Talk:Piping

Am I doing this right?

I just signed-up. I run Piping Design Central, which is an information site. Am I doing this right?

Edit: Most of my discussion list members are on email. Is it easy for them to contribute? I assume that I'm more web-savvy than most of them are. —Preceding unsigned comment added by Pipingguy (talk • contribs) July 2, 2004 (UTC)

You did fine except for signing your name and for putting a subject on your comment (which I did for you). Next time, click on the +Tab at the top of this Discussion page or the Edit page. That will bring up a comment form with a space at the top for entering the subject of your comment (Capitalize only the first letter of the first word ... nothing else). Then write your question or comment or response. And always, always sign your name ... which is done by simply writing four tildes like this: ~~~~. That will automatically sign your name and list the date and time as well. Welcome! - mbeychok 02:22, 26 June 2006 (UTC)

transmission of water

the difference between pumping and booster main Vallimohan 13:41, 25 August 2006 (UTC)

Is there a question there? Please clarify. - mbeychok 18:06, 19 September 2006 (UTC)

Pipe stress analysis checklist

Please help me to find a comprehensive pipe stress analysis checklist.

Thanks —The preceding unsigned comment was added by Farhad.ss (talk • contribs) 04:10, 13 May 2007 (UTC).

Your question would be better addressed at a place like the Coade discussion forum or the Engineering Tips Piping and Fluid Mechanics discussion. Ultimate ed 20:49, 13 September 2007 (UTC)

Piping schedule

Hi i want to know about schedule in pipe. what is meant by schedule. vivek203.187.133.203 (talk) 22:19, 18 March 2008 (UTC)

check vavle use to vertical pipe

Dear sir,

Check valve use vertical pipe, correct or wrong. somebody told check valve use only horizontal only or diffending upon fiuld. which is correct?...

my e-mail id. kandasamy_2005@yahoo.com —Preceding unsigned comment added by 122.165.2.221 (talk) 07:22, 8 May 2008 (UTC)

It will depend on the direction of the flow of the liquid. but there are spring check valves MFR'D which could be used in both directions of flow.Joe sunbelt. —Preceding unsigned comment added by Joe sunbelt (talk • contribs) 15:49, 26 June 2008 (UTC)

---

Only Swing type check valve can't be in vertical position. So you can use waffer check valve for vertical positions.

AntoOnlineJobs (talk) 04:07, 4 January 2009 (UTC) [1] —Preceding unsigned comment added by AntoOnlineJobs (talk • contribs) 04:04, 4 January 2009 (UTC)

chemical compatabilty of HDPE

Is it resistant to caustic soda at ambiet temperature? joe sunbelt. —Preceding unsigned comment added by Joe sunbelt (talk • contribs) 15:42, 26 June 2008 (UTC)

pipeline engg. and piping engg

please somebody specify the exact difference between piping and pipeline engineering...... —Preceding unsigned comment added by Praphulkp (talk • contribs) 09:35, 5 March 2010 (UTC)

mirror image design on process unit multiple trains

Is there any logical rule on why not mirror image process design units when several trains are part of the design? — Preceding unsigned comment added by 72.37.249.100 (talk) 22:17, 10 July 2012 (UTC)

External links modified

Hello fellow Wikipedians,

I have just added archive links to one external link on Piping. Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

• Added archive https://web.archive.org/20060529120337/http://catalog.asme.org:80/books/PrintBook/Process_Piping_Complete_Guide.cfm to http://catalog.asme.org/books/PrintBook/Process_Piping_Complete_Guide.cfm

When you have finished reviewing my changes, please set the checked parameter below to true to let others know.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—^{cyberbot II}_{Talk to my owner:Online} 03:19, 8 January 2016 (UTC)

External links modified (January 2018)

Hello fellow Wikipedians,

I have just modified 2 external links on Piping. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added {{dead link}} tag to http://catalog.asme.org/Codes/PrintBook/B311_2004_Power_Piping.cfm
• Added archive https://web.archive.org/web/20130222182143/http://publications.usace.army.mil/publications/eng-manuals/EM_1110-1-4008_sec/EM_1110-1-4008.pdf to http://publications.usace.army.mil/publications/eng-manuals/EM_1110-1-4008_sec/EM_1110-1-4008.pdf
• Added archive https://web.archive.org/web/20130210024919/http://publications.usace.army.mil/publications/eng-manuals/EM_1110-1-4008_sec/toc.htm to http://publications.usace.army.mil/publications/eng-manuals/EM_1110-1-4008_sec/toc.htm

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 00:22, 24 January 2018 (UTC)

Piping vs. Plumbing

I am not a native speaker but the subject of both articles seems to overlap to a high degree.

Piping might be the more general term while plumbing mostly refers to buildings. But since large parts of the information is relevant to both articles it seems to make sense to maybe include Plumbing into Piping.

KaiKemmann (talk) 01:41, 1 October 2018 (UTC)

"Piping" is the union set of "plumbing" and "drainage". "Plumbing" is for water supply and NOT sewerage. "Drainage" is for sewerage. 202.75.86.136 (talk) 07:22, 12 April 2019 (UTC)

Article needs permanent protection

This article needs permanent protection from malicious and perverted "contributors" so that only registered editors can work on it. Peter Horn User talk 23:36, 11 May 2019 (UTC)