You can help expand this article with text translated from the corresponding article in German. (July 2016) Click [show] for important translation instructions.
|
Intermediate Data Format (IDF) files are used interoperate between electronic design automation (EDA) software and solid modeling mechanical computer-aided design (CAD) software.
The format was devised by David Kehmeier at the Mentor Graphics Corporation.[1]
The EMN File contains the PCB-Outline, the Position of the Parts, Positions of Holes and milling, keep out regions and keep in regions.
The EMP file contains the outline and height of the parts.
Some CAD software allows the use of a map file to load more detailed part models.[2]
Compared to STEP edit
STEP - also known as ISO 10303-21 - has both advantages and disadvantages over IDF.
If both MCAD and ECAD software support STEP, both programs can interchange more detailed models (at the cost of increased file size). Step models that are rendered correctly in the ECAD software can cause problems in the MCAD.
IDF does allow the communication of keep out areas and part placements more directly. IDF is a very simple and robust format. If necessary, the files can be edited by hand in a text editor.
External links edit
- IDF V3.0 Specification (PDF)
- IDF V4.0 Specification (PDF)
References edit
 | This computing article is a stub. You can help Wikipedia by expanding it. |