PhD student and Graduate Fellow at The Ohio State University ElectroScience Laboratory, Department of Electrical and Computer Engineering, Columbus Ohio.
M.S. Electrical and Computer Engineering - The Ohio State University, ElectroScience Laboratory, Columbus Ohio, 2015.
B.S. Electrical Engineering - University of Texas at Dallas, Richardson, TX, December 2009.
[1] A. Kintz and I. Gupta, “RF emitter location estimation in the presence of antenna array manifold mismatch”, in Antennas and Propag. Soc. Int. Symp., 2012 IEEE, Jul. 2012.
[2] A. Kintz and I. Gupta, “Airborne antenna array calibration with signals of opportunity”, in Antennas and Propag. Soc. Int. Symp. (APSURSI), 2013 IEEE, Jul. 2013, pp. 1264–1265.
[3] A. Kintz and I. J. Gupta, “Spaceborne antenna array calibration with signals of opportunity”, in Proc. of the Antenna Measurement Techniques Assoc. 36th Annu. Meeting and Symp., Oct. 2013.
[4] A. Kintz and I. J. Gupta, “Use of satellite signals to calibrate GNSS receiver antenna arrays”, in Proc. of the Antenna Measurement Techniques Assoc. 36th Annu. Meeting and Symp., Oct. 2014.
[5] A. L. Kintz and I. Gupta, “A new approach to resolving emitter locations in the presence of antenna manifold mismatch”, in Antennas and Propag. Soc. Int. Symp., 2015 IEEE, Jul. 2015.
https://www.linkedin.com/pub/andrew-l-kintz/11/13/a09
andrew.kintz@gmail.com