Artistic cycling is a form of competitive indoor cycling in which athletes perform tricks (called exercises) for points on specialized, fixed-gear bikes in a format similar to ballet or gymnastics. The exercises are performed in front of judges in five-minute rounds[1] by singles, pairs, four- or six-person teams.

Artistic cycling
Highest governing bodyUnion Cycliste Internationale
First played19th century
Characteristics
ContactNo
Mixed-sexNo
TypeCycle sports
EquipmentSpecialized bicycle
VenueIndoor court
Presence
Country or regionEurope, Asia
OlympicNo
World Games1989
headstand / handstand

History

edit
 
Kaufmann's Cycling Beauties

The first unofficial world championships in artistic cycling was held in 1888 by Swiss-American Nicholas Edward Kaufmann and was largely a publicity stunt to showcase his trick bicycling.

The first official world championships were held for men in 1956[1] and for women in 1970.

Bikes

edit
 
Specialised stunt bicycle
 
Pair artistic cycling

The bicycles used for artistic cycling are a form of fixed gear bicycle. The gearing of the chainring and sprocket are run at or near a one-to-one ratio, but the chainring may not have fewer teeth than the sprocket. The wheels must be of equal size and are closely spaced in order to make tricks, such as wheelies, easier to perform.

The handlebars are similar in form to a shallow drop handlebar found on a racing bicycle which has been turned upside down. Handlegrips or bar tape are applied to the top, horizontal portions of the bar. The handlebar, which can spin 360°, is mounted to a stem that has no horizontal extension, which puts the stem clamp in line with the steering axis and allows for the handlebars to remain in the same relative position no matter whether the front wheel is facing forward or backward.

The crank arm length may have a center to center distance of 130 to 170 mm.

Riding area

edit
 
a) length = 12.0 to 14.0 meters
b) width = 9.0 to 11.0 meters
c) inner circle = 0.5 meters diameter
d) middle circle = 4.0 meters diameter
e) outer circle = 8.0 meters diameter
f) stripes quartering = 0.5 meters
g) clear area = 0.5 to 2 meters

The riding area for artistic cycling is a wooden court, which also serves cycle ball competitions, that ranges in dimensions from 9 × 12 meters to 11 × 14 meters, where the maximum size is mandated for international competitions.

Three concentric circles are taped or painted at the center of the court with diameters (measured to the outside edge of the line) of 0.5, 4, & 8 meters. Four half-meter hashes extend radially from the four quadrants of the middle circle.

A clear area of 0.5 to 2 meters must be free of all immovable objects around the perimeter of the court. Two meters is required for international competitions.

Championships

edit
 
Katrin Schultheis and Sandra Sprinkmeier

See also

edit

References

edit
  1. ^ a b About Indoor Cycling, Artistic Cycling, UCI, Retrieved 18 April 2021
edit