Crepe rubber is coagulated latex that is rolled out in crinkled sheets and commonly used to make soles for shoes and boots but also a raw material for further processed rubber products.

Latex collection from a rubber tree

Processing

edit

After the collection of the latex milk, sodium sulphite (Na2SO3) or ammonia is added to prevent coagulation.[1]

When the latex arrives in the factory, sodium bisulphite (NaHSO3) or sodium metabisulphite (Na2S2O3) are added to prevent enzymatic reactions and discoloring.[1]

Sodium para toluene thiophenate (an aromatic mercaptan) is often added as a bleaching agent.[1]

Colloidal latex is then mixed with formic acid to cause it to coagulate. The coagulum is processed in a "creping battery", a series of machines that crush, press, and roll the coagula. The sheets are then hung in a heated drying shed and, after drying, sorted by grade and packed for shipping.[1]

Types

edit

There are several types and grades of rubber crepe, mainly distinguished by the grade and pre-processing of the latex used in their manufacture.[2]

  • Pale latex crepe (PLC) is a premium grade, made from raw field latex.
  • Estate brown crepe (EBC) is made from "cup lump" (raw, naturally coagulated rubber from the collection cup) and other coagula.
  • Re-milled crepe is made from "wet slab coagulum" (cured latex, still wet from the coagulation tanks), latex sheets (unsmoked) and cup lump.
  • Smoked blanket crepe is made from thick sheets of latex that have been processed in a smoker.
  • Flat bark crepe is made from scraps and other poor quality raw product.
edit

References

edit
  1. ^ a b c d Manufacture of latex crepe rubber (pdf-document), Raw Rubber Process Development & Chemical Engineering Dept., Rubber Research Institute of Sri Lanka, Ratmalana, January 2016
  2. ^ Cecil, John; Mitchell, Peter; Diemer, Per; Griffee, Peter (2013). "Processing of Natural Rubber, Manufacture of Latex-Grade Crepe Rubber". ecoport.org. FAO, Agricultural and Food Engineering Technologies Service. Retrieved March 19, 2013.