A hotend is a component used in fused filament deposition 3D printers. Its purpose is to heat up and melt filament material for depositing into the intended shape.

The hotend is usually made of a bulk heat-conductive material with an internal resistive heater, coupled with a thermistor for precise temperature control. In common desktop 3D printer designs, the heater is located near the nozzle, and a heatsink is attached upstream (on the colder side).[1] A heat break component made of dissimilar metals can be used to limit heat transfer to filament above, increasing the controllability of the melted filament.[2][3]

Nozzle

edit

The nozzle is an interchangeable tip attached to the hotend with a small diameter hole through which the melted filament is extruded. In desktop fused filament deposition printers, different sized nozzle holes can be used to balance between printing speed and precision. Common large sized ones (1.0mm) extrude more material per travel length whereas smaller sized nozzles (0.2mm) result in higher quality.[4]

In consumer desktop printers, the nozzle is often made of brass or stainless steel. Desired characteristics include abrasion resistance, as the nozzle frequently slides across the printed object, and thermal conductivity. To improve thermal conductivity, nozzles can be perforated with multiple holes on the intake side, forming an internal structure with more contact area between the heated nozzle body and the filament.[5] This results in a higher maximum volumetric flow, which can improve printing speed.

See also

edit

References

edit
  1. ^ "Hotend: Definition, Types, How It Works, Advantages, and Disadvantages". Xometry. 2023-04-28. Retrieved 2024-04-21.
  2. ^ "Testing BiMetallic Heat Breaks". CNC Kitchen. 2021-02-20. Retrieved 2024-04-21.
  3. ^ "All You Need to Know About 3D Printer Heat Break". All You Need to Know About 3D Printer Heat Break. Retrieved 2024-04-21.
  4. ^ "0.4mm Vs 0.6mm Nozzle for 3D Printing – A Closer Look at the Tradeoffs". 0.4mm Vs 0.6mm Nozzle for 3D Printing – A Closer Look at the Tradeoffs. Retrieved 2024-04-21.
  5. ^ "Bondtech CHT High Flow Nozzle Reviewed". CNC Kitchen. 2021-10-23. Retrieved 2024-04-21.