Mission Elapsed Time (MET) is used by NASA during their space missions, most notably during their Space Shuttle missions. Due to the fact that timing is very consequential in a mission, all events after launch are scheduled on the Mission Elapsed Time. This avoids the constant rescheduling of events in case the launchtime slips. The MET-clock is set to zero at the moment of liftoff and counts forward in normal days, hours, minutes, and seconds. For example, 2:03:45:18 MET means it has been 2 days, 3 hours, 45 minutes, and 18 seconds since liftoff.[1][2] MET was formerly called Ground Elapsed Time (GET) prior to the Space Shuttle.[3]

The International Space Station (ISS) does not use an MET clock since it is a "permanent" and international mission. The ISS observes Greenwich Mean Time (UTC/GMT). The shuttles also had UTC clocks so that the astronauts could easily figure out what the "official" time aboard ISS was.[4]

In 2019, a test flight of the Boeing CST-100 Starliner spacecraft suffered a mission anomaly through an incorrectly set Mission Elapsed Time on the vehicle.[5]

References

edit
  1. ^ "Mission Elapsed Time explained". 1995-09-13. Archived from the original on 2007-07-18. Retrieved 2007-11-09.
  2. ^ "Ask the STS-113 crew: Question 14". 2002-12-07. Archived from the original on 2003-02-19. Retrieved 2007-11-09.
  3. ^ Orloff, Richard. "Apollo by the Numbers - Introduction".
  4. ^ Eds Musings from Space Expedition 7 astronaut Ed Lu, Updated: 09/08/2003 Accessed August 2007
  5. ^ Burghardt, Thomas (2019-12-23). "OFT Starliner Makes Early Landing at White Sands". NASASpaceFlight.com. Retrieved 2019-12-24.