Mtotin
Trauma Plate edit
A trauma plate, also known as a trauma pack, is a plate that is an add-on component/insert to a ballistic vest. Its primary purpose is to absorb and disrupt the kinetic energy of a bullet impact and reduce the blunt trauma transferred to the wearer of the vest. Trauma plates typically, also enhance ballistic value(how "bulletproof" it is) to the part of the vest that they are positioned behind.
Trauma plates are most commonly found in a pocket behind the front ballistic panel of a vest and positioned in the center of the chest. Some vests feature plate pockets in the back of the vest as well as the front. Some advanced tactical and demolition vests accommodate a multitude of trauma plates. Unique, high-end vests, like Dragon Skin(body armor), do away with traditional trauma plates and integrate, interlinked, miniature trauma plates as scale mail, to significantly enhance their vests' overall ballistic rating, while maintaining flexibility.
Shapes and Sizes edit
Trauma plates can be found in a variety of sizes and shapes. The most common shapes are rectangle, rounded rectangle and irregular hexagon.
In concealed vests(vests worn under a shirt), the trauma plates are most commonly 5" by 8", with variants including 5" by 7", 5" by 9", 6" by 8", and 6" by 9". Thickness(depth) varies based on material and application but rarely exceeds 1/4".
In tactical vests, worn as outerwear, the trauma plates are most commonly 10" by 12" with some variation depending on the vest. Thickness varies, depending on material and application, but rarely approaches 1/2".
In specialized/military-grade vests, a considerable portion of the vest is made up of rigid, trauma-plate like inserts. Since they are an essential part of the vest, they are NOT typically considered the same as trauma plates and are typically referred to as inserts, much like the aramid ballistic inserts found in concealed, duty, and tactical vests. SAPI vests are an example of these types of vests. In most SAPI based vests/carriers, the inserts make for most of the ballistic rating of the vest, and are therefore designed to provide maximum coverage, with inserts that are shaped to fit the carrier and have different sizes dependent on the sizing of the vest.
Materials edit
Most trauma plates are made of a combination of materials. The following categories denote the primary material used in different plate packages.
- Metal
- Most metal trauma plates are made primarily of steel or titanium. Aluminium and various alloys also exist. Metal trauma plates are typically considered the best for reducing blunt trauma, thanks to the conductive traits of the material.
- There are stories of bullets sliding or bouncing off of metal trauma plates and injuring the wearer(shots deflected off the chest and hitting the head). As of this writing, stories of such claims are unverified and unlikely, as the trauma plate is typically positioned behind the aramid fabric/panels of the vest, and the likeliness of a bullet passing through the fabric, ricocheting, and passing through more aramid fabric is very unlikely. However, to address this fear, many metal plates are encased in special materials designed to trap the bullet and/or its fragments.
- Ceramic
- Ceramic plates, typically composed of boron carbide or near variants, are very popular in military application. These materials offer very high ballistic value. However, they do not do very well at dispersing blunt trauma. As a result they are often backed with materials like aramid fabrics, high density plastics, and/or metals.
- Fabric
- Often called, Soft trauma plates, these are flexible plates that typically do little to reduce trauma. They are typically composed of layers of aramid fabrics, similar to, if not the same as the material found in the vest. They may also include thin sheets of metal or ultra high molecular weight polyethylene(UHMWPE) to add stiffness and some trauma protection.
- Plastic
- Multi-layered sheets/plates of ultra high molecular weight polyethylene(UHMWPE) can provide an added ballistic enhancement equal to or even greater than metal plates with less weight. With these, there is the cost of less trauma reduction and the improbable but possible risk of fracture.
- UHMWPE can be strewn into a thread when made, and woven into a fabric that competes in strength, flexibility, and weight to modern aramid fabrics, and may pose as an alternate material in future vests.
- Nanomaterials
- Proposed to be the future for both trauma plates and anti-ballistic fabrics, carbon nanotube and nanocomposite materials offer a new strength to weight ratio that exceeds current materials. For further information on these materials as applied to ballistics, please visit the section on ballistic vest nanomaterials in ballistics. Though nanotechnology processes are used to enhance modern ballistic materials, no "nanomaterials" are currently available in commercial products.
Special Threat Plates edit
Special threat plates(STP), also known as multi-threat, special purpose, rifle, and special application plates, are plates that have a notably higher ballistic rating(NIJ standard) than the vest. There is no standard for materials or ballistics for these plates, though most meet the NIJ Standard for armor type III. Many of these plates are made of a combination of materials, like ceramic on plastic, plastic on metal, etc.
Some manufacturers use these labels more for marketing, than really offering enhanced protection.
References edit
- Ballistic Resistance of Body Armor NIJ Standard-0101.06
- Wikipedia.org - Ballistic Vest
- The mind of Michael Totin
Your submission at Articles for creation edit
I noticed your submission in Articles for creation, Wikipedia talk:Articles for creation/Trauma Plate. Thanks! It will be reviewed by a volunteer soon.
Before it can be added to Wikipedia, your submission should have references. All articles on Wikipedia should have inline, numbered references after facts, showing the 'reliable source' (a newspaper, book, etc.) where the information can be checked, so that all information is verifiable.
