Drum pump, barrel pump, and transfer pump refer to pumps that are used to empty barrels, tanks, IBCs and drums.[1] Many liquids used on manufacturing and processing plants are delivered in 100 or 200 litre barrels and are too heavy to tip to empty the liquids inside. Drum pumps range from simple siphon based devices to sophisticated highly-engineered machinery.

Drum pumps on barrels

Considerations

edit
  • Function - Is the purpose simply to empty the drum completely in one operation, to allow dispense-on-demand operations, or to provide a metered flow to a subsequent operations? Flow rate, pressure, control systems, etc. need to be specified.
  • Liquid being pumped - Product viscosity determines the type of pump mechanism. Heavy viscous liquids usually require positive displacement pumping head.
  • Special product characteristics - Acids, corrosives, or reactive liquids need special materials in the drum pumps. Food and pharmaceutical liquids also need special materials as well as a means of regular cleaning and sanitizing. Flammable liquids require special handling.

Manual

edit

Low cost manual pumps are used when product dispensing is periodically needed. Crank and lever driven pumps are available. Double-action piston drum pumps can be self priming, delivering liquid on both the forward and the back stroke.

Powered

edit

Unlike a submersible pump with the motor submerged, a drum pump has a drive motor above the container. Electric and pneumatic motors are available. The motor is attached to the vertical shaft at the top of the tube outside the drum and the pumping element is located at the end of the shaft inside the drum. This configuration allows the drum to be emptied without tipping and so reduces the risk of spills and operator injury.[2]

Hot melt drum pump

edit

Some materials are solid at ambient temperatures and must be melted to allow pumping. This might include open-head drums of hot-melt adhesive, heavy grease, etc. Several systems have been developed which use a heated platen placed on the material; the melted material is then pumped through a heated hose to its destination.[3][4][5]

See also

edit

References

edit
  1. ^ Michael Volk (7 April 2005). Pump Characteristics and Applications, Second Edition. CRC Press. pp. 259–. ISBN 978-1-4200-2835-5.
  2. ^ Westcott, Nancy (14 July 2020). "A Call to Keep Workers Safer When Transferring Flammable and Combustible Liquids". Modern Pumping Today. Retrieved 16 October 2020.
  3. ^ US 3758003, Kautz, Wilbert G. & German, Dale F., "Hot melt liquefying and pumping mechanism", published 1973-09-11, assigned to The Aro Corp. 
  4. ^ US 4073409, Gardner, James J. & Koppehele, Hugh P., "Hot melt dispenser with removeable pump in follower", published 1978-02-14, assigned to Fluid Kinetcis Inc. 
  5. ^ US 6964275, Moore, Leo M., "Hot melt dispensing apparatus and method", published 1976-09-28, assigned to Industrial Machine Service Co. 
edit