Indian locomotive class WCM-3

The Indian locomotive class WCM-3 is a class of 1.5 kV DC electric locomotives that was developed in 1958 by Hitachi for Indian Railways. The model name stands for broad gauge (W), Direct Current (C), Mixed traffic (M) engine, 3rd generation (3). They entered service in 1958. A total of 3 WCM-3 locomotives were built in Japan in 1958.

Indian locomotive class WCM-3
Type and origin Power type Electric Designer Hitachi Builder Hitachi Order number 55/459/18RE Model EM/3 Build date 1958 Total produced 3 Rebuilder Research Design and Standards Organisation Rebuild date August 5, 1976 Number rebuilt All 3
Specifications Configuration: ​  • AAR C-C  • UIC Co′Co′  • Commonwealth Co-Co Gauge 5 ft 6 in (1,676 mm) Bogies 3 Axle Cast Steel frame, Swing bolster with Equalizer beams Wheel diameter New:1,200 mm (3 ft 11 in), Half worn:1,182 mm (3 ft 10+1⁄2 in) and Full worn:1,114 mm (3 ft 8 in) Wheelbase 2,426 mm (8 ft 0 in) Length: ​  • Over couplers 19.583 m (64 ft 3 in)  • Over body 18.313 m (60 ft 1 in) Width 3.199 m (10 ft 5+15⁄16 in) Height 4.264 m (13 ft 11+7⁄8 in) Frame type 3 Axle Cast Steel frame Axle load 19.11 tonnes (18.81 long tons; 21.07 short tons) Loco weight 113.00 tonnes (111.22 long tons; 124.56 short tons) Sandbox cap. 24 sandboxes each with 63.5 Kg capacity Power supply 110 V DC Electric system/s 1.5 kV DC Overhead Earlier 3.0 kV DC Overhead Current pickup(s) pantograph Traction motors Hitachi HS-373-AR-16 ​  • Rating 1 hour 330A  • Continuous 231A Gear ratio 16:51 MU working Not possible Loco brake Air/Hand Train brakes Vacuum Compressor 7.00 kg/cm² Safety systems Slip man Control, Over voltage relay, No volt relay, Low pressure governor
Performance figures Maximum speed 120.7 km/h (75 mph) Power output: ​  • Starting Max:3,610 hp (2,690 kW)  • 1 hour Max:3,610 hp (2,690 kW)  • Continuous Max:2,460 hp (1,830 kW) Tractive effort: ​  • Starting 28,200 kgf (280 kN)  • 1 hour 16,900 kgf (170 kN)  • Continuous 10,220 kgf (100 kN) Factor of adh. 25
Career Operators Indian Railways Class EM/3 Numbers 20073-20076 Locale Central Railways Delivered 1958 First run ER:1958 CR:1961 Last run January 1995 Retired March 1995 Withdrawn 1995 Preserved none Scrapped After 1995 Disposition All 3 have been scrapped.

The WCM-3 served both passenger and freight trains for over 37 years. With the introduction of more modern types of locomotives and 25 KV AC electrification, all 3 were withdrawn in the mid 1990s after repeated failures. Today all 3 locomotives have been withdrawn from service and scrapped.

History

The history of WCM-3 begins in the late 1950s with the stated aim of the Indian Railways (IR) to remove steam locomotives working on the Eastern Railway (ER) after recommendation of Karnail Singh Fuel Committee. In the late 1950s the Kolkata Suburban Railway was established and electrified with overhead 3000V DC supply. So Indian Railways began to look at various designs.

Initially, Indian railways invited tenders to build locomotives to the new specification. The following responses were received:

• Hitachi submitted their model with 3600 hp with top speed of 105 km/h. They also had Co-Co bogies
• Vulcan Foundry and English Electric submitted their model with 3120 hp with top speed of 105 km/h.

Each company submitted their prototypes and Indian Railways designated these prototypes as the WCM-3 class and WCM-2 class respectively.

So Indian Railways decided to procure 3 3000 V DC electric locomotives from Hitachi. They are manufactured in Japan and shipped to India in 1958. These locomotives were the third mixed class electric locomotive to roam India and also had now common Co-Co wheel arrangement. Initially the WCM-3 class were known as EM/3 class. They were easily recognizable with their smaller size and separate light enclosures for the marker lights and the tail lamps (just above the buffers). They had their cab doors placed near the cab unlike the WCM-1 class.

The WCM-3 were first used on trains in the Kolkata suburban section and a black livery with a red lining in the middle. But by 1960 the Kolkata Suburban Railway was converted to 25,000 V AC, so the 3 year old WCM-3 units were rendered unusable. So Research Design and Standards Organisation (RDSO) decided to converted the quite new locomotives to run on the 1500V DC Power supply used in Central Railway (CR) without loss of power.

They began their CR zone service in 1961. The WCM-3 locomotives were used on many Express trains but had some problems and were relegated to hauling low speed passenger trains, shunting and freight duties only. In the mid 1990s Central Railways decided to withdraw these locomotives from service and all 3 units were scrapped with none preserved.

Former sheds

• Pune
• Kalyan (KYN)
• All the locomotives of this class has been withdrawn from service.

See also

• Rail transport in India § History
• Indian Railways
• Locomotives of India
• Rail transport in India

External links

• http://www.irfca.org/faq/faq-specs.html#WCM-3
• [1]
• India railway fan club