Printrbot is a 3D printer company created by Brook Drumm in 2011 and originally funded through Kickstarter. Printrbot printers use fused deposition modelling to manufacture 3-dimensional artifacts.

Printrbot
Industry3D Printing
Founded2011
FounderBrook Drumm
Headquarters,
Websiteprintrbot.com

Printrbot's older designs including STLs are publicly available on GitHub.[1]

History

edit

Printbot was founded by Brook Drumm in 2011 as Printbot, Inc.[2]

Printrbot was the most funded technology project on Kickstarter when in December 2011, it raised US $830,827 through crowdfunding.[3]

It closed operations in 2018 due to "low sales".[4][5] It resurfaced again in 2020 as Printbot, LLC. Drumm is also the CEO.[2]

Design and operation

edit

Models are printed by depositing molten ABS or PLA plastic filament onto a hotbed from a print head which moves about the X and Z axes using stepper-motors, guided by metal threaded rods.[6] The models to be printed are sent to the printer via a USB interface using specialized software such Repetier-Host (recommended by the manufacturer for use with newer printers) or Pronterface (recommended by the manufacturer at the time of Printrbot's initial launch).

Assembly

edit

Printrbot has sold both fully assembled printers and build it yourself kits.[7]

Filament

edit

Printrbot models can print in ABS or PLA plastic filament which can be purchased from the official store or other sources.[8] Printrbot models can be outfitted to accept 1.75 mm or 3.0 mm diameter filament. The filament is available in many colors. Although the Printrbot hotend and extruder system is advertised to work with PLA and ABS, it is also capable of extruding many other filaments. Printrbot sells "exotic" filaments such as Nylon, Ninjaflex, and Carbon fiber-reinforced PLA.

Hardware

edit

All Printrbots are controlled by nearly similar open source circuit boards called Printrboards. The Printrboard has experienced several revisions and is identified by revision letters printed on them. For example, the most recent official revision of the Printrboard is Rev F, which can be purchased separately. The Printrboard can have many types of firmware loaded on it, but they are sold with an open-source firmware from the RepRap Project called Marlin. The printer is controlled through a USB interface.[9][6]

Printrbot had an exclusive arrangement with Carl Ubis[10] to use his Ubis Hot Ends in the Printrbot printers. A hot end is the part of the 3D printer that melts the filament and extrude it out of the nozzle to make your 3D print.

Software

edit

Printrbot does not come with any software and the official getting started guide recommends using the freeware program Cura 1.5 with Pronterface to interface with the printer. A freeware program with 3D visualization called Repetier-Host is also used.

Cura is one software option for driving your Printrbot printer.[11]

The Printrbot interprets G-code produced by a computer program called a slicer, turning commands into outputs for four stepper motors, heated bed and extruder outputs, and a cooling fan port.[12]

Import 3D models (oftentimes STL files from Thingiverse or user created in apps like Autodesk Fusion 360). The user can rotate and scale the 3D model to fit the virtual print bed. They can then convert the 3D model into G-Code that the printrbot can understand.

The user can then print directly to their printrbot via USB or use a SD or miniSD card to transfer the print file.

Printrbot in education

edit

At the beginning of 2015, Printrbot announced two new initiatives to help schools gain access to 3D printers.[13] The first program, named Printrbot Ambassadors, let registered schools borrow an assembled Printrbot Simple Metal with an Alu handle, spool holder and 1 kg of filament for a month for cost of shipping. After the month, the school had the option to buy the 3D printer at a reduced price or to send it back to Printrbot. The second program allowed schools to buy a Printrbot Simple Metal at a discount. Users needed to buy through a school and agree to be featured on a public listing. As of August 2, 2015, approximately 126 schools and universities were using Printrbot 3D printers.[14]

Models

edit

Current models

edit
Model Model No. Years available Build volume (mm) Build volume (in) Filament
Printrbot Pro Limited Release 2020 2020 12" x 12" x 12" 12" x 12" x 12" Any filament. Yes, any.
Printrbot Metal Plus 1412 2014–2018 250 mm × 250 mm × 250 mm 10 in × 10 in × 10 in ABS+PLA
Printrbot Play[15] 1505 2015–2018 100 mm × 100 mm × 130 mm 4 in × 4 in × 5 in PLA
Printrbot CNC Beta 01[16] 2014–2018 360 mm × 460 mm × 100 mm 14 in × 18 in × 4 in N/A
Printrbot Crawlbot[17] 2015–2018 1,219 mm × 2,438 mm × 51 mm 48 in × 96 in × 2 in N/A
Printbot Go Large V2 2015-2018 330 mm × 610 mm 13 in × 24 in ABS

Printrbot Pro

edit

On May 14, 2015, Brook Drumm introduced the Printrbot Pro,[18] a large-scale 3D printer. According to Drumm, the Printrbot Pro has a build volume of about 2 cubic feet, a heated bed, a dual-extruder setup with the ability to print multiple materials. The printer also offers an optional enclosed build chamber, an LCD panel, a SD card slot as well as LED lighting.

