Radiance is a suite of tools for performing lighting simulation originally written by Greg Ward.[1] It includes a renderer as well as many other tools for measuring the simulated light levels. It uses ray tracing to perform all lighting calculations, accelerated by the use of an octree data structure. It pioneered the concept of high-dynamic-range imaging, where light levels are (theoretically) open-ended values instead of a decimal proportion of a maximum (e.g. 0.0 to 1.0) or integer fraction of a maximum (0 to 255 / 255). It also implements global illumination using the Monte Carlo method to sample light falling on a point.

Radiance
Developer(s)Greg Ward
Initial release1985; 39 years ago (1985)
Stable release5.4 (2023-11-05) [±]
Preview releaseNon [±]
Written inC
Operating systemUnix, Linux, OS X, Windows
LicenseProject-specific open source
Websitehttp://www.radiance-online.org

Greg Ward started developing Radiance in 1985 while at Lawrence Berkeley National Laboratory. The source code was distributed under a license forbidding further redistribution. In January 2002 Radiance 3.4 was relicensed under a less restrictive license.

One study found Radiance to be the most generally useful software package for architectural lighting simulation. The study also noted that Radiance often serves as the underlying simulation engine for many other packages.[2]

HDR image format

edit
Radiance HDR image
Filename extension
.pic, .hdr, .rgbe, .xyze
Internet media type
image/vnd.radiance
Uniform Type Identifier (UTI)public.radiance[3]
Developed byRandolph Fritz, Greg Ward
Initial release4 March 2009; 15 years ago (2009-03-04)
Type of formatImage file formats
Standardhttp://radsite.lbl.gov/radiance/refer/filefmts.pdf
Open format?open source
Websitehttp://radsite.lbl.gov/radiance/

Radiance defined an image format for storing HDR images, now described as RGBE image format. Since it was the first (and for a long time the only) HDR image format, this format is supported by many other[which?] software packages.[citation needed]

The file starts with the signature '#?RADIANCE' and then several lines listing the commands used to generate the image. This information allows the renderer rpict to continue a partially completed render (either manually, or using the rad front-end). There are also key=value declarations, including the line 'FORMAT=32-bit_rle_rgbe'.

After this is a blank line signifying the end of the header. A single line describes the resolution and pixel order. As produced by the Radiance tools this always takes the form of '-Y height +X width'. After this line follows the binary pixel data.

Radiance calculates light values as floating point triplets, one each for red, green and blue. But storing a full double precision float for each channel (8 bytes × 3 = 24 bytes) is a burden even for modern systems. Two stages are used to compress the image data. The first scales the three floating point values to share a common 8-bit exponent, taken from the brightest of the three. Each value is then truncated to an 8-bit mantissa (fractional part). The result is four bytes, 32 bits, for each pixel. This results in a 6:1 compression, at the expense of reduced colour fidelity.

The second stage performs run length encoding on the 32-bit pixel values. This has a limited impact on the size of most rendered images, but it is fast and simple.

Scene description format

edit

A radiance scene is made from one or more object files. The .rad format is a simple text file. It can specify individual geometric objects, as well as call programs by starting a line with an exclamation point '!'.[4]

When specifying geometry the first line is

modifier type name

The following three lines contain parameters starting with an integer specifying the number of parameters. The parameters need not be on the same line, they can be continued on multiple lines to aid in readability.

Modifiers create materials and can be chained together, one modifying the next.

For example:

myball.rad

chrome sphere ball
0
0
4       0       0       10
       10

This can then be arrayed in another file using the xform program (described later):

scene.rad

void metal chrome
0
0
5       0.8     0.8     0.8
        0.9     0.0

!xform -a 5 -t 20 0 0 myball.rad

This creates a chrome material and five chrome spheres spaced 20 units apart along the X-axis.

Before a scene can be used, it must be compiled into an octree file ('.oct') using the oconv tool. Most of the rendering tools (see below) use an octree file as input.

Tools

edit

The Radiance suite includes over 50 tools. They were designed for use on Unix and Unix-like systems. Many of the tools act as filters, taking input on standard input and sending the processed result to standard output. These can be used on the Unix command line and piped to a new file, or included in Radiance scene files ('.rad') themselves, as shown above.

