International Mobile Telecommunications-2020 (IMT-2020 Standard) are the requirements issued by the ITU Radiocommunication Sector (ITU-R) of the International Telecommunication Union (ITU) in 2015 for 5G networks, devices and services.[1]

On February 1, 2021, the standard was published as Recommendation ITU-R M.2150-0 titled Detailed specifications of the radio interfaces of IMT-2020,[2] but most of it was finalized years earlier.[3] For example the requirements for radio access technologies listed below were adopted in November 2017.[4] Following the publication of the requirements the developers of radio access technologies such as 3GPP and ETSI are expected to develop 5G technologies meeting these requirements. 3GPP is developing radio access technologies 5G NR, LTE-M and NB-IoT that together are expected to meet all requirements,[5] while ETSI is developing DECT-2020 NR and Nufront is developing EUHT (Enhanced Ultra High Throughput).

Requirements

edit

The following parameters are the requirements for IMT-2020 5G candidate radio access technologies.[6] Note that these requirements are not intended to restrict the full range of capabilities or performance that candidate for IMT-2020 might achieve, nor are they intended to describe how the technologies might perform in actual deployments.

Capability Description 5G requirement Usage scenario
Downlink peak data rate Minimum maximum data rate technology must support 20 Gbit/s eMBB
Uplink peak data rate 10 Gbit/s eMBB
User experienced downlink data rate Minimum data rate in dense urban test environment 95% of time (5th percentile) 100 Mbit/s eMBB
User experienced uplink data rate 50 Mbit/s eMBB
Latency Radio network contribution to packet travel time 4 ms eMBB
1 ms URLLC
Mobility Maximum speed for handoff and QoS requirements 500 km/h eMBB/URLLC
Connection density Total number of devices per unit area 106/km2 mMTC
Energy efficiency Data sent/received per unit energy consumption (by device or network) Equal to 4G eMBB
Area traffic capacity Total traffic across coverage area 10 Mbps/m2 eMBB
Peak downlink spectrum efficiency Throughput per unit wireless bandwidth and per network cell 30 bit/s/Hz eMBB

References

edit
  1. ^ "ITU defines vision and roadmap for 5G mobile development". www.itu.int. Archived from the original on 2020-05-23. Retrieved 2019-04-15.
  2. ^ "ITU towards "IMT for 2020 and beyond"". ITU. Retrieved 2021-08-17.
  3. ^ "What Is IMT-2020?". SDxCentral.
  4. ^ "Minimum requirements related to technical performance for IMT-2020 radio interface(s)". ITU. November 2017. Retrieved 28 August 2019.
  5. ^ "LTE-M and NB-IoT meet the 5G performance requirements". ITU. 9 December 2018. Retrieved 28 August 2019.
  6. ^ "Minimum requirements related to technical performance for IMT-2020 radio interface(s)" (PDF). ITU. November 2017. Retrieved 28 August 2019.
edit