Indian locomotive class WAG-2

The Indian locomotive class WAG-2 was a class of 25 kV AC electric locomotives that was imported from Japan in the 1960s for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G) locomotive, 2nd generation (2). A total of 45 WAG-2 were built by The Japanese Group (a consortium of Mitsubishi, Hitachi and Toshiba) between 1964 and 1965. They entered service in 1964.

Indian locomotive class WAG-2
Type and origin Power type Electric Builder Mitsubishi, Toshiba, Hitachi Build date 1964–1965 Total produced 45
Specifications Configuration: ​  • AAR B-B  • UIC Bo-Bo Gauge 5 ft 6 in (1,676 mm) Bogies Monomotor B-B bogies Wheel diameter New:1,140 mm (3 ft 9 in) Half worn: 1,120 mm (3 ft 8 in) Full worn: 1,064 mm (3 ft 6 in) Length 14.600 m (47 ft 10+13⁄16 in) Width 3.152 m (10 ft 4+3⁄32 in) Height 4.165 m (13 ft 7+31⁄32 in) Axle load 19,000 kg (42,000 lb) Loco weight 76,000 kg (168,000 lb) Electric system/s 25 kV 50 Hz AC AC Overhead Current pickup(s) pantograph Traction motors Mitsubishi MB 3045-A (745hp, 725V, 815A, 1000 rpm, weight 2200kg). Loco brake Air Train brakes vacuum train brakes.
Performance figures Maximum speed 80 km/h (50 mph) Power output MAX:3500HP Continuous: 3,450 hp (2,573 kW) Tractive effort Starting : 25,240 kgf (247.5 kN; 55,600 lbf)
Career Operators Indian Railways Numbers 20804-848 Locale CR earlier ER Disposition Retired and all scrapped

The WAG-2 served both passenger and freight trains for over 37 years. As of January 2001, all locomotives have been withdrawn from service. All were scrapped.

History

These locomotives were built by a consortium of Mitsubishi, Hitachi and Toshiba (The Japanese Group, as attested by a plaque fixed on their sides) as a second option to the Europeans WAG-1. They were delivered in 1964 and were higher powered than the WAM-1 but had similar Bo-Bo wheel arrangement (4 wheels per bogie) with four Hitachi DC traction motors connected to the wheels permanently in parallel through a WN geared drive. The WAG-2 had Ignitron rectifiers just like the WAG-1 but some were later refitted with Excitron rectifiers. Some even had the Mitsubishi logo painted on their sides.

These have not been retrofitted with air train brakes. Like the WAG-1 they were also used around the ER-SER-NER-NR circuit as it was the first AC electrified area and hauled ordinary passenger trains and freights only. They were also used double-headed for freight trains. They had Four traction motors permanently coupled in parallel are fed by ignitron rectifiers. Speed control is by a tap changer on the input transformer. Mitsubishi transformer, 20 taps. Oerlikon exhauster and compressor, Arno rotary converter. They were homed at Asansol Loco Shed of Eastern Railways and then transferred to Bhusawal and Itarsi sheds of CR in 1985. Due to aging these locomotives were withdrawn in 2001. None have been preserved.

Specifications

• Manufacturer:The Japanese Group (consortium of Hitachi, Mitsubishi and Toshiba)
• Build dates: 1964-65
• Wheel arrangement: B-B (monomotor bogies like WAG 1)
• Traction Motors: Hitachi EFCO HKK (1270 kW, 1250 V, 1080 A, 695 rpm, weight 5300 kg).
• Transformer: Hitachi AFI AMOC. 32 taps.
• Rectifiers: AEV-48 silicon rectifiers, 2040 A / 2550 kW.
• Pantographs: Two Faiveley AM-12

Locomotive shed

• All locomotives of this class had been withdrawn from service.

See also

• Rail transport in India#History
• Indian Railways
• Locomotives of India
• Rail transport in India

External links

• [IRFCA] Indian Railways FAQ: Locomotives—Specific classes : AC Electric
• [IRFCA] Indian Railways FAQ: Diesel and Electric Locomotive Specifications
• 11081 Colour Photographs, Indian Railways