Here's an example of how to add references:
He likes tea.<ref> Smith, John. "[http://foonews.com/Article42 Interview with Chzz]", Foo News, 1 April 2010. Retrieved 2011-05-22. </ref>
== References ==
{{reflist}}
That makes the references automatically display as small numbers[1] which will link to the details in the section titled == References == at the end. You can see that example in action here.
Please add references to your submission, which will be reviewed as soon as possible. See also, Wikipedia:Referencing for beginners. If you need any help, just put {{helpme}} at the end of this page, followed by a question or get into our live help chat chanel at #wikipedia-en-help connect.
Best, ChzzBot IV (talk) 00:12, 11 April 2012 (UTC)
Your submission at Articles for creation edit
- If you would like to continue working on the submission, you can find it at Wikipedia talk:Articles for creation/Trauma Plate.
- To edit the submission, click on the "Edit" tab at the top of the window.
- If you need any assistance, you can ask for help at the help desk, via real time chat with helpers, or on the
- Thank you for your contributions to Wikipedia! Aaron Booth (talk) 19:14, 17 April 2012 (UTC)
Welcome to Wikipedia! Need a hand? edit
|
Hello! Mtotin,
I noticed your article was declined at Articles for Creation, and that can be disappointing. If you are wondering or curious about why your article submission was declined please post a question at the Articles for creation help desk. If you have any other questions about your editing experience, we'd love to help you at the Teahouse, a friendly space on Wikipedia where experienced editors lend a hand to help new editors like yourself! See you there! SarahStierch (talk) 17:11, 21 April 2012 (UTC)
|
Your submission at Articles for creation edit
- If you would like to continue working on the submission, you can find it at Wikipedia talk:Articles for creation/Trauma Plate.
- To edit the submission, click on the "Edit" tab at the top of the window.
- If you need any assistance, you can ask for help at the help desk, via real time chat with helpers, or on the
Your submission at Articles for creation edit
- If you would like to continue working on the submission, you can find it at Wikipedia talk:Articles for creation/Trauma Plate.
- To edit the submission, click on the "Edit" tab at the top of the window.
- If you need any assistance, you can ask for help at the help desk, via real time chat with helpers, or on the
Your recent edits edit
Hello. In case you didn't know, when you add content to talk pages and Wikipedia pages that have open discussion, you should sign your posts by typing four tildes ( ~~~~ ) at the end of your comment. You could also click on the signature button 
or 
located above the edit window. This will automatically insert a signature with your username or IP address and the time you posted the comment. This information is useful because other editors will be able to tell who said what, and when they said it. Thank you. --SineBot (talk) 01:37, 3 May 2012 (UTC)
Your Articles for Creation article was rejected as there is a current article for that (Ceramic plate). User:SarahStierch suggested you could include your information to the current article. If you have questions and/or concerns, please ask me at my talkpage.
SwisterTwister talk 07:00, 10 May 2012 (UTC)
Your submission at Articles for creation edit
- If you would like to continue working on the submission, you can find it at Wikipedia talk:Articles for creation/Trauma Plate.
- To edit the submission, click on the "Edit" tab at the top of the window.
- If you need any assistance, you can ask for help at the help desk, via real time chat with helpers, or on the
In order to rename an article, you have to move it to the new name so that the history will be preserved. Copying and pasting into a new article doesn't work. ... discospinster talk 03:26, 14 May 2012 (UTC)
Thank you for the teaching. I tried to move the page myself, but it errored, stating that the page existed or was invalid, so I submitted a requested move. Hopefully this resolves the hard-ship I've encountered here over the past months. Thanks again. Mtotin (talk) 04:34, 17 May 2012 (UTC)
- hello, I noticed that you reverted my edits to Ceramic plate and you did not leave an edit summary as to your reasons. I removed the references and add an references need tag as the references were not valid for use in a Wikipedia article according to Wikipedia:Verifiability and Wikipedia:Identifying reliable sources, if you are not sure about a reference you can ask here Wikipedia:Reliable sources/Noticeboard Samuraiantiqueworld (talk) 07:17, 21 May 2012 (UTC)
Hi there, I'm HasteurBot. I just wanted to let you know that Wikipedia talk:Articles for creation/Trauma Plate, a page you created has not been edited in at least 180 days. The Articles for Creation space is not an indefinite storage location for content that is not appropriate for articlespace. If your submission is not edited soon, it could be nominated for deletion. If you would like to attempt to save it, you will need to improve it. You may request Userfication of the content if it meets requirements. If the deletion has already occured, instructions on how you may be able to retrieve it are available at WP:REFUND/G13. Thank you for your attention. HasteurBot (talk) 22:30, 18 August 2013 (UTC)
Your article submission Trauma Plate edit
Hello Mtotin. It has been over six months since you last edited your article submission, entitled Trauma Plate.
The page will shortly be deleted. If you plan on editing the page to address the issues raised when it was declined and resubmit it, simply and remove the {{db-afc}} or {{db-g13}} code. Please note that Articles for Creation is not for indefinite hosting of material deemed unsuitable for the encyclopedia mainspace.
If your submission has already been deleted by the time you get there, and you want to retrieve it, copy this code: {{subst:Refund/G13|Wikipedia talk:Articles for creation/Trauma Plate}}, paste it in the edit box at this link, click "Save", and an administrator will in most cases undelete the submission.
Thanks for your submission to Wikipedia, and happy editing. HasteurBot (talk) 16:01, 19 November 2013 (UTC)