MyRIO is a real-time embedded evaluation board made by National Instruments. It is used to develop applications that utilize its onboard FPGA and microprocessor. It requires LabVIEW. It's geared towards students and basic applications.[1]
| Manufacturer | National Instruments |
|---|---|
| Available | In production |
| Website | www |
Specifications
edit(for myRIO-1900)
- Xilinx Z-7010 processor 667 MHz (ARM Cortex A9 x2 cores 28 nm process NEON SIMD, VFPv3 Vector Float)
- Memory: NV: 256 MB, DDR3 512MB, 533 MHz, 16 bits
- FPGA type same as processor
- Wireless: IEEE 802.11 b,g,n ISM 2.4 GHz 20 MHz.
- USB 2.0 Hi-Speed
- Breakout Board support
- 2 ports of 16 Digital I/O lines
- 3 axis accelerometer
- Max power consumption : 14 W
- Typical idle : 2.6 W
- LED's
Similar products
editThis section needs expansion. You can help by adding to it. (June 2016) |
cRIO (compactRIO) myDAQ
References
edit- ^ "From Student to Engineer: Preparing Future Innovators With the NI LabVIEW RIO Architecture — National Instruments". Ni.com. 2014-04-01. Retrieved 2016-07-26.