The Rolling Bridge
|The Rolling Bridge|
|Designer||Thomas Heatherwick Studio|
|Engineering design||SKM Anthony Hunts and Packman Lucas|
|Material||Triangular steel segments, hydraulic actuators, lightweight deck|
|Total length||12 metres (39 ft)|
|Constructed by||Littlehampton Welding Ltd|
The Rolling Bridge is a type of curling movable bridge completed in 2004 as part of the Grand Union Canal office & retail development project at Paddington Basin, London. Despite the connotation of its name, it is more accurately described as "curling".
The Rolling Bridge was conceived by British designer Thomas Heatherwick, designed by SKM Anthony Hunt with Packman Lucas, and built by Littlehampton Welding Ltd. The Hydraulic design and development was done by Primary Fluid Power Ltd in the North West.
The bridge consists of eight triangular sections hinged at the walkway level and connected above by two-part links that can be collapsed towards the deck by hydraulic cylinders, which are concealed in vertical posts in the bridge parapets. When extended, it resembles a conventional steel and timber footbridge, and is 12 metres long. To allow the passage of boats, the hydraulic pistons are activated and the bridge curls up until its two ends join, to form an octagonal shape measuring one half of the waterway's width at that point.
The maintenance and opening of the bridge is managed by Merchant Square Estates and it is up every Friday at noon. Following on from the maintenance issues in 2008, the bridge has been repaired and was fully operational from April 2009.
In 2005, the bridge won the British Structural Steel Design Award.
"Rolling" as a name and as a type
While its designer refers to this particular structure as "The Rolling Bridge" on his website, this should probably be regarded as the name for this particular bridge rather than a term to refer to its type, which could be more accurately described as a "curling bridge". This name is used by some to refer to this bridge. At present, this curling bridge is the only one of its type known to be in existence.
Traditional use of the term "rolling bridge" dates from at least the Victorian era, and is used to describe a type of retractable drawbridge used to span a ditch or moat surrounding a fortification. That type of bridge is not hinged, and remains horizontal when it is rolled inside the gates of a fort. Modern versions are called retractable bridges or thrust bridges. One particular version of the rolling bridge type was known as the Guthrie rolling bridge, examples of which may still be seen at Fort Nelson, Portsmouth. Certain types of bascule bridges roll on an arc; an example is the Pegasus Bridge.
See also↑Jump back a section
- Rolling Bridge official site (www.heatherwick.com)
- Primary Fluid Powers Rolling Bridge Page. (www.primaryfp.co.uk)
- 2004 photo - bridge in curled position (waterway open)
- 2004 photo - bridge in curling/uncurling state
- 2004 photo - bridge in uncurled/extended position (waterway blocked)
- Rolling Bridge by Sándor Kabai, the Wolfram Demonstrations Project
- Meccano model of Heatherwick's Rolling Bridge by Alan Wenbourne
- Victorian Forts glossary