology is flow batteries, in which the fuel can be regenerated by recharging. Individual fuel cells produce relatively small electrical potentials, about 0.7 volts, so cells are "stacked", or placed in series, to create sufficient voltage to meet an application's requirements.[16][better source needed] In addition to electricity, fuel cells produce water, heat and, depending on the fuel source, very small amounts of nitrogen dioxide and other emissions. The energy efficiency of a fuel cell is generally between 40 and 60%; however, if waste heat is captured in a cogeneration scheme, efficiencies up to 85% can be obtained.

The fuel cell market is growing, and in 2013 Pike Research estimated that the stationary fuel cell market will reach 50 GW by 2020.[17]


Proposed Edits:

A fuel cell is an electrochemical cell that reacts hydrogen fuel with oxygen or another oxidizing agent, to convert chemical energy to electricty.

 
Scheme of a proton-conducting fuel cell

Fuel cells are different from batteries in requiring a continuous source of fuel and oxygen (usually from air) to sustain the chemical reaction, whereas in a battery the chemical energy comes from chemicals already present in the battery.

Fuel cells can produce electricity continuously for as long as fuel and oxygen are supplied.

They are used for primary and backup power for commercial, industrial and residential buildings and in remote or inaccessible areas. They are also used to power fuel cell vehicles, including forklifts, automobiles, buses, boats, motorcycles and submarines.

Fuel cells are classified by the type of electrolyte they use and by the difference in startup time, which ranges from 1 second for proton-exchange membrane fuel cells (PEM fuel cells, or PEMFC) to 10 minutes for solid oxide fuel cells (SOFC).

There are many types of fuel cells, but they all consist of:

- anode

At the anode a catalyst causes the fuel to undergo oxidation reactions that generate protons (positively charged hydrogen ions) and electrons. The protons flow from the anode to the cathode through the electrolyte after the reaction. At the same time, electrons are drawn from the anode to the cathode through an external circuit, producing direct current electricity.

- cathode

At the cathode, another catalyst causes hydrogen ions, electrons, and oxygen to react, forming water.

- electrolyte

Allows positively charged hydrogen ions (protons) to move between the two sides of the fuel cell.

A related technology are flow batteries, in which the fuel can be regenerated by recharging. Individual fuel cells produce relatively small electrical potentials, about 0.7 volts, so cells are "stacked", or placed in series, to create sufficient voltage to meet an application's requirements.[18] In addition to electricity, fuel cells produce water, heat and, depending on the fuel source, very small amounts of nitrogen dioxide and other emissions. The energy efficiency of a fuel cell is generally between 40 and 60%; however, if waste heat is captured in a cogeneration scheme, efficiencies up to 85% can be obtained.

In 2022, the global fuel cell market was estimated to be $6.3 billion, and is expected to increase by 19.9% by 2030.[19] Many countries are attempting to enter the market by setting renewable energy GW goals.[20]




References

edit
  1. ^ "Electrolytic Cells". Georgia State University. Retrieved 2018-05-17.
  2. ^ "Electrochemical Cells". Georgia State University. Retrieved 2018-05-17.
  3. ^ "Electrochemical Cell". BYJU'S. Retrieved October 28, 2020.
  4. ^ a b c Wenzel, Thomas J. (2013-07-30). "Douglas A. Skoog, Donald M. West, F. James Holler, and Stanley R. Crouch: Fundamentals of analytical chemistry, 9th ed., international ed". Analytical and Bioanalytical Chemistry. 405 (25): 412–432. doi:10.1007/s00216-013-7242-1. ISSN 1618-2642.
  5. ^ a b Chemistry, Rice University, 2015. [Online]. Available: https://web.ung.edu/media/Chemistry2/Chemistry-LR.pdf
  6. ^ Gove, Philip Babcock, ed. (2002) [1961]. "battery". Webster's Third New International Dictionary, Unabridged. Merriam-Webster Inc. p. 187. ISBN 978-0-87779-201-7. 6 a: a combination of apparatus for producing a single electrical effect of dynamos b (1): a group of two or more cells connected together to furnish electrical current (2): a single voltaic cell
  7. ^ Ahmad, Dr. Zaki. Principles of corrosion engineering and corrosion control. ISBN 978-0-08-097134-6. OCLC 857524149.
  8. ^ Andrews, Donald H.; Richard J. Kokes (1962). "Electrochemistry". Fundamental Chemistry. New York: John Wiley & Sons, Inc.. p. 482.
  9. ^ Brett, C.M.A. (2018), "Standard Electrode Potentials and Application to Characterization of Corrosion Phenomena", Encyclopedia of Interfacial Chemistry, Elsevier, pp. 511–516, retrieved 2023-04-18
  10. ^ a b Hill, Marquita K. (2004). Understanding Environmental Pollution: A Primer. Cambridge University Press. p. 274. ISBN 978-0-521-82024-0. Manufacturing a disposable battery takes about 50 times more energy than the battery provides when used.
  11. ^ a b Watts, John (2006). Gcse Edexcel Science. Letts and Lonsdale. p. 63. ISBN 978-1-905129-63-8.
  12. ^ a b Wastebusters Ltd. (2013). The Green Office Manual: A Guide to Responsible Practice. Routledge. p. 96. ISBN 978-1-134-19798-9.
  13. ^ a b Danaher, Kevin; Biggs, Shannon; Mark, Jason (2016). Building the Green Economy: Success Stories from the Grassroots. Routledge. p. 199. ISBN 978-1-317-26292-3.
  14. ^ Communications, Cactus. "What if we could recycle the energy remaining in discarded batteries? Scientists now know how". techxplore.com. Retrieved 2023-04-18.
  15. ^ Khurmi, R. S.; Sedha, R. S. (2008). Materials Science. ISBN 978-81-219-0146-8.
  16. ^ Nice, Karim; Strickland, Jonathan (September 18, 2000). "How Fuel Cells Work". HowStuffWorks. Retrieved 4 August 2011.
  17. ^ Prabhu, Rahul R. (13 January 2013). "Stationary Fuel Cells Market size to reach 350,000 Shipments by 2022". Renew India Campaign. Archived from the original on January 19, 2013. Retrieved 2013-01-14.{{cite web}}: CS1 maint: unfit URL (link)
  18. ^ Qi, Zhaoxiang; Koenig, Gary M. (2017-07-01). "Review Article: Flow battery systems with solid electroactive materials". Journal of Vacuum Science & Technology B. 35 (4): 040801. doi:10.1116/1.4983210. ISSN 2166-2746.
  19. ^ "Fuel Cell Market Size, Share & Trends Analysis Report, 2030". www.grandviewresearch.com. Retrieved 2023-04-18.
  20. ^ "Mandatory renewable energy target", Wikipedia, 2023-04-10, retrieved 2023-04-18