Printrbot Play and Play v2

edit
Model Model No. Image Color offered Year available Build volume (mm) Build volume (inch) Min. Layer Height (micron) Filament Connectivity Comments
Play 1505 Red, Black, White, Gray
Play V2 [1] White 2018 150 mm × 200 mm × 150 mm 5.9 in × 7.9 in × 5.9 in 50 USB-tether Limited offers (<10 sold?)

Discontinued models

edit
Model Model No. Image Years available Build volume (mm) Build volume(inch) Filament Comments
Printrbot Smalls 2016? 100 mm x 100 mm x 150 mm 4in x 4in x 6in PLA and PLA-composites Metal Kit build. Extra use of 3D-printed parts in printer pieces...
Printrbot Simple Metal 1403   2014–2018 150 mm × 150 mm × 150 mm 6 in × 6 in × 6 in 1.75 mm PLA (Heated build platform for ABS use available)
Printrbot Simple 2014 1405 100 mm × 100 mm × 100 mm 4 in × 4 in × 4 in 1.75 mm PLA only Largest model available
Printrbot Jr. 150 mm × 150 mm × 150 mm 6 in × 6 in × 6 in PLA only Can be folded for storage.
Printrbot LC 1302 or 1308 150 mm × 150 mm × 150 mm 6 in × 6 in × 6 in ABS+PLA
Printrbot GO 2013 200 mm × 180 mm × 150 mm 8 in × 7 in × 6 in PLA+ABS Suitcase form factor, designed in collaboration with Ben Heck
Printrbot (original)   150 mm × 150 mm × 150 mm 6 in × 6 in × 6 in ABS

See also

edit

References

edit
  1. ^ Drumm, Brook (2019-08-23). "printrbot designs". GitHub. Retrieved 2022-02-15.
  2. ^ a b "Brook Drumm Personal Website". brookdrumm.com. Retrieved 2023-02-12.
  3. ^ Dobby, Christine (April 18, 2012). "A case for crowdfunding; New U.S. rules for raising growth capital spark Canadian funding worries". FinancialPost.com. National Post. Retrieved Nov 18, 2012.
  4. ^ "Printrbot, Lincoln-based maker of inexpensive 3D printers, files for bankruptcy". bizjournals.com. 2018-08-08. Retrieved 2023-02-12.
  5. ^ "A Farewell to Printrbot". Hackaday. 2018-07-19. Retrieved 2018-08-13.
  6. ^ a b Stephen Cass,"A desktop 3-D printer builds plastic objects layer by layer", MIT Technology Review, April 25, 2012
  7. ^ "Printrbot Play Review: Ideal for Beginners". All3DP. 2015-11-26. Retrieved 2023-02-12.
  8. ^ ""Printrbot shop"". Archived from the original on 2016-03-04. Retrieved 2012-11-17.
  9. ^ "Printrbot: Your First 3D Printer", Kickstarter, Nov 17, 2011
  10. ^ "UBIS Hotend on an Ultimaker | Ultimaker: 3D Printers". ultimaker.com. Archived from the original on 2017-03-12.
  11. ^ "The PrintrBot Simple and CURA/Flash and Get the Software/Then Go, Go, GO!". Instructables. Retrieved 2023-02-12.
  12. ^ "Listening to G-Code and the PrintrBot Simple (1403)". Instructables. Retrieved 2023-02-12.
  13. ^ "Printrbot and Education – Two New Programs | Printrbot Learn". Archived from the original on 2018-07-18. Retrieved 2016-02-04.
  14. ^ "Printrbots in Schools | Printrbot". Archived from the original on 2016-06-24. Retrieved 2016-02-04.
  15. ^ "Printrbot Play (4x4x5)". Printrbot.com. Printrbot. Retrieved 8 June 2015.
  16. ^ "Printrbot CNC Beta 01 | Printrbot". printrbot.com. Archived from the original on 2015-03-14.
  17. ^ "Crawlbot | Printrbot". printrbot.com. Archived from the original on 2015-10-11.
  18. ^ "Brook Drumm announces large-scale Printrbot Pro 3D printer featuring a two-cubic foot build volume". 3ders.org. 2015-05-15. Retrieved 2023-02-12.
edit