Geometry manipulation

edit

Several radiance programs manipulate Radiance scene data by reading from either a specified file or their standard input, and writing to standard output.

  • xform allows an arbitrary number of transformations to be performed on a '.rad' file. The transformations include translation, rotation (around any of the three axes), and scaling. It also can perform multi-dimensional arraying.
  • replmarks replaces certain triangles in a scene with objects from another file. Used for simplifying a scene when modelling in a 3D modeller.

Generators

edit

Generators simplify the task of modelling a scene, they create certain types of geometry from supplied parameters.

  • genbox creates a box.
  • genrprism extrudes a given 2D polygon along the Z-axis.
  • genrev creates a surface of revolution from a given function.
  • genworm creates a worm given four functions - the (x, y, z) coordinates of the path, and the radius of the worm.
  • gensurf creates a tesselated surface from a given function.
  • gensky creates a description for a CIE standard sky distribution.

Geometry converters

edit

Radiance includes a number of programs for converting scene geometry from other formats. These include:

  • nff2rad converts NFF objects to Radiance geometry.
  • obj2rad convert Wavefront .obj files to Radiance geometry.
  • obj2mesh convert Wavefront .obj files to a Radiance compiled mesh. This can then be included in a scene using the recently added mesh primitive. More efficient than using obj2rad and includes texture coordinates.

Rendering

edit
  • rpict is the renderer, producing a Radiance image on its standard output.
  • rvu is an interactive renderer, opening an X11 window to show the render in progress, and allowing the view to be altered.
  • rtrace is a tool for tracing specific rays into a scene. It reads the parameters for these rays on its standard input and returns the light value on standard output. rtrace is used by other tools, and can even be used to render images on its own by using the vwray program to generate view rays to be piped to it.
  • dayfact is an interactive script to compute luminance values and daylight factors on a grid.
  • findglare takes an image or scene and finds bright sources that would cause discomforting glare in human eyes.
  • mkillum takes a surface (e.g. a window or lamp shade) and computes the lighting contribution going through it. This data is then used by the illum material modifier to make lighting from these secondary sources more accurate and efficient to compute.

Image manipulation and analysis

edit
  • pfilt filters an image. The common technique to achieve anti-aliased images is to render several times larger than the desired size, and then filter the image down using pfilt.
  • pcompos composites images, either with anchor coordinates or by adding several images on top of another.
  • pcond conditions images. Can simulate a number of effects of the human visual response e.g. defocusing dark areas, veiling due to glare, and colour loss due to mesopic or scotopic vision in low light.
  • pinterp interpolates between two images provided they both have z buffers. Uses rtrace to fill in gaps. Is used to speed up the rendering speed of simple animations.
  • ximage is an image viewer for viewing HDR Radiance images. It can adjust the simulated exposure and apply some of the human visual effects of pcond.

Integration

edit
  • rad is a front-end which reads a '.rif' file describing a scene and multiple camera views. Previously, make and a makefile were used in a similar role. rad coordinates oconv, mkillum, rpict/rview and other programs to render an image (or preview) from the source scene file(s).
  • trad is a GUI front-end to rad using Tcl/Tk.
  • ranimate is a front-end which coordinates many programs to generate virtual walk-through animations i.e. the camera moves but the scene is static.

References

edit
  1. ^ Luebkeman, Chris; Simondetti, Alvise (June 25–30, 2006), "Practice 2006: Toolkit 2020", Intelligent Computing in Engineering and Architecture: 13th EG-ICE Workshop, Springer, p. 442, ISBN 3-540-46246-5.
  2. ^ Geoffrey G. Roy, A Comparative Study of Lighting Simulation Packages Suitable for use in Architectural Design, Murdoch University, October 2000
  3. ^ "CGImageSource.SupportedTypes". Claris FileMaker MBS Plug-in. MonkeyBread Software.
  4. ^ James D. Murray; William vanRyper (April 1996). Encyclopedia of Graphics File Formats, Second Edition. O'Reilly. ISBN 1-56592-161-5. Retrieved 2014-02-27.

Sources

edit
  • Greg Ward Larson and Rob Shakespeare, Rendering with Radiance, Morgan Kaufmann, 1998. ISBN 1-55860-499-5